journal article·2023-12

Effect of electrolyte composition and deposition voltage on the deposition rate of copper microcolumns jet electrodeposition

Peng Ye, Qibin Niu, Fuliang Wang

Publisher page

Abstract

Jet electrodeposition (Jet ECD) is widely recognized for its potential to achieve high deposition rates and adequate field fixation. Currently, the rapid deposition of microscale copper structures remains a significant challenge. In this study, we address this challenge by employing a custom-made microcapillary glass nozzle and optimizing key plating parameters, including H 2SO 4, CuSO 4, KCl concentration, and applied voltage. Through systematic experimentation, we successfully deposited well-formed copper microcolumns with a diameter of 70 μm at a deposition rate of 19.8 μm/s. We discovered that higher concentrations of H 2SO 4, greater voltage, and the addition of Cl - ions were effective in increasing the deposition speed. Furthermore, a higher concentration of CuSO 4 led to improved surface morphology. Additionally, we conducted COMSOL simulations to investigate the influence of voltage and conductivity on the deposition speed. Our research results contribute to the understanding and optimization of rapid fabrication processes for copper microstructures through jet electrodeposition at the microscale.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Nanomaterials and Printing Technologies · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Additive Manufacturing of Metal Structures at the Micrometer Scale10.1002/adma.201604211 ↗
2. Electrochemical 3D micro- and nanoprinting: Current state and future perspective10.1002/elsa.202100123 ↗
3. Mask-Less Electrochemical Additive Manufacturing: A Feasibility Study10.1115/1.4029022 ↗
4. Fabrication of Cu-Zn Alloy Micropillars by Potentiostatic Localized Electrochemical Deposition10.1149/2.0501908jes ↗
5. Selective copper metallization of nonconductive materials using jet-circulating electrodeposition10.1016/j.precisioneng.2017.08.005 ↗
6. Characterization of buffered electrolytes for nickel electrochemical printing10.1149/1.2825166 ↗
7. Meniscus-confined three-dimensional electrodeposition for direct writing of wire bonds10.1126/science.1190496 ↗
8. A.P. Suryavanshi, M.-F. Yu, Probe-based electrochemical fabrication of freestanding Cu nanowire array, Appl. Phys. Lett. 88(8) (2006). http://dx.doi.org/10.1063/1.2177538.10.1063/1.2177538 ↗
9. Write-Read 3D Patterning with a Dual-Channel Nanopipette10.1021/acsnano.6b04761 ↗
10. High-Speed Selective Electroplating with Single Circular Jets10.1149/1.2123560 ↗
11. High Schmidt mass transfer in a turbulent impinging slot–jet flow10.1016/S0017-9310(01)00042-4 ↗
12. Modelling of high speed selective jet electrodeposition process10.1016/j.jmapro.2014.07.012 ↗
13. High Speed Selective Jet Electrodeposition10.1080/00202967.1991.11870907 ↗
14. R.J. von Gutfeld, M.H. Gelchinski, L.T. Romankiw, D.R. Vigliotti, Laser-enhanced jet plating: A method of high-speed maskless patterning, Appl. Phys. Lett. 43(9) (1983) 876-878. http://dx.doi.org/10.1063/1.94534.10.1063/1.94534 ↗
15. Jet and Laser‐Jet Electrochemical Micromachining of Nickel and Steel10.1149/1.2097282 ↗
16. Fabrication of nano-sized grain micro features using ultrasonic-assisted jet electrodeposition with pulsed current supply10.1177/0954405413520142 ↗
17. Micromanufacturing by selective jet electrodeposition process
18. Compressed Air-Film Encircling Jet Electrodeposition with High Deposition Accuracy10.1149/1945-7111/ab971d ↗
19. Additive manufacturing of three-dimensional intricate microfeatures by electrolyte-column localized electrochemical deposition
20. Recent advances in three-dimensional microelectrode array technologies for in vitro and in vivo cardiac and neuronal interfaces10.1016/j.bios.2020.112687 ↗
21. Fabrication of micro-sized-copper column array through localized electrochemical deposition using 20-μm-diameter micro-anode10.1007/s10008-021-05095-6 ↗
22. Single step modification of copper electrode for the highly sensitive and selective non-enzymatic determination of glucose10.1007/s00604-010-0306-4 ↗
23. Enhanced heat transfer of heat sink channels with micro pin fin roughened walls10.1016/j.ijheatmasstransfer.2015.09.014 ↗
24. Chloride Ion Catalysis of the Copper Deposition Reaction10.1149/1.2044254 ↗
25. Copper ion reduction catalyzed by chloride ions10.1016/S0022-0728(02)01050-1 ↗
26. Kinetic selection of morphology and growth velocity in electrochemical deposition10.1103/PhysRevE.57.6955 ↗
27. Multiphysics Simulation of the Material Removal in Jet Electrochemical Machining10.1016/j.procir.2015.03.098 ↗
28. Study on the dynamic generation of the jet shape in Jet Electrochemical Machining10.1016/j.jmatprotec.2015.03.049 ↗