journal article·2021-01

Electro-thermal–mechanical performance of a sensor based on PAN carbon fibers and real-time detection of change under thermal and mechanical stimuli

Yumna Qureshi, Mostapha Tarfaoui, Khalid Lafdi

Publisher page

Abstract

Structural health monitoring (SHM) is a vastly growing field consisting of sensors embedded in or attached with the structure which respond to the strain or other stimuli to monitor the deformation in real-time. In this study, a carbon fiber (CF) sensor was developed using unidirectional Polyacrylonitrile (PAN) carbon filaments aligned straightly together and its sensitivity was calculated experimentally, with the gauge factor (GF) in 10.2–10.8 range. The electro-thermal behavior of this CF sensor showed distinct performance and detected the change in the surrounding temperature. There is a good reproducibility in the results in both piezoresistive and electro-thermal behavior of the CF sensor and its electrical performance showed real-time detection of both mechanical and thermal stimuli. The results established that the CF exhibited good potential as a flexible strain sensor for in-situ monitoring of damage or energy release during the failure of composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Structural Health Monitoring Techniques · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. C. Simon, E. Potter, M. McCabe, and C. Baggerman, “Smart fabrics technology development,” 2010. [Online]. Available: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20100042366.pdf.
2. Advances in composite materials-ecodesign and analysis
3. Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact10.1016/j.compositesb.2017.05.065 ↗
4. Energy dissipation of stitched and unstitched woven composite materials during dynamic compression test10.1016/j.compositesb.2019.03.023 ↗
5. Structural health monitoring techniques for aircraft composite structures10.1016/j.paerosci.2010.05.001 ↗
6. Determination of mode I & II strain energy release rates in composite foam core sandwiches: an experimental study of the composite foam core interfacial fracture resistance
7. In-situ heat dissipation monitoring in adhesively bonded composite joints under dynamic compression loading using SHPB10.1016/j.compositesb.2018.07.039 ↗
8. Development of microscale flexible nylon/Ag strain sensor wire for real-time monitoring and damage detection in composite structures subjected to three-point bend test10.1016/j.compscitech.2019.107693 ↗
9. Pitch-catch active sensing methods in structural health monitoring for aircraft structures10.1177/1475921707081979 ↗
10. Real-time strain monitoring performance of flexible Nylon/Ag conductive fiber10.1016/j.sna.2019.06.036 ↗
11. Real-time strain monitoring and damage detection of composites in different directions of the applied load using a microscale flexible Nylon/Ag strain sensor10.1177/1475921719869986 ↗
12. In-situ monitoring, identification and quantification of strain deformation in composites under cyclic flexural loading using nylon/Ag fiber sensor10.1109/JSEN.2020.2969329 ↗
13. Monitoring a delamination in a laminated composite beam using in-situ measurements and parametric identification10.1016/j.jsv.2006.07.026 ↗
14. Piezoelectric wafer embedded active sensors for aging aircraft structural health monitoring10.1177/147592170200100104 ↗
15. An integrated health monitoring technique using structural impedance sensors10.1106/QXMV-R3GC-VXXG-W3AQ ↗
16. Structural health monitoring for a wind turbine system: a review of damage detection methods10.1088/0957-0233/19/12/122001 ↗
17. Health monitoring aircraft10.1177/1045389X9000100307 ↗
18. An introduction to structural health monitoring10.1098/rsta.2006.1928 ↗
19. Structural health monitoring of smart composite materials by using EFPI and FBG sensors10.1016/S0924-4247(02)00429-6 ↗
20. Staszewski · 2004
21. Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures — a review10.1006/jsvi.1999.2624 ↗
22. Review of guided-wave structural health monitoring10.1177/0583102406075428 ↗
23. S. W. Doebling, C. R. Farrar, M. B. Prime, and D. W. Shevitz, Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review, doi: 10.2172/249299.10.2172/249299 ↗
24. Lamb wave propagation in varying isothermal environments10.1177/1475921708090564 ↗
25. Damage detection in CFRP by electrical conductivity mapping10.1016/S0266-3538(00)00178-0 ↗
