journal article·1986-08

Influence of swaging on hydrogen charged tensile fracture of a 12 wt-%Cr steel

W. M. Garrison, J. M. Hyzak

Publisher page

Abstract

The 12 wt-%Cr secondary hardening steel considered in this work is being evaluated for use in the first wall of fusion reactors. As the service temperature can approach 500°C, the microstructure of greatest interest has been a quenched and tempered structure obtained by tempering at 750°C after air cooling from the austenitizing temperature of 1050°C. This structure is susceptible to grain boundary failure whether internal hydrogen has been introduced by cathodic charging or not. In the uncharged condition failure is ductile, but follows prior austenite grain boundaries. Hydrogen charging results in a severe loss of ductility, and tensile fractures which are 30% brittle intergranular. This susceptibility to grain boundary fracture has been attributed both to phosphorus segregation to these grain boundaries and to a nearly continuous array of grain boundary carbides. This tendency for grain boundary fracture can be eliminated and the embrittlement associated with the introduction of internal hydrogen greatly reduced by swaging and subsequently retempering the quenched, and tempered microstructure. The improved properties of the swaged and retempered conditions are attributed to the effects of swaging on the prior austenite grain boundary structure and the orientation of the grain boundaries with respect to the tensile axis. MST/376
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fusion materials and technologies · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. HYZAK J. M. and GARRISON W. M. Jr: in Terrific alloys for use in nuclear energy applications’ (ed. Davis J. W. and Michel D. J. ) 385; 1984 New York The Metallurgical Society of AIME.
2. GARRISON W. M. Jr T. A. LECHTENBERG and J. M. HYZAK: in Terrific alloys for nuclear energy applications’ (ed. Davis J. W. and Michel D. J. ) 379; 1984 New York The Metallurgical Society of AIME.
3. BRIANT C. L., and BANERJE S. K. Int. Met. Rev., 1978, 23. (4), 164.
4. OLEFJORD I., : Int. Met. Rev., 1978, 23, (4), 149.
5. UNDERWOOD E. E.: in ‘Quantitative microscopy’ (ed. DeHoff R. T. and Rhines F. N. ). 77–127; 1968 New York McGraw-Hill.
6. 10.1007/BF0267044310.1007/BF02670443 ↗
7. KOUTSKÝ J., and JEŽEK J.: J. Iron Steel Inst., 1965, 203, 707.
8. 10.1179/03071697780329206010.1179/030716977803292060 ↗
9. COTTRELL A. H.: ‘The mechanical properties of matter’ 322; 1964 New York Wiley.
10. HIPPSLEY C. A. and DRUCE S. G.: ‘Effects of aging on the ductile-fracture mechanism in a high-strength low-alloy steel (300M)’ Report AERE-R 10783 AERE Harwell.
11. 10.5006/0010-9312-28.9.33710.5006/0010-9312-28.9.337 ↗