journal article·2025-04-22

Tailoring 7075 alloys for semisolid state processing via in-situ formed TiAl 3

João Paulo de Oliveira Paschoal, André Victor Rodrigues Dantas, Fernando Almeida da Silva Fernandes, Hipolito Domingo Carvajal Fals, Vinoy Thomas, Eugênio José Zoqui

Publisher page

Abstract

Traditional 7075 aluminum alloys are difficult to cast due to low viscosity and high shrinkage. This study addresses these challenges by forming TiAl 3 particles in situ, which enhance viscosity, reduce porosity, and prevent shrinkage cracks. The method involves adding a titanium master alloy to molten 7075 and using mechanical stirring to induce TiAl 3 formation. This improves processability, making the alloy suitable for high-pressure die casting (HPDC) in the aerospace and automotive industries. Microstructural analysis confirms that uniformly distributed TiAl 3 particles refine grains and enhance stability. The study employs microscopy, X-ray diffraction, thermodynamic simulations, and mechanical testing to validate structural properties, advancing 7075 alloy processing for large-scale applications in semisolid techniques.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials and Manufacturing Department, Faculty of Mechanical Engineering, University of Campinas, UNICAMP, , Campinas, SP, Brazil

Department of Materials Science and Engineering, University of Alabama at Birmingham, Birmingham, AL, USA

Funding

Fundação de Amparo à Pesquisa do Estado de São Paulo · Conselho Nacional de Desenvolvimento Científico e Tecnológico

References (34)

Show source-provided references
1. Davis JR. (editor) ASM Specialty handbook: aluminum and aluminum alloys. Ohio, USA: ASM Int., 1996, 1–784. DOI:https://doi.org/10.1361/autb2001p351.
2. Murray MT, Murray M. High pressure die casting of aluminium and its alloys 2010 fundamentals of aluminium metallurgy: production. Process Appl 2011; 217–261. DOI: https://doi.org/10.1533/9780857090256.1.217
3. ASTM International. ASTM B179-18 Standard specification for aluminum alloys in Ingot and Molten forms for castings from all casting processes. 2018. DOI: https://doi.org/10.1520/B0179-1810.1520/B0179-18 ↗
4. 10.1023/B:JMSC.0000048735.50256.9610.1023/B:JMSC.0000048735.50256.96 ↗
5. 10.1016/S0924-0136(01)00494-010.1016/S0924-0136(01)00494-0 ↗
6. 10.1016/S0921-5093(03)00528-810.1016/S0921-5093(03)00528-8 ↗
7. 10.1016/j.msea.2008.01.05710.1016/j.msea.2008.01.057 ↗
8. 10.1016/S0921-5093(02)00473-210.1016/S0921-5093(02)00473-2 ↗
9. 10.1016/j.msea.2004.05.00410.1016/j.msea.2004.05.004 ↗
10. 10.1016/j.matdes.2011.05.04010.1016/j.matdes.2011.05.040 ↗
11. Zoqui EJ. Alloys for semisolid processing. Compr Mater Process 2023; 5: 163–190. DOI: 10.1016/B978-0-08-096532-1.00520-3
12. 10.1016/S1003-6326(09)60364-210.1016/S1003-6326(09)60364-2 ↗
13. 10.1016/S1003-6326(10)60593-610.1016/S1003-6326(10)60593-6 ↗
14. Yang B, Mao W, Song X. Microstructure characteristics and mechanical properties of rheocasting 7075 aluminum alloy. China Foundry 2013; 10: 277–281.
15. 10.4028/www.scientific.net/MSF.618-619.61110.4028/www.scientific.net/MSF.618-619.611 ↗
16. 10.1179/02670830422501234110.1179/026708304225012341 ↗
17. 10.1007/BF0276540210.1007/BF02765402 ↗
18. 10.1007/s11663-024-03353-210.1007/s11663-024-03353-2 ↗
19. 10.1016/j.powtec.2013.07.00510.1016/j.powtec.2013.07.005 ↗
20. 10.1016/j.jallcom.2015.09.00510.1016/j.jallcom.2015.09.005 ↗
21. 10.1016/j.commatsci.2018.07.01110.1016/j.commatsci.2018.07.011 ↗
22. 10.1557/jmr.2014.12310.1557/jmr.2014.123 ↗
23. 10.1016/j.msea.2020.13943510.1016/j.msea.2020.139435 ↗
24. Bian T, Huang H, Lin X, et al. Effects of cooling rate and Ti content on the solidification characteristics of Al-Ti alloys. J Mater Eng Perf 2024: 1–16. DOI: https://doi.org/10.1007/s11665-024-09773-0
25. 10.1007/s11663-019-01675-010.1007/s11663-019-01675-0 ↗
26. 10.1007/s11669-018-0673-910.1007/s11669-018-0673-9 ↗
27. 10.1016/j.msea.2021.14214810.1016/j.msea.2021.142148 ↗
28. 10.1016/j.actamat.2024.11990910.1016/j.actamat.2024.119909 ↗
29. 10.1016/j.msea.2024.14697410.1016/j.msea.2024.146974 ↗
30. 10.1016/j.matchar.2017.12.00410.1016/j.matchar.2017.12.004 ↗
31. 10.1016/j.msea.2020.13943510.1016/j.msea.2020.139435 ↗
32. 10.3390/ma1409220610.3390/ma14092206 ↗
33. 10.1140/epjb/s10051-023-00643-710.1140/epjb/s10051-023-00643-7 ↗
34. 10.2355/isijinternational.31.107610.2355/isijinternational.31.1076 ↗