On the effect of nickel substitution in duplex stainless steel
Source abstract
Abstract
The present experimental and theoretical study investigates the effect of nickel on the phase balance and resulting properties of a 22Cr duplex stainless steel. The decrease in nickel was balanced by nitrogen and manganese additions. It was found that a minimum nickel content was required to maintain mechanical and corrosion properties at technically relevant levels. The influence of increasing nitrogen content on resulting phase composition and properties is discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Jargelius R. F. A., Blom R., Hertzman S., and Linder J.: Proc. Conf. on ‘Duplex stainless steels 91’, (ed.Charles J., and Bernhardsson S.), Vol. 1, 211-220; 1991, Beaune, Les editions de physique.
2. Bernhardsson S.: Proc. Conf. on ‘Duplex stainless steels 91’, (ed.Charles J., and Bernhardsson S.), Vol. 1, 185-210; 1991, Beaune, Les editions de physique.
3. Nordberg H.: Proc. Conf. on ‘Stainless steel 93’, Florence, Italy, October 1993, Associazione Italiana di Metallurgia,Vol. 2, 2.217-2.229.
4. 10.1007/s11661-997-0130-610.1007/s11661-997-0130-6 ↗
5. Olsson J., and Liljas M.: Proc. Int. Conf. on ‘Corrosion’, Baltimore, MD, USA, February—March 1994, NACE International, Paper 395.
6. Nana S. · J. SAIMM · 1993 · 93 · 307
7. Jarl M. · Scand J. Met · 1978 · 7 · 93
8. 10.1007/BF0264838210.1007/BF02648382 ↗
9. 10.1007/978-3-662-03760-710.1007/978-3-662-03760-7 ↗
10. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗
11. 10.1016/S1359-6462(98)00396-010.1016/S1359-6462(98)00396-0 ↗
12. Hutchinson W. B., Schlippenbach U. V., and Jonsson J.: Proc. Conf. on ‘Duplex stainless steels 86’, The Hague, The Netherlands, October 1986, Nederlands Instituut voor Lastechniek,326–330.
13. Nilsson A. S.: Anisotropi i Duplext Rostfritt SW SS 2377’, Report IM-2551, Swedish Institute for Metals Research, Stockholm, Sweden, 1990.
14. Lorentz K. · Thyssenforschung · 1969 · 1 · 97
15. Pettersson R. F. A., and Flyg J.: Proc. 13th Scandin. Corros. Cong., Reykjavik, Iceland, April 2004, Icelandic Building Research Institute, Paper 30.
16. 10.1016/0921-5093(94)09694-510.1016/0921-5093(94)09694-5 ↗
17. Speidel M. O. · Mater. Perform · 1992 · 31 · 59
18. 10.1002/maco.1995046110410.1002/maco.19950461104 ↗
19. 10.5006/1.328484010.5006/1.3284840 ↗
20. Pettersson R., Flyg J., and Welander C. ‘Factors affecting pitting and crevice corrosion in stainless steels’, Report IM-2003-501, Swedish Institute for Metals Research, Stockholm, Sweden, 2003.
21. Vannevik H., Nilsson J.O., Frodigh J., and Kangas P.: ISIJ Int. 1996, 36, 807–812.10.2355/isijinternational.36.807 ↗
22. 10.1016/j.msea.2005.09.03110.1016/j.msea.2005.09.031 ↗
23. Outokumpu Stainless Steel AB.
24. 10.1016/0956-716X(93)90300-H10.1016/0956-716X(93)90300-H ↗
25. 10.1179/mst.1992.8.8.68510.1179/mst.1992.8.8.685 ↗
26. Binder W. O. · Trans. ASM · 1951 · 43 · 759
27. Brandis H. · DECH. Monogr · 1974 · 76 · 235
28. Steigerwald R. F., Dundas H. J., Redmond J. D., and Davison R. M.: Proc. Int. Conf. on ‘Stainless steels 77’, (ed.Barr R. Q.), 57-72; 1977, London, Climax Molybdenum Company.
29. Jolley W. · J. Iron Steel Inst · 1968 · 206 · 170
30. Hodge J. M. · Trans. AIME · 1949 · 185 · 233
31. Jolley W. · Trans. Met. Soc. AIME · 1968 · 242 · 306
32. Gavriljuk V. G.: Proc. Int. Conf. on ‘High nitrogen steels (HNS 2006)’, (ed.Dong H. et al), 3-12; 2006, Beijing, Metallurgical Industry Press.
33. 10.1088/0953-8984/10/8/01510.1088/0953-8984/10/8/015 ↗
34. Gavriljuk V. G.: Personal comment to S. Hertzman.
35. Tetelman A. S., and McEvily A. J.Jr: ‘Fracture of structural materials’; 1967, New York, John Wiley & Sons Inc.
36. Pickering F. B.: Proc. Conf. on ‘Stainless steels ‘84’, Gothenburg, Sweden, September 1984, The Institute of Metals,2–28.
37. Johansson P. · ACOM (Sweden) · 2002 · 1 · 17
38. 10.1007/s11661-006-0179-710.1007/s11661-006-0179-7 ↗