journal article·2012-07

Effects of radial gap and penetration depth on vibration fatigue behaviour of 304L stainless steel piping with socket weld

J J Xiu, H Y Jing, Y D Han, L Zhao, L Y Xu

Materials Science and Technology· Volume 28· Issue 7
Publisher page

Abstract

Fatigue related failures of small bore piping caused by vibration of socket welds often occur at nuclear power plants. The purpose of the present study is to evaluate the integrity of the socket weld in nuclear piping under the condition of vibration testing. The specimens were bolted to the shaker table and shaken simultaneously near their resonant frequencies to produce the desired stress. The test results show that the failures at higher stress tend to originate at the toe, while that for the case of lower stress failures tends to occur at the root. The effects of penetration depth and radial gap were also investigated by finite element method. Results show that the higher penetration depth and radial gap can decline the stress distribution in the weld root, which is beneficial to fatigue life. Further, the desired radial gaps can significantly reduce the von Mises stresses, which decrease from 150·4 to 82·7 MPa with the width of radial gap from 0·1 to 0·4 mm.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China

Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300072, China

References (12)

Show source-provided references
1. 10.4028/www.scientific.net/KEM.270-273.172510.4028/www.scientific.net/KEM.270-273.1725 ↗
2. 10.1016/j.nucengdes.2006.06.00510.1016/j.nucengdes.2006.06.005 ↗
3. 10.1016/j.jlp.2008.08.00310.1016/j.jlp.2008.08.003 ↗
4. EPRI: ‘Vibration fatigue testing of socket welds’, TR-113890, EPRI, Palo Alto, CA, USA, 1999.
5. EPRI: ‘EPRI fatigue management handbook’, TR-104534, EPRI, Palo Alto, CA, USA, 1994.
6. OPDE Database: ‘OECD piping failure data exchange (OPDE) project’, 2002.
7. 10.1016/j.nucengdes.2008.01.00210.1016/j.nucengdes.2008.01.002 ↗
8. ASME: ‘Class 1 components’, ASME boiler and pressure vessel code Sec. III NB, 2001.
9. EPRI: ‘Vibration fatigue of small bore socket-welded’, TR-107455, EPRI, Palo Alto, CA, USA, 1997.
10. Higuchi M, et al. ‘Fatigue strength of socket welded pipe joints’, ASME PVP, 1995.
11. 10.1016/j.ijfatigue.2010.11.00810.1016/j.ijfatigue.2010.11.008 ↗
12. Cheng P.Y: ‘Influence of residual stress and heat affected zone on fatigue failure of weld piping joints’, North Carolina State University, Raleigh, NC, USA, 2009.