In situ observation on microstructural development of high-speed steel during carbon partitioning process
Source abstract
Abstract
Quenching–partitioning–tempering (Q–P–T) process was applied to treat high-speed steel. Microstructural development and properties were studied using high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy, X-ray diffraction and a drop hammer impact toughness tester. The results of impact toughness test showed that the impact absorption energy increased to 16.2–20.1 J along the Q–P–T process, namely 56–93% higher than that of traditional Q–T approach (10.4 J). The results of in situ HRTEM showed that the interface of martensite/austenite ( α/ γ) migrated from martensite towards austenite with the increase of holding time, which led to a reduction of retained austenite. One of the migration planes was (110) α /(111) γ . The cementite precipitation and slight decomposition of retained austenite were observed during carbon partitioning process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, People's Republic of China
School of Material Science & Engineering, Harbin Institute of Technology, Harbin, People's Republic of China
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, People's Republic of China
Funding
National High Technology Research and Development Program of China
References (34)
Show source-provided references
1. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
2. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
3. 10.1016/j.msea.2006.02.13310.1016/j.msea.2006.02.133 ↗
4. 10.1016/j.matdes.2016.12.06510.1016/j.matdes.2016.12.065 ↗
5. 10.1590/S1516-1439200500040001010.1590/S1516-14392005000400010 ↗
6. 10.1016/j.actamat.2017.05.04910.1016/j.actamat.2017.05.049 ↗
7. 10.1179/174951508X35840010.1179/174951508X358400 ↗
8. 10.1016/j.msea.2017.05.08710.1016/j.msea.2017.05.087 ↗
9. Hsu TY · J Alloy Compd · 2013 · 577 · S56810.1016/j.jallcom.2012.02.016 ↗
10. 10.1016/j.msea.2017.03.02010.1016/j.msea.2017.03.020 ↗
11. 10.1016/j.matdes.2013.10.09410.1016/j.matdes.2013.10.094 ↗
12. 10.1016/j.msea.2017.10.10510.1016/j.msea.2017.10.105 ↗
13. 10.1016/j.actamat.2014.11.04910.1016/j.actamat.2014.11.049 ↗
14. 10.1002/srin.20110031810.1002/srin.201100318 ↗
15. 10.1016/j.msea.2016.01.01110.1016/j.msea.2016.01.011 ↗
16. 10.1016/j.actamat.2014.05.05510.1016/j.actamat.2014.05.055 ↗
17. 10.1016/j.actamat.2011.06.01410.1016/j.actamat.2011.06.014 ↗
18. Zhong N · J Mater Sci and Technol · 2006 · 22 · 751
19. 10.1016/j.actamat.2013.10.06410.1016/j.actamat.2013.10.064 ↗
20. 10.1016/j.actamat.2016.01.05910.1016/j.actamat.2016.01.059 ↗
21. 10.1016/j.actamat.2016.04.04810.1016/j.actamat.2016.04.048 ↗
22. 10.1016/j.actamat.2017.08.00310.1016/j.actamat.2017.08.003 ↗
23. 10.1016/j.msea.2017.05.03010.1016/j.msea.2017.05.030 ↗
24. 10.1080/02670836.2015.113327110.1080/02670836.2015.1133271 ↗
25. 10.1016/j.matchar.2016.03.02510.1016/j.matchar.2016.03.025 ↗
26. 10.1016/j.msea.2016.05.00410.1016/j.msea.2016.05.004 ↗
27. 10.1016/j.msea.2015.05.05810.1016/j.msea.2015.05.058 ↗
28. 10.1016/j.msea.2012.08.06410.1016/j.msea.2012.08.064 ↗
29. 10.1016/j.scriptamat.2009.03.02110.1016/j.scriptamat.2009.03.021 ↗
30. 10.1016/j.actamat.2017.09.04810.1016/j.actamat.2017.09.048 ↗
31. 10.1007/b3780110.1007/b37801 ↗
32. 10.1080/0950083070119417310.1080/09500830701194173 ↗
33. 10.1016/j.scriptamat.2008.02.04510.1016/j.scriptamat.2008.02.045 ↗
34. 10.1007/s11661-008-9701-410.1007/s11661-008-9701-4 ↗