journal article·2006-07

Tensile failure of adhesively bonded CFRP composite scarf joints

S.B. Kumar, I. Sridhar, S. Sivashanker, S.O. Osiyemi, A. Bag

Materials Science and Engineering: B· Volume 132· Issue 1-2
Publisher page

Abstract

Abstract Adhesively bonded scarf joints, comprising unidirectional carbon fibre-reinforced epoxy adherends and AF-163-2 film adhesive of 0.15 mm thick, are tested under uniaxial tensile loading. Test results revealed that failure occurred into two modes, namely fibre fracture and pull-out (Mode A) and cohesive shear failure of the adhesive film (Mode B). Mode A failure was observed for scarf angles less than about 2°, while Mode B failure was observed for scarf angles more than 2°. The knockdown in tensile strength was most prominent for scarf angles less than about 1°. For the largest scarf angle of 5°, the tensile strength dropped by 89% in comparison to the strength values of neat composites with no joints. The knockdown in tensile strength with increasing scarf angle was well described by our FEM predictions, which modeled the unidirectional composite as a homogeneous orthotropic continuum with Hashin–Lee failure criterion. Finally, the effect of adhesive bond line thickness on the joint strength is investigated by finite element simulations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Mazumdar · 2002
2. Ahn · J. Compos. Mater. · 1998 · 32 · 103610.1177/002199839803201102 ↗
3. J.D. Labor, S.H. Myhre, Final Report AFFDL-TR-79-3040, Northrop Corporation, Aircraft Division, March 1979.
4. Myhre · 1985
5. Hamada · J. Reinf. Plast. Compos. · 1997 · 16 · 11910.1177/073168449701600202 ↗
6. Fuwa · J. Mater. Sci. · 1975 · 10 · 206210.1007/BF00557484 ↗
7. Qian · Acta Mater. · 1998 · 46 · 489510.1016/S1359-6454(98)00200-6 ↗
8. Lubkin · ASME Trans. (J. Appl. Mech.) · 1957 · 24 · 25510.1115/1.4011506 ↗
9. Objois · J. Adhes. Sci. Technol. · 2000 · 14 · 105710.1163/156856100743077 ↗
10. Objois · Trans. Can. Soc. Mech. Eng. · 2001 · 25 · 20910.1139/tcsme-2001-0012 ↗
11. Sasaki · For. Prod. J. · 1973 · 23 · 37
12. Liu · Int. J. Fract. · 1999 · 95 · 6710.1023/A:1018635914556 ↗
13. Brink · Acta Mater. · 1997 · 45 · 276510.1016/S1359-6454(96)00393-X ↗
14. Pradhan · Mech. Res. Commun. · 1993 · 20 · 15510.1016/0093-6413(93)90022-G ↗
15. Gleich · 2001
16. Gleich · J. Adhes. Sci. Technol. · 2000 · 14 · 87910.1163/156856100742942 ↗
17. Macander · J. Eng. Mater. Technol. Trans. ASME · 1978 · 100 · 6410.1115/1.3443452 ↗
18. Marcolefas · Int. J. Mech. Sci. · 1991 · 33 · 96110.1016/0020-7403(91)90052-5 ↗
19. Adkins · Compos. Sci. Technol. · 1985 · 22 · 20910.1016/0266-3538(85)90034-X ↗
20. D.W Adkins, R.B. Pipes, in: Proceedings of the Fourth Japan-U.S. Conference on Composite Materials, 27–29 June 1988, Washington, DC, USA, 1989, pp. 845–854.
21. Scotch Weld™, Manufacturer's Data Sheet for Structural Film Adhesive AF-163-2, 1999 3M Singapore.
22. Higgins · Int. J. Adhes. Adhes. · 2000 · 20 · 36710.1016/S0143-7496(00)00006-3 ↗
23. J.E. Robson, The Repair of Composite Materials, PhD Thesis, Imperial College of Science, Technology and Medicine, University of London, England, 1993.
24. ASTM D3039/D3039M, Standard Test Methods for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, 1995.
25. NASA Contractor Report No. N7413197, Mcdonnell–Douglas Corp., Long Beach, CA, January 1973.
26. Kumar · Materials Science and Engineering A · 2005 · 412 · 11710.1016/j.msea.2005.08.033 ↗
27. S.B. Kumar, S. Sivashanker, A. Bag, I. Sridhar, Mater. Sci. Eng. A, available online 28 September 2005.
28. Hashin · J. Appl. Mech. Trans. ASME · 1980 · 47 · 32910.1115/1.3153664 ↗
29. Lee · Compos. Struct. · 1982 · 15 · 33510.1016/0045-7949(82)90026-8 ↗