journal article·2026-04

Influence of aging heat treatment on microstructure and mechanical properties of CuAl9Ni3Fe3 bronze

Ivana Marković, Marko Banković, Dragan Manasijević, Ljubiša Balanović, Jasmina Petrović

Materials Science and Technology· Volume 42· Issue 6
Publisher page

Abstract

The influence of solution and aging treatment on the microstructure and mechanical properties of a low nickel/iron CuAl9Ni3Fe3 alloy were studied using the scanning electron microscope (SEM) and measuring hardness, tensile strength, elongation, and microhardness of the main phases. The alloy exhibits a complex microstructure, consisting of a mixture of the different κ precipitates distributed in α or β/β’ phases, which was significantly dependent on conducted heat treatments. After optimal heat treatment (quenching from 900°C/1 h; aging at 400°C/1 h), the hardness and tensile strength significantly increased compared to an as-cast alloy of approximately 60% and 110%, respectively. The excellent mechanical properties are attributed to the precipitation of the nano κ phase from β’ martensite matrix during aging.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Belgrade, Technical Faculty in Bor

Serbia Zijin Copper RBM Branch Majdanpek, Majdanpek, Serbia

Funding

Ministarstvo Prosvete, Nauke i Tehnološkog Razvoja

References (42)

Show source-provided references
1. 10.1590/1980-5373-mr-2020-033510.1590/1980-5373-mr-2020-0335 ↗
2. 10.1016/j.ijfatigue.2015.09.01410.1016/j.ijfatigue.2015.09.014 ↗
3. 10.1016/j.triboint.2020.10651910.1016/j.triboint.2020.106519 ↗
4. Alkelae F, Sasaki S. Microstructures generated by nickel aluminium bronze alloy L-PBFed and their effect on tribological and mechanical properties. Jurnal Tribologi 2021; 29: 41–56.
5. 10.34088/kojose.40581010.34088/kojose.405810 ↗
6. 10.1007/BF0054872810.1007/BF00548728 ↗
7. Sláma P, Dlouhý J, Kövér M. Influence of heat treatment on the microstructure and mechanical properties of aluminium bronze. Mater Tech 2014; 48: 599–604.
8. 10.1016/S1003-6326(07)60258-110.1016/S1003-6326(07)60258-1 ↗
9. 10.1557/jmr.2016.45510.1557/jmr.2016.455 ↗
10. Richardson I. Guide to nickel aluminium bronze for engineers. McLean: Copper Development Association, 2016.
11. 10.3390/ma908065210.3390/ma9080652 ↗
12. 10.3390/met503169510.3390/met5031695 ↗
13. Gavrilova R, Petkov RI. Researches on the structure and properties of heat treated, nickel alloyed, molybdenum modified aluminum bronze. Bulg Chem Commun 2013; 45: 644–648.
14. 10.1016/j.addma.2022.10285910.1016/j.addma.2022.102859 ↗
15. 10.1038/s41598-023-44146-y10.1038/s41598-023-44146-y ↗
16. 10.2478/afe-2014-004010.2478/afe-2014-0040 ↗
17. 10.3390/ma1706133010.3390/ma17061330 ↗
18. 10.1016/j.jmst.2020.05.02410.1016/j.jmst.2020.05.024 ↗
19. 10.1016/j.msea.2023.14545810.1016/j.msea.2023.145458 ↗
20. 10.3390/ma1509320910.3390/ma15093209 ↗
21. 10.1088/2051-672X/ac7a5110.1088/2051-672X/ac7a51 ↗
22. 10.1016/j.matlet.2022.13366110.1016/j.matlet.2022.133661 ↗
23. Jain P, Nigam PK. Influence of heat treatment on microstructure and hardness of nickel aluminium bronze (Cu-10Al-5Ni-5Fe). J Mech Civ Eng 2013; 4: 16–21.
24. 10.1016/j.corsci.2015.05.03710.1016/j.corsci.2015.05.037 ↗
25. Shirazabad MM, Karimi A, Babakhani A. The effects of aging treatment parameters on microstructure and hardness of aluminium bronze alloy. In: Proceeding of 3th International Conference on Materials Heat Treatments, Ishafan, Iran, 30-31 May 2012. paper no. 2577711019.
26. Nigam PK, Jain P. Effect of heat treatment on tensile and compression strength of nickel aluminium bronze (Cu-10%Al-5%Ni-5%Fe). Arch Appl Sci Res 2013; 5: 224–230.
27. Sadawy MM. The influence of heat treatment on tribological properties of Cu-Al-Fe-Ni shape memory alloy. EIJEST 2020; 29: 43–50.
28. 10.1016/j.addma.2019.10087210.1016/j.addma.2019.100872 ↗
29. Meigh CH. Cast and wrought aluminium bronzes properties, processes and structure. McLean: Copper Development Association, 2008, p 3.
30. 10.1016/j.mtcomm.2024.10815210.1016/j.mtcomm.2024.108152 ↗
31. 10.1179/imr.1982.27.1.7710.1179/imr.1982.27.1.77 ↗
32. 10.1007/BF0264667210.1007/BF02646672 ↗
33. Hyatt CV. Review of literature related to microstructure development during laser surface engineering of nickel aluminum bronze. Dartmouth, Canada: Technical memorandum for the Defence Research Establisnment Atlantic, DREA-TM-96-227, 1997.
34. ASTM E3-11:2017. Standard Guide for Preparation of Metallographic Specimens.
35. ASTM E407-07:2015. Standard Practice for Microetching Metals and Alloys.
36. https://thermocalc.com (2024 accessed 12 June 2024).10.46607/iamj12062024 ↗
37. 10.1007/BF0264287010.1007/BF02642870 ↗
38. Howell P. On the phases, microconstituents, and microstructures in nickel aluminium bronzes. Report. USA: Copper Development Association, 1997.
39. 10.1016/S1003-6326(22)65995-810.1016/S1003-6326(22)65995-8 ↗
40. Böhm J, Linhardt P, Strobl S, et al. Microstructure of a heat treated nickel-aluminum bronze and its corrosion behavior in simulated fresh and sea water. Mater Perform Charact 2016; 5: 689–700.
41. 10.1007/s40194-017-0536-810.1007/s40194-017-0536-8 ↗
42. McCaw RL, Wong C. Evaluation of nickel aluminum bronze weldability, Report. USA: Naval Surface Warfare Center Carderock Division, 2002.