Effect of beryllium on the stabilization of Mg-3Ca alloy foams
Source abstract
Abstract
The present work is the first ever study where the influence of beryllium (Be) addition on the stability of Mg alloy foam was investigated. Mg-3Ca alloy foams were produced by the liquid processing route with and without Be micro-addition. CaCO 3 was used as a blowing agent. Mg-3Ca alloy foam without Be resulted in stable foam but exhibited low expansion with poor foam structure. Be addition significantly increased foam expansion and improved their structure. The expansion and the structure of the Mg foams obtained are comparable with that of commercially available aluminum foams. The XPS analysis confirmed the presence of BeO at the gas–solid interface of Mg foam. Be stabilizes the gas–solid interface of the foam by forming a smooth and crack-free surface of BeO layer which prevents the continuous oxidation of liquid foam and also minimizes the loss of blowing gas thereby enhancing the stability of Mg-3Ca alloy foams.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
2. Soft Liquid Metal Infused Conductive Sponges10.1002/admt.202101500 ↗
3. Catalytic Metal Foam by Chemical Melting and Sintering of Liquid Metal Nanoparticles10.1002/adfm.201907879 ↗
4. Bi–Sn Catalytic Foam Governed by Nanometallurgy of Liquid Metals10.1021/acs.nanolett.0c01170 ↗
5. Mg alloy foam fabrication via melt foaming method
6. Study on fabrication and foaming mechanism of Mg foam using CaCO3 as blowing agent10.1016/j.jallcom.2007.07.098 ↗
7. Fabrication and characterization of closed-cell magnesium-based composite foams10.1016/j.matdes.2015.02.029 ↗
8. Effects of porosity and pore size on the compressive properties of closed-cell Mg alloy foam10.1016/j.jma.2013.11.006 ↗
9. Suppression of ignition and burning of molten Mg alloys by Ca bearing stable oxide film10.1023/A:1018526708423 ↗
10. Kinetic study on the surface oxidation of the molten Mg-9Al-0.5Zn-0.3Be alloy10.1023/A:1017990301208 ↗
11. Magnesium and Magnesium Alloy Foams
12. Combustion of magnesium alloys in air10.1016/j.matchemphys.2004.01.036 ↗
13. Effect of be addition on the oxidation behavior of mg-ca alloys at elevated temperature10.1007/BF03027357 ↗
14. Effect of CaO on oxidation resistance and microstructure of pure Mg10.2320/matertrans.MC200786 ↗
15. Flame-Resistant Magnesium Alloys by Calcium
16. Precipitation hardening of Mg-Ca(-Zn) alloys10.1016/S1359-6462(97)00294-7 ↗
17. Oxide films on magnesium and magnesium alloys10.1016/j.matchemphys.2007.04.010 ↗
18. Oxidation of magnesium alloys at elevated temperatures in air: A review10.1016/j.corsci.2016.06.018 ↗
19. Compressive properties of cellular Mg foams fabricated by melt-foaming method10.1016/j.msea.2010.05.017 ↗
20. Rheological Characteristics of Mg-Al Alloys with Ceramic Particles for Meta Foam10.4028/www.scientific.net/MSF.510-511.742 ↗
21. Foaming Mg Alloy and Composite Using MgCO3 Blowing Agent10.1007/s11663-021-02066-0 ↗
22. ALPORAS Aluminum Foam: Production Process, Properties, and Applications10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G ↗
23. The FOAMCARP process: Foaming of aluminium MMCs by the chalk-aluminium reaction in precursors10.1016/S0266-3538(03)00263-X ↗
24. Porous Metal and Metallic Foams
25. Ashby · 2000
26. Collapse of aluminum foam in two different atmospheres10.1007/s11663-010-9357-5 ↗
27. Stabilisation of aluminium foams and films by the joint action of dispersed particles and oxide films10.1016/j.actamat.2015.07.064 ↗
28. X-ray photoelectron spectroscopy investigation of magnetron sputtered Mg-Ti-H thin films10.1016/j.ijhydene.2013.05.142 ↗
29. Influence of gaseous environments on beryllium–tungsten and tungsten surfaces investigated by XPS
30. An investigation progress toward Be-based ablator materials for the inertial confinement fusion10.1017/hpl.2017.8 ↗
31. Combustion of mixtures of Magnesium with carbonates of alkaline earth elements10.1007/BF00745075 ↗
32. On oxidative activity of water vapor, CO2 and CO in respect to magnesium and aluminium powders (in Russian)
33. Ignition and burning of magnesium particles in caseous oxides of carbon10.1007/BF00742263 ↗
34. Combustion of Magnesium Particles in CO2/CO Mixtures10.1080/00102209208951843 ↗
35. Behavior of surface oxidation on molten Mg-9Al-0.5Zn-0.3Be alloy10.1016/S0921-5093(00)01798-6 ↗
36. Influence of Cu, Zn and Si alloying elements on Al alloy foams produced using Mg blowing agent10.1007/s10853-020-05381-0 ↗
37. Defect generation during solidification of aluminium foams10.1016/j.scriptamat.2010.03.064 ↗