journal article·2015-01

Steady and unsteady state peritectic solidification

M. A. P. Castanho, P. R. Goulart, C. Brito, J. E. Spinelli, N. Cheung, A. Garcia

Materials Science and Technology· Volume 31· Issue 1
Publisher page

Abstract

In the present study, Pb–Bi as a model of alloys from peritectic systems was directionally solidified under transient heat flow conditions, which is the class of heat flow encompassing the majority of industrial solidification processes. Some experiments were also carried out in a vertical tube furnace under cooling rates closer to equilibrium during solidification in order to broaden the range of solidification parameters. Thermal parameters such as the tip growth rate ( VL) and the cooling rate [Formula: see text] were experimentally determined and correlated with the primary (λ1) and secondary (λ2) dendrite arm spacings by experimental growth laws. It is shown that the proposed growth laws are able to encompass also the growth of dendritic branches during steady state growth from the melt.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Technological Research – IPT, 05508-901, São Paulo, SP, Brazil

Federal Institute of Education, Science and Technology of São Paulo – IFSP, 18202-000 Itapetininga, SP, Brazil

Department of Materials Engineering, University of Campinas, UNICAMP, PO box 6122, 13083 – 970 Campinas, SP, Brazil

Department of Materials Engineering, Federal University of São Carlos – UFSCar, 13565-905, São Carlos, SP, Brazil

References (49)

Show source-provided references
1. 10.1007/s11661-010-0289-010.1007/s11661-010-0289-0 ↗
2. 10.1179/1743284711Y.000000001310.1179/1743284711Y.0000000013 ↗
3. 10.1016/j.actamat.2012.01.03410.1016/j.actamat.2012.01.034 ↗
4. 10.1016/j.actamat.2008.08.05810.1016/j.actamat.2008.08.058 ↗
5. 10.1016/j.matlet.2011.03.03410.1016/j.matlet.2011.03.034 ↗
6. 10.1016/j.jcrysgro.2011.08.03410.1016/j.jcrysgro.2011.08.034 ↗
7. 10.1016/j.jallcom.2009.10.18410.1016/j.jallcom.2009.10.184 ↗
8. 10.1016/S1359-6454(99)00365-110.1016/S1359-6454(99)00365-1 ↗
9. 10.1016/j.jpcs.2012.05.01410.1016/j.jpcs.2012.05.014 ↗
10. 10.1016/j.jallcom.2008.06.06010.1016/j.jallcom.2008.06.060 ↗
11. 10.1016/S0022-0248(00)00946-510.1016/S0022-0248(00)00946-5 ↗
12. 10.1016/j.intermet.2004.07.01010.1016/j.intermet.2004.07.010 ↗
13. 10.1007/s11661-999-0227-110.1007/s11661-999-0227-1 ↗
14. 10.1016/S0022-0248(99)00760-510.1016/S0022-0248(99)00760-5 ↗
15. 10.1016/S1003-6326(11)61439-810.1016/S1003-6326(11)61439-8 ↗
16. 10.1016/S1359-6454(02)00440-810.1016/S1359-6454(02)00440-8 ↗
17. 10.1016/j.jallcom.2007.07.00910.1016/j.jallcom.2007.07.009 ↗
18. 10.1016/S1359-6462(96)00438-110.1016/S1359-6462(96)00438-1 ↗
19. 10.2355/isijinternational.53.181810.2355/isijinternational.53.1818 ↗
20. 10.1016/j.msea.2005.08.16910.1016/j.msea.2005.08.169 ↗
21. 10.1016/S1359-6462(00)00604-710.1016/S1359-6462(00)00604-7 ↗
22. 10.1016/0036-9748(74)90338-X10.1016/0036-9748(74)90338-X ↗
23. 10.1016/S1003-6326(11)60679-110.1016/S1003-6326(11)60679-1 ↗
24. 10.1016/j.jallcom.2010.04.05410.1016/j.jallcom.2010.04.054 ↗
25. 10.1016/j.jallcom.2009.05.00810.1016/j.jallcom.2009.05.008 ↗
26. 10.1007/s12598-011-0408-010.1007/s12598-011-0408-0 ↗
27. 10.1016/j.mseb.2013.11.01610.1016/j.mseb.2013.11.016 ↗
28. 10.1007/s11661-008-9542-110.1007/s11661-008-9542-1 ↗
29. 10.1007/s11664-012-2263-710.1007/s11664-012-2263-7 ↗
30. 10.1016/j.matchemphys.2011.11.03310.1016/j.matchemphys.2011.11.033 ↗
31. 10.1016/j.jallcom.2009.01.10510.1016/j.jallcom.2009.01.105 ↗
32. 10.1007/s10853-012-6450-y10.1007/s10853-012-6450-y ↗
33. 10.1080/09500839.2012.68596210.1080/09500839.2012.685962 ↗
34. 10.1080/14786435.2010.54577910.1080/14786435.2010.545779 ↗
35. 10.1016/j.matlet.2012.04.09510.1016/j.matlet.2012.04.095 ↗
36. 10.1016/j.matchemphys.2013.11.03010.1016/j.matchemphys.2013.11.030 ↗
37. Hunt JD: ‘Solidification and casting of metals’, Proceedings of the International Conference on Solidification and Casting of Metals, London, UK, 1979, The Metals Society, 3–9.
38. 10.1016/0001-6160(81)90082-110.1016/0001-6160(81)90082-1 ↗
39. 10.1007/BF0264468910.1007/BF02644689 ↗
40. 10.1007/s11663-997-0039-x10.1007/s11663-997-0039-x ↗
41. 10.1007/BF0264895010.1007/BF02648950 ↗
42. 10.1016/j.msea.2004.07.03210.1016/j.msea.2004.07.032 ↗
43. 10.1016/j.actamat.2013.07.02610.1016/j.actamat.2013.07.026 ↗
44. 10.1103/PhysRevLett.110.22610210.1103/PhysRevLett.110.226102 ↗
45. 10.1179/1743284711Y.000000003810.1179/1743284711Y.0000000038 ↗
46. 10.1179/1743284713Y.000000028210.1179/1743284713Y.0000000282 ↗
47. Karma A · Metall. Mater. Trans. A · 1996 · 29 · 145710.1007/s11661-998-0361-1 ↗
48. 10.1016/j.jallcom.2006.08.24610.1016/j.jallcom.2006.08.246 ↗
49. 10.1007/s11661-000-0096-010.1007/s11661-000-0096-0 ↗