journal article·2013-10

Influence of sulphur on the microstructure and properties of Ag–Cu–Zn brazing filler metal

Y. Chen, D. Yun, F. Sui, W. Long, G. Zhang, S. Liu

Materials Science and Technology· Volume 29· Issue 10
Publisher page

Abstract

The effect of sulphur on the microstructure and properties of Ag45–Cu30–Zn25 brazing filler metal was investigated. Under the given experimental conditions, the sulphuration products mainly consisted of CuS, ZnS, Ag2S, Cu2S and Ag3CuS2. These sulphides not only distributed on the surface but also diffused into the interior of the filler metal and cut apart the matrix thereby significantly damaging the tensile strength of the filler metal from 658 to 283 MPa. The corresponding fracture characterisation turned from ductile fracture to brittle fracture. The sulphides existed as solid particles, which hinder the spreading of the liquid filler metal and the spreading area dramatically decreased from 317⋅09 to 18⋅55 mm2, which indicates that the filler metal rarely wets the base metal.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical Processes and Thermodynamics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, P.R. China

State Key Laboratory of Advanced Brazing Filler Metals &Technology, Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou 450001, P.R. China

References (19)

Show source-provided references
1. 10.1016/j.matchar.2007.04.00210.1016/j.matchar.2007.04.002 ↗
2. 10.1016/j.matchar.2008.03.01410.1016/j.matchar.2008.03.014 ↗
3. 10.1016/j.jnucmat.2003.07.00410.1016/j.jnucmat.2003.07.004 ↗
4. 10.1016/j.matdes.2012.01.04510.1016/j.matdes.2012.01.045 ↗
5. 10.1016/j.msea.2010.01.06510.1016/j.msea.2010.01.065 ↗
6. 10.1007/s11661-005-0240-y10.1007/s11661-005-0240-y ↗
7. 10.1016/j.msea.2011.11.07410.1016/j.msea.2011.11.074 ↗
8. Schwartz MM: Brazing, 2003, ASM International, Materials Park.
9. 10.1016/S1875-5372(10)60087-210.1016/S1875-5372(10)60087-2 ↗
10. 10.1016/j.jallcom.2010.05.12910.1016/j.jallcom.2010.05.129 ↗
11. 10.1016/S1002-0721(08)60387-710.1016/S1002-0721(08)60387-7 ↗
12. Xue SB · China Weld. · 2001 · 10 · 157
13. Xue SB · Hanjie Xuebao · 1998 · 10 · 6
14. 10.1016/j.matdes.2012.11.02110.1016/j.matdes.2012.11.021 ↗
15. Test Method of Wettability for Brazing Filler Metals, China Standard Press; 2008.
16. Barin I: Thermochemical Data of Pure Substances, 1989, Germany, Weinhein, VCH.
17. 10.1071/CH992144110.1071/CH9921441 ↗
18. Trots DM · J. Phys.: Condens. Matter · 2008 · 20 · 1
19. 2008 · 3