26. Messtechnische Eigenschaften von Dehnungssensoren aus Kohlenstoff-Filamentgarn in einem VerbundwerkstoffMeasuring Performance of Carbon Filament Yarn Strain Sensors Embedded in a Composite
27. Health monitoring of marine composite structural joints using fibre optic sensors10.1016/j.compstruct.2006.04.054 ↗
28. Health monitoring in continuous glass fibre reinforced thermoplastics: Tailored sensitivity and cyclic loading of CNT-based interphase sensors10.1016/j.compscitech.2010.08.003 ↗
29. Application of carbon filament (CF) for structural health monitoring of textile reinforced thermoplastic composites10.1179/175355511X13007211258881 ↗
30. Health monitoring in continuous glass fibre reinforced thermoplastics: Manufacturing and application of interphase sensors based on carbon nanotubes10.1016/j.compscitech.2010.05.018 ↗
31. Carbon nanotube coated glass fibres for interphase health monitoring in textile composites10.1179/175355511X13007211259042 ↗
32. Reinforcing carbon fibers as sensors: The effect of temperature and humidity10.1016/j.compositesa.2020.105819 ↗
33. Stretchable energy-harvesting tactile electronic skin capable of differentiating multiple mechanical stimuli modes10.1002/adma.201402574 ↗
34. Carbon nanotubes grown on glass fiber as a strain sensor for real time structural health monitoring10.1080/19475411.2011.651509 ↗
35. Highly sensitive and multimodal all-carbon skin sensors capable of simultaneously detecting tactile and biological stimuli10.1002/adma.201501408 ↗
36. A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres10.1038/nmat3380 ↗
37. Direct measurement of the axial poisson's ratio of single carbon fibres10.1016/0266-3538(91)90049-U ↗
38. Study of piezoresistance effect in carbon fibers10.1016/S0008-6223(97)00120-6 ↗
39. Electrical properties of single carbon fibres10.1088/0022-3727/3/11/309 ↗
40. A. Horoschenkoff, T. Mueller, and A. Kroell, “On the characterization of the piezoresistivity of embedded carbon fibres,” ICCM 17th, 2009.
41. A. Horoschenkoff, M. Derks, T. Mueller, H. Rapp, and S. Schwarz, “Konzeptstudie zum einsatz von elektrisch kontaktierten carbonfasern als sensor für leichtbaustrukturen aus faserverbundwerkstoff Vorträge. 14,” in Nationales Symp. Sampe Deutschland eV (Garching, 7--28 February), 2008.
42. Electrical resistance of single carbon fibres10.1038/2231146b0 ↗
43. Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement10.1016/j.compositesb.2010.08.005 ↗
44. Self-sensing of position-related loads in continuous carbon fibers-embedded 3D-printed polymer structures using electrical resistance measurement10.3390/s18040994 ↗
45. Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring10.1016/j.matdes.2016.10.078 ↗
46. Integrated self-monitoring of carbon based textile reinforced concrete beams under repeated loading in the un-cracked region10.1016/j.carbon.2015.10.056 ↗
47. Experimental investigation of self-sensing carbon fiber reinforced cementitious composite for strain measurement of an RC portal frame10.1155/2015/531069 ↗
48. Piezoresistivity of unidirectional carbon/epoxy composites for multiaxial loading10.1016/j.compscitech.2009.03.023 ↗
49. The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain10.1016/j.compositesa.2004.03.020 ↗
50. Electromechanical modeling of unidirectional CFRP composites under tensile loading condition10.1016/S1359-835X(01)00097-5 ↗
51. “Strain Gauge Measurement – A Tutorial,” 1998. [Online]. Available: http://elektron.pol.lublin.pl/elekp/ap_notes/NI_AN078_Strain_Gauge_Meas.pdf.
52. Characteristics of carbon fiber based strain sensors for structural-health monitoring of textile-reinforced thermoplastic composites depending on the textile technological integration process10.1016/j.sna.2013.08.045 ↗
53. Detection of damage in cylindrical parts of carbon fiber/epoxy composites using electrical resistance (ER) measurements10.1016/j.compositesb.2016.06.050 ↗
54. Interfacial evaluation of carbon fiber/epoxy composites using electrical resistance measurements at room and a cryogenic temperature10.1016/j.compositesa.2015.02.007 ↗
55. Electro-thermal damage of carbon fiber/epoxy composite laminate10.1177/0731684417738334 ↗
56. Prediction of effective through-thickness thermal conductivity of woven fabric reinforced composites with embedded particles10.1016/j.compstruct.2015.03.015 ↗