Investigation of mechanical and tribological properties of MoS 2 -reinforced AZ91D nanocomposites
Source abstract
Abstract
Nanocomposites reinforced with MoS 2 offer strong potential for lightweight engineering applications, yet AZ91D magnesium alloy faces limitations in strength and wear resistance. This study overcomes these issues using an ultrasonication-assisted stir-squeeze casting method to improve wettability, densification, and uniform distribution of MoS 2 . AZ91D composites with 0.5, 1 and 1.5 wt.% MoS 2 were fabricated and examined through microstructural, XRD, density, porosity, mechanical and tribological tests. Results showed refined grains, uniform nanoparticle dispersion and mechanical properties improved significantly up to 1 wt.%. TOPSIS, ANOVA, and RSM optimisation showed that the 1 wt.% composite made the biggest significance (82%). The optimal conditions yielded major reductions in wear rate (61.7%) and COF (44%). Confirmation tests validated the predictions, establishing 1 wt.% MoS 2 as the optimal for enhanced performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Anna University
Department of Mechanical Engineering, College of Engineering Guindy, Anna University, Chennai, India
Department of Mechanical Engineering, Chandigarh College of Engineering and Technology (Degree Wing), Chandigarh, India
References (39)
Show source-provided references
1. 10.1039/C7TA08327K10.1039/C7TA08327K ↗
2. 10.1038/nchem.158910.1038/nchem.1589 ↗
3. 10.1016/j.bios.2019.03.00510.1016/j.bios.2019.03.005 ↗
4. 10.1016/j.inoche.2020.10820010.1016/j.inoche.2020.108200 ↗
5. 10.1007/s10311-020-01075-w10.1007/s10311-020-01075-w ↗
6. Elanjeitsenni VP, Jeyaraman PNK, Kulandhaivelu SV, et al. Effect of multiwall carbon nanotube reinforcement on the microstructural, mechanical, and wear properties of magnesium nanocomposites for lightweight aerospace and automotive components. J Mater Eng Perform 2025; 35: 1–24.
7. 10.1016/j.wear.2013.02.01610.1016/j.wear.2013.02.016 ↗
8. 10.1016/j.jmst.2023.12.03110.1016/j.jmst.2023.12.031 ↗
9. Banerjee S, et al. Tribological behavior of Mg–WC nanocomposites at elevated temperatures. Tribol Int 2019; 6: 1–8.
10. 10.1007/s11665-017-2563-410.1007/s11665-017-2563-4 ↗
11. 10.1016/j.triboint.2018.09.02810.1016/j.triboint.2018.09.028 ↗
12. 10.1016/j.ceramint.2020.03.26510.1016/j.ceramint.2020.03.265 ↗
13. 10.1016/j.materresbull.2018.11.02910.1016/j.materresbull.2018.11.029 ↗
14. 10.1016/j.jallcom.2018.03.06810.1016/j.jallcom.2018.03.068 ↗
15. 10.1007/s00170-023-12502-x10.1007/s00170-023-12502-x ↗
16. 10.1016/j.matpr.2022.07.05510.1016/j.matpr.2022.07.055 ↗
17. 10.1088/2631-8695/ad16a210.1088/2631-8695/ad16a2 ↗
18. 10.1016/j.jallcom.2023.17061310.1016/j.jallcom.2023.170613 ↗
19. 10.1007/s12046-023-02243-810.1007/s12046-023-02243-8 ↗
20. 10.3390/nano907095610.3390/nano9070956 ↗
21. Somasundaram N, Sivanantham G, Sivaraj Vijaya G, et al. Mechanical and tribological effects of MoS2 reinforcement in AZ91 alloy. Qeios 2024; 6: 1–7.
22. 10.1007/s12633-020-00523-010.1007/s12633-020-00523-0 ↗
23. 10.1021/acsomega.3c0508910.1021/acsomega.3c05089 ↗
24. Venkatrao S, Vinod B, Baburao P, et al. Mechanical and tribological behavior of Mg–4Zn–1RE–0.7Zr alloy reinforced with Si₃N₄/TiC/MoS2. Composites and Adv Mat 2024; 33: 1–19.
25. 10.1080/13640461.2025.247682610.1080/13640461.2025.2476826 ↗
26. 10.1016/j.matpr.2022.07.05510.1016/j.matpr.2022.07.055 ↗
27. 10.1039/C5DT04832J10.1039/C5DT04832J ↗
28. Karthikeyan M, et al. Enhanced tribological performance of electroless Ni–P coatings with MoS2–Gr solid lubricants. J Adhes Sci Technol 2025; 39(6): 1–24.
29. 10.1016/j.matpr.2020.12.20210.1016/j.matpr.2020.12.202 ↗
30. 10.1016/j.triboint.2022.10805410.1016/j.triboint.2022.108054 ↗
31. Ayyanar S, et al. Microstructure and tribological performance of ZrB2 reinforced AZ91D alloy under different processing routes. Proceedings of the IMechE 2023; 237(3).
32. 10.1039/C7TA08327K10.1039/C7TA08327K ↗
33. 10.1039/C5DT04832J10.1039/C5DT04832J ↗
34. 10.1016/j.jallcom.2018.03.06810.1016/j.jallcom.2018.03.068 ↗
35. 10.1016/j.materresbull.2018.11.02910.1016/j.materresbull.2018.11.029 ↗
36. 10.3390/met1009126510.3390/met10091265 ↗
37. Arslan M, Raju GU, Meti VKV, et al. Hybrid MWCNT–CF reinforced AZ91D composites. Materials (Basel) 2022; 15: 6181.
38. Ramadoss R, et al. Mechanical and wear behaviour of h-BN reinforced AZ91D composites. J Mater Res Technol 2024; 29: 1528–1540.
39. Sharma Aet al. Wear behaviour of AZ91 alloy reinforced with WS2. J Tribology / ASME / MDPI 2021; 143(11).