Simulation and quantitative assessment of finitesize particle distributions in metal matrix composites
Source abstract
Abstract
A series of finitesize particle distributions were simulated to investigate the effects of particle size, shape, orientation, and area fraction on the quantification of homogeneity in structural particulate metal matrix composites (MMCs). It is found that, for nominally random distributions, the values of conventional centre-to-centre nearest-neighbour spacing parameters are influenced by particle morphology, and, as such, are unsuitable for characterising distributions of finite-size particles. However, the coefficient of variation of the mean near-neighbour distance COV( d mean ), derived from particle interfaces using finite-body tessellation, appears independent of particle shape, size distribution, orientation, and area fraction, while showing great sensitivity to particle clustering. In the range of particle morphological characteristics studied, the random distributions were found to exhibit a consistent value of COV( d mean ) equal to 0.36±0.02. The degree of inhomogeneity of any given distribution may then be evaluated by simply comparing the measured COV( d mean ) with this value.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Bauxite Residue and Utilization · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of SouthamptonSouthampton, SO17 1BJ, UK
References (31)
Show source-provided references
1. HUNT W. H.JR. RICHMON O. and YOUNG R. D.: in ‘Proceedings of the 6th international conference on composite materials’ (ed. F. L. Mathews etal.) Vol. 2 209-223;1987 London Elsevier.
2. OSMAN T. M. LEWANDOWSKI J. J. and HUNT W. H.JR.: in ‘Fabrication of particulate reinforced metal composites’ (ed. Masounave J. and Hamel F. G.) 209-216; 1990 Metals Park OH ASM International.
3. 10.1179/mst.1998.14.9-10.95910.1179/mst.1998.14.9-10.959 ↗
4. DAVIDSON D. L.: Metall Trans. 1991 22A 113.10.1007/BF03350953 ↗
5. VASUDEVAN A. K. RICHMOND O. ZOK F. and EMIBURY J. D.: Mater. Sci Eng. 1989 A107 63.10.1016/0921-5093(89)90375-4 ↗
6. LLOYD D. J.: Acta Metall. 1991 39 59.10.1016/0956-7151(91)90328-X ↗
7. LLOYD D. J.: in ‘Metal matrix composites: processing micro-structure and properties’ Proc. 12th Riso Int. Symp. on ‘Materials science’ (ed. Hansen N. et al.) 81-99; 1991 Rosklide Riso National Laboratory.
8. LEWANDOWSKI J. J., , LIU C., , and HUNT W. H.JR.: Mater. Sci Eng., 1989, A107, 241.
9. MANOHARAN M. and LEWANDOWSKI J. J.: Mater. Sci Eng. 1992 A150 179.10.1016/0921-5093(92)90110-M ↗
10. 10.1179/mst.1997.13.9.70910.1179/mst.1997.13.9.709 ↗
11. MUMMERY P. and DERBY B.: Mater. Sci Eng. 1991 A153 221.10.1016/0921-5093(91)90566-6 ↗
12. PRANGNELL P. B., , BARNES S. J., , ROBERTS S. M., , and WITHERS P. J., : Key Eng. Mater., 1997, 127-131, 937.
13. CHRISTMAN T. NEEDLEMAN A. and SURESH S.: Acta Metall. 1989 37 3029.10.1016/0001-6160(89)90339-8 ↗
14. GHOSH S. and MOORTHY S.: Acta Metall. 1998 46 965.10.1016/S1359-6454(97)00289-9 ↗
15. HUMPHREYS F. J.: in ‘Mechanical and physical behaviour of metallic and ceramic composites’ Proc. 9th Riso Int. Symp. on ‘Materials science’ (ed. Andersen S. I. et al.) 51-74; 1988 Rosklide Riso National Laboratory.
16. FLOM Y. and ARSENAULT R. J.: Acta Metall. 1989 37 2413.10.1016/0001-6160(89)90039-4 ↗
17. 10.1016/0266-3538(89)90095-X10.1016/0266-3538(89)90095-X ↗
18. VOORT G. F. VANDER: in ‘Micon 90: advances in video technology for microstructural control ASTM STP 1094’ (ed. G. F. Vander Voort) 242-267; 1990 Philadelphia PA ASTM.
19. 10.1179/mst.1995.11.3.22210.1179/mst.1995.11.3.222 ↗
20. 10.1111/j.1365-2818.1983.tb04170.x10.1111/j.1365-2818.1983.tb04170.x ↗
21. 10.1016/0026-0800(85)90045-X10.1016/0026-0800(85)90045-X ↗
22. SHEHATA M. T. and BOYD J. D.: ‘Measurement of spatial distribution of inclusions’ in ‘Inclusions and their influence on material behaviour’ 123-131; 1988 Materials Park OH ASM International.
23. 10.1088/0965-0393/1/3/00310.1088/0965-0393/1/3/003 ↗
24. 10.1016/0026-0800(83)90043-510.1016/0026-0800(83)90043-5 ↗
25. BOSELLI J., , PITCHER P. D., , GREGSON P. J., , and SINCLAIR I.: Ser. Mater., 1988, 38, 839.
26. 10.1046/j.1365-2818.1999.00483.x10.1046/j.1365-2818.1999.00483.x ↗
27. 10.1046/j.1365-2818.1996.93374.x10.1046/j.1365-2818.1996.93374.x ↗
28. LEWANDOWSKI J. J. LIU C. and III. Int W. H.JR: in ‘Processing and properties for powder metallurgy composites’ (ed. Kumar P. et al.) 117-137; 1988 Warrendale PA TMS.
29. 10.1016/0026-0800(72)90048-110.1016/0026-0800(72)90048-1 ↗
30. BURGER G.PhD thesis McMaster University Canada 1986.
31. 10.1179/imtlr.1974.19.1.7710.1179/imtlr.1974.19.1.77 ↗