journal article·2025-12-12

Enhanced milling performance and mechanical properties of B319/TiC composites via hot pressing

Ufuk Taşcı, Yafes Çavuş, Taha Alper Yılmaz, Halil Karakoç, Şener Karabulut

Publisher page

Abstract

This study investigates the mechanical and machinability properties of B319 aluminum alloy reinforced with titanium carbide (TiC). Composite specimens containing 5 wt% and 10 wt% TiC were fabricated using high-energy ball milling followed by hot pressing. The effects of TiC reinforcement on densification, microstructure, hardness, transverse rupture strength (TRS), and dry milling behavior were systematically evaluated. SEM/EDS analyses confirmed a uniform dispersion of TiC with strong interfacial bonding. The addition of 10 wt% TiC increased hardness by about 22% and TRS by approximately 10% compared to unreinforced B319, while fractography revealed a transition from ductile to brittle fracture with increasing reinforcement. Machining tests at cutting speeds of 100–300 m/min and feeds of 0.10–0.15 mm/rev showed that TiC addition improved surface finish (Ra < 0.8 µm at 300 m/min) but also increased tool wear (up to 0.84 mm), cutting forces (120–142 N), and specific cutting energy (about four times higher than unreinforced B319). Post-machining observations confirmed material transfer and oxidation at the tool–workpiece interface. Overall, the results indicated that TiC reinforcement enhances strength and surface quality but raises machining costs. In this context, the study contributes to the limited literature by providing an integrated assessment of process–structure–property–machinability relationships for B319/TiC composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced machining processes and optimization · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Gazi University

Hacettepe University

Funding

Gazi Üniversitesi

References (43)

Show source-provided references
1. 10.1177/002199831986530710.1177/0021998319865307 ↗
2. 10.1177/0021998324130216510.1177/00219983241302165 ↗
3. 10.1080/02670836.2022.206827210.1080/02670836.2022.2068272 ↗
4. 10.1080/02670836.2023.221147010.1080/02670836.2023.2211470 ↗
5. 10.1080/02670836.2022.204306210.1080/02670836.2022.2043062 ↗
6. 10.1080/02670836.2022.207893510.1080/02670836.2022.2078935 ↗
7. 10.3390/met1303060910.3390/met13030609 ↗
8. 10.1016/j.mtcomm.2021.10220210.1016/j.mtcomm.2021.102202 ↗
9. 10.1007/s13369-024-08865-210.1007/s13369-024-08865-2 ↗
10. Rajendran AR, Dhanaraj AP, Sadhasivam JK, et al. Optimization of process parameters of aluminium 7075/TiCnp MMC fabricated using powder metallurgy route†. Eng Proc 2024; 61: 2–5.
11. 10.1007/s12666-018-1447-010.1007/s12666-018-1447-0 ↗
12. 10.3390/cryst1302033510.3390/cryst13020335 ↗
13. 10.1016/j.enganabound.2023.04.03910.1016/j.enganabound.2023.04.039 ↗
14. Vini MH. Fabrication of Aluminum/Gr composites and investigation of its tribological and wear properties. Int J Adv Des Manuf Technol 2023; 16: 89–95.
15. 10.1016/j.wear.2023.20520110.1016/j.wear.2023.205201 ↗
16. 10.1177/0021998325136989510.1177/00219983251369895 ↗
17. 10.3390/ma1009109810.3390/ma10091098 ↗
18. Chu K Jia CC Li WS. On CTE of SPS consolidated SiCp/Al composites with various particle size distributions. Mater Sci Technol 2012; 28: 1397–1401 10.1179/1743284712Y.000000008910.1179/1743284712Y.0000000089 ↗
19. 10.1179/174328407X15436510.1179/174328407X154365 ↗
20. 10.1016/j.jmrt.2024.06.11010.1016/j.jmrt.2024.06.110 ↗
21. 10.1016/j.jmrt.2024.06.11910.1016/j.jmrt.2024.06.119 ↗
22. 10.3390/lubricants1306024710.3390/lubricants13060247 ↗
23. 10.3390/lubricants1206021510.3390/lubricants12060215 ↗
24. 10.1016/j.jcis.2019.10.07510.1016/j.jcis.2019.10.075 ↗
25. Abdo HS, Seikh AH, Fouly A, et al. Synergistic strengthening effect of reinforcing spark plasma sintered Al-Zn-TiC nanocomposites with TiC nanoparticles. Crystals (Basel) 2021; 11: 2–10.
26. 10.1016/j.msea.2022.14423510.1016/j.msea.2022.144235 ↗
27. 10.1016/j.triboint.2024.10933410.1016/j.triboint.2024.109334 ↗
28. 10.1016/j.pmatsci.2015.01.00210.1016/j.pmatsci.2015.01.002 ↗
29. 10.1016/j.jmrt.2020.04.03310.1016/j.jmrt.2020.04.033 ↗
30. 10.3390/app13231293910.3390/app132312939 ↗
31. Fu R Ren Y Zheng Y et al. Mechanical properties of a high manganese austenitic cryogenic steel. 2001.10.3901/JME.2001.03.078 ↗
32. 10.1016/j.jmrt.2024.06.22510.1016/j.jmrt.2024.06.225 ↗
33. 10.1016/j.ceramint.2021.12.02910.1016/j.ceramint.2021.12.029 ↗
34. 10.1016/j.jmst.2022.07.02910.1016/j.jmst.2022.07.029 ↗
35. 10.1016/j.jallcom.2024.17398310.1016/j.jallcom.2024.173983 ↗
36. 10.3390/ma1404101210.3390/ma14041012 ↗
37. 10.1016/j.msea.2022.14285510.1016/j.msea.2022.142855 ↗
38. 10.1007/s00170-023-11178-710.1007/s00170-023-11178-7 ↗
39. 10.1080/10426914.2024.242562810.1080/10426914.2024.2425628 ↗
40. 10.1007/s40684-023-00512-910.1007/s40684-023-00512-9 ↗
41. 10.1016/j.ijrmms.2022.10504810.1016/j.ijrmms.2022.105048 ↗
42. 10.1016/j.rineng.2022.10087310.1016/j.rineng.2022.100873 ↗
43. Abellán-Nebot JV, Vila Pastor C, Siller HR. A review of the factors influencing surface roughness in machining and their impact on sustainability. Sustain 2024; 16: 2–31.