Achieving bimodal microstructure and enhanced tensile properties of Mg-6Sn-3Al-1Zn alloy by tailoring deformation amount during pack rolling
Source abstract
Abstract
The Mg-6Sn-3Al-1Zn alloys were pack-rolled with various amounts of deformation at 400°C. The results indicated that a bimodal microstructure formed after pack-rolling. With the increase in the amounts of deformation, the average grain size of the small grains increased first and then decreased, while the average grain size of the big grains decreased. Both the volume fraction of twins and the average grain size of the alloy decreased with the increasing amounts of deformation, resulting in the improvement of the tensile properties of the alloy. When the amount of deformation was 65%, the mechanical properties of the alloys were optimal; the tensile strength, yield strength, and elongation-to-failure were 288 MPa, 188 MPa, and 15.7%, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Salt Lake Chemical Engineering Research Complex, Qinghai Provincial Key Laboratory of New Light Alloys, Qinghai Provincial Engineering Research Center of High-Performance Light Metal Alloys and Forming, Qinghai University, Xining 810016, China
School of Chemical Engineering, Qinghai University, Xining 810016, China
Funding
Salt Lake Chemical Engineering Research Complex
References (29)
Show source-provided references
1. 10.1038/s41598-017-10384-010.1038/s41598-017-10384-0 ↗
2. 10.1038/s41467-018-04981-410.1038/s41467-018-04981-4 ↗
3. 10.1038/srep2995410.1038/srep29954 ↗
4. 10.1021/am201052710.1021/am2010527 ↗
5. 10.1126/science.aap871610.1126/science.aap8716 ↗
6. 10.1016/j.actamat.2018.03.00210.1016/j.actamat.2018.03.002 ↗
7. Joost WJ, Krajewski PE. Towards magnesium alloys for high-volume automotive applications [J]. Sci Rep 2017; 128: 107–112.
8. 10.1016/j.matdes.2015.09.15310.1016/j.matdes.2015.09.153 ↗
9. 10.1016/j.scriptamat.2009.06.00310.1016/j.scriptamat.2009.06.003 ↗
10. 10.1016/j.jmst.2019.06.00810.1016/j.jmst.2019.06.008 ↗
11. 10.1016/j.jallcom.2018.01.34410.1016/j.jallcom.2018.01.344 ↗
12. 10.1016/j.jallcom.2017.11.22010.1016/j.jallcom.2017.11.220 ↗
13. 10.1016/j.msea.2016.10.08410.1016/j.msea.2016.10.084 ↗
14. 10.1016/j.jma.2017.03.00110.1016/j.jma.2017.03.001 ↗
15. 10.1016/j.ijfatigue.2018.08.02510.1016/j.ijfatigue.2018.08.025 ↗
16. 10.1016/j.actamat.2017.05.03410.1016/j.actamat.2017.05.034 ↗
17. 10.1016/j.ijfatigue.2016.01.02610.1016/j.ijfatigue.2016.01.026 ↗
18. 10.1016/S1359-6454(01)00008-810.1016/S1359-6454(01)00008-8 ↗
19. 10.1016/j.msea.2009.11.04710.1016/j.msea.2009.11.047 ↗
20. 10.1007/s10853-024-09400-210.1007/s10853-024-09400-2 ↗
21. 10.1016/j.jallcom.2023.17212210.1016/j.jallcom.2023.172122 ↗
22. Wang X, Wang RN, Liu YM, et al. Preparation technology and study of microstructures and mechanical properties for large size TC2 Titanium alloy sheet by pack ply-rolling [J]. Hot Working Technology 2014; 43: 136–137.
23. Qu JH, Du JH, Deng Q, et al. Effect of compound jacketing rolling process on microstructure of difficult to deform superalloy GH720Li [J]. J Mater Sci Technol 2008; 16: 121–124.
24. Zeng M. The study of pack rolling process and heat treatment on powder metallurgy TiAl alloy [D]. Changsha, Hunan Province, China: Central South University, 2012.
25. 10.1016/j.msea.2013.07.01110.1016/j.msea.2013.07.011 ↗
26. 10.1016/j.msea.2019.13819710.1016/j.msea.2019.138197 ↗
27. He LP. Effect of Strong Deformation Rolling Process on Microstructure and Properties of Mg-6Sn-3Al-Zn Alloy [D]. Xining, Qinghai Province, China: Qinghai University, 2019.
28. 10.1016/j.jallcom.2019.07.09910.1016/j.jallcom.2019.07.099 ↗
29. 10.1016/j.msea.2011.11.00310.1016/j.msea.2011.11.003 ↗