Show source-provided references
6. Zhu M, Cai Z, Zhou Z. Fretting Wear Theory. Beijing: Science Press, 2021.
7. Zhu M, Cai Z, Zhou Z. Fretting wear under special condition. Beijing: Science Press, 2022.
10. Xiang H, Ren P, Zhang X, et al. Fretting damage behavior of NC30Fe nickel-based alloy under alternating load conditions. Tribology 2014; 34: 437–445.
11. Dong C, Bai X, Yan X, et al. Research Status and advances on tribological study of materials under ocean environment. Tribology 2013; 33: 311–320.
12. Chen Y, Chen L, Bian G, et al. Corrosion protection control and calendar life design of advanced carrier-based aircraft. Acta Aeronauti Astronaut Sin 2021; 42: 525786.
13. Royhman D, Patel M, Jacobs J, et al. In vitro simulation of fretting-corrosion in hip implant modular junctions: The influence of pH. Med Eng Phys 2016; 52: –9.
14. Wei S, Lv S, Jiang J, et al. Similarity model test on rainfall scouring mechanism of high-speed railway subgrade slope. Appl Sci 2024; 14: 44.
22. Mahendran L, Kumar L, El KM, et al. Evaluation of time-dependent corrosion inhibition rate for f-MWCNT-BCP composite coatings on 316L stainless steel in simulated body fluid for orthopedic implantation. Appl Biochem Biotech 2023; 196: 1544–1557.
27. Zeng Q, Xu Y, Lin N. Tribocorrosion behaviors of 304 stainless steel in artificial seawater. Surf Technol 2020; 49: 194–202+212.
28. Wang D, Qiang Q, Xia C, et al. Tribocorrosion behavior of FH36 steel in simulated seawater with different salinity. Tribology 2023; 43: 64–72.
31. Beomdeok S, Hideyuki K, Masashi N, et al. Corrosion and antibacterial performance of 316L stainless steel with copper patterns by super-spread wetting of liquid copper. Surf Coat Tech 2023; 462: 129496. doi:https://doi.org/10.1016/J.SURFCOAT.2023.129496
53. Hongyan D. Synergism between Corrosion and Wear of Aluminum Alloy & Titanium Alloy in Rain or Sea Water Environment. Nanjing, China: Nanjing University of Aeronautics and Astronautics, 2007.
55. Nie Y, Dai J, Zhang X. Synergistic effects of corrosion and wear resistance of Mg-3Gd-1Zn alloy in simulated body fluid. Mater Rep 2019; 33: 3057–3061.
59. Liu M, Li G, Zhou C, et al. Analysis of 3D morphology and scratch hardness of copper under large constant load. Tribology 2021; 41: 467–473.