journal article·1998-12

Comparative study of fracture toughness of austempered ductile irons with upper and lower ausferrite microstructures

P. Prasad Rao, S. K. Putatunda

Materials Science and Technology· Volume 14· Issue 12
Publisher page

Abstract

A ductile iron was austempered at 302 and 385°C for various times to get lower and upper ausferrite microstructures respectively. The microstructures were characterised by optical microscopy and X-ray diffraction. Plane strain fracture toughness was determined under all heat treatment conditions. While the austempered ductile iron with lower ausferrite microstructure showed higher fracture toughness, the one with upper ausferrite microstructure exhibited higher tensile toughness and strain hardening coefficient. A model was developed relating fracture toughness to the yield strength (σy) volume fraction of retained austenite (Xy) and the carbon content of the retained austenite (Cy). Experimental results showed excellent agreement with the prediction of the model that is proportional to σy(XyCy)½.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. DODD J. · Mod. Cast · 1978 · 68 · 60
2. HARDING R. A. · Br. Foundryinan · 1986 · 79 · 489
3. GUNDALACH R. B. · Met. Prog · 1985 · 128 · 19
4. 10.1016/0043-1648(86)90125-010.1016/0043-1648(86)90125-0 ↗
5. SCHMIDT I. · S. Metallkd · 1987 · 78 · 871
6. 10.1016/1044-5803(93)90069-810.1016/1044-5803(93)90069-8 ↗
7. 10.1007/BF0035654610.1007/BF00356546 ↗
8. 10.1111/j.1460-2695.1995.tb00893.x10.1111/j.1460-2695.1995.tb00893.x ↗
9. GHAR K. ZIJM · Arch. Eisenhiittenwes · 1979 · 50 · 269
10. BARBEZAT G. · Sulzer Tech. Rev · 1986 · 2 · 32
11. 10.1179/mst.1992.8.3.26310.1179/mst.1992.8.3.263 ↗
12. 10.1007/BF0268271010.1007/BF02682710 ↗
13. 10.1520/JTE11401J10.1520/JTE11401J ↗
14. 10.1007/BF0172868910.1007/BF01728689 ↗
15. 10.1111/j.1460-2695.1989.tb00520.x10.1111/j.1460-2695.1989.tb00520.x ↗
16. 10.1007/BF0281483010.1007/BF02814830 ↗
17. B. D. CULLITY: ‘Elements of X-ray diffraction’, 411; 1974, Reading, MA, Addison-Wesley.
18. ROBERTS C. S. · Trans. AIME · 1953 · 197 · 203
19. G. E. DIETER: ‘Mechanical metallurgy’; 1986, New York, McGraw-Hill.
20. HOLLOMON T. H. · Trans. AIME · 1945 · 162 · 268
21. 10.1179/mst.1992.8.12.109510.1179/mst.1992.8.12.1095 ↗
22. 10.1007/BF0266531910.1007/BF02665319 ↗
23. A. S. TETELMAN and A. J. McEVILY: ‘Fracture of structural materials’, 1967, New York, Wiley.
24. WHITE C. H. · J. Iron Steel Inst · 1962 · 200 · 457
25. ROBERTS W. N. · Trans. AIME · 1964 · 230 · 373
26. 10.1007/BF0264833910.1007/BF02648339 ↗
27. 10.1007/BF0281727110.1007/BF02817271 ↗
28. 10.1016/0025-5416(87)90556-810.1016/0025-5416(87)90556-8 ↗
29. 10.2320/matertrans1989.36.62010.2320/matertrans1989.36.620 ↗
30. KELLY p. M. · J. Aust. Inst. Metals · 1971 · 16 · 104
31. 10.1007/BF0035619210.1007/BF00356192 ↗
32. D. PECKNER: ‘The strengthening of metals’; 1964, New York, Reinhold.
33. 10.1007/s11661-997-0208-110.1007/s11661-997-0208-1 ↗
34. ALI A. S. H. · Mater. Sci. Eng · 1994 · 10 · 35