Fabrication and evaluation of 3D bio-scaffold wound dressings for monitoring of chronic pH wounds using fuzzy logic analysis
Source abstract
Abstract
Different types of wounds, such as surgical wounds, first-degree burns, and graft sites are among acute wounds. However, chronic wounds are the ones that have a gradual onset, and the healing process is stopped in terms of factors, such as poor blood flow, local pressure, diabetes and other factors. In this study, a novel wound dress made of carboxymethyl chitosan was composed of titanium nanoparticles (TiNP) using the freeze-drying technique. The wound dress contained pH-sensitive mini-emulsion, in which time and temperature are controlled, and adjusted by pH sensors. A heater was connected to the wound temperature sensor and, as the wound temperature drops below the specified range, it automatically turned on and raised the temperature to the maximum range. The mechanical strength, and biological behavior of tissue were evaluated to find an optimized sample. The prepared wound tissue was characterized using a scanning electron microscope (SEM) and the biodegradation rate was evaluated using weight change analysis. The obtained results show that the stress-strain diagram sample containing polyvinyl alcohol (PVA) had the lowest amount and the sample with TiNP had the highest strength. The results indicate that TiNP has the highest mechanical strength compared to other samples due to its inherent antibacterial properties. Moreover, fuzzy logic modeling was used to find a linguistic model for obtained experimental data. After developing the model, the results found by the model were compared to the experimental outputs. The results show that the developed method was efficient which can be used to predict the output of given data before performing any test practically.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wound Healing and Treatments · Electrospun Nanofibers in Biomedical Applications · Antimicrobial agents and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Quercetin functionalized hybrid electrospun nanofibers for wound dressing application10.1016/j.mseb.2022.115933 ↗
2. Smart carriers and nanohealers: a nanomedical insight on natural polymers10.3390/ma10080929 ↗
3. Integrated use of nickel cobalt aluminoferrite/Ni2+ nano-crystallites supported with SiO2 for optomagnetic and biomedical applications10.1016/j.mseb.2021.115491 ↗
4. Coaxial electrospinning of PVA/Nigella seed oil nanofibers: Processing and morphological characterization10.1016/j.mseb.2020.115012 ↗
5. Characterization of TiO2–Al2O3 composite fibers formed by electrospinning a sol–gel and polymer mixture10.1016/j.mseb.2010.01.027 ↗
6. Electrospun poly (NVCL-co-AA) fibers as potential thermo-and pH-sensitive agents for controlled release of hydrophobic drugs10.1016/j.mseb.2021.115531 ↗
7. Smart polycationic hydrogel dressing for dynamic wound healing10.1002/smll.202201620 ↗
8. Antibacterial activity of zinc oxide-coated nanoporous alumina10.1016/j.mseb.2012.04.024 ↗
9. Advances in polysaccharide-based nano/microcapsules for biomedical applications: A review10.1016/j.ijbiomac.2022.08.129 ↗
10. Superabsorbent polymers: A review on the characteristics and applications of synthetic, polysaccharide-based, semi-synthetic and ‘smart’derivatives10.1016/j.eurpolymj.2019.04.054 ↗
11. B. Gupta, R. Agarwal, M.S. Alam, Textile-based smart wound dressings (2010).
12. C. Dwivedi, H. Pandey, A. C Pandey, P. W Ramteke Nanofibre based smart pharmaceutical scaffolds for wound repair and regenerations. Current pharmaceutical design, 22(11) (2016) 1460-1471.10.2174/1381612822666151215103553 ↗
13. Advanced therapies in wound management: cell and tissue based therapies, physical and bio-physical therapies smart and IT based technologies10.12968/jowc.2018.27.Sup6a.S1 ↗
14. 2018
15. Biological evaluations of a smart shape memory fabric10.1177/0040517509101789 ↗
16. Smart electrospun nanofibers for controlled drug release: recent advances and new perspectives10.2174/1381612821666150302151959 ↗
17. Choosing a wound dressing based on common wound characteristics10.1089/wound.2014.0586 ↗
18. Electrospun PCL membranes incorporated with biosynthesized silver nanoparticles as antibacterial wound dressings10.1007/s13204-015-0439-1 ↗
19. Wound healing and antimicrobial effect of active secondary metabolites in chitosan-based wound dressings: A review10.1016/j.carbpol.2020.115839 ↗
20. Green and sustainable encapsulation of Guava leaf extracts (Psidium guajava L.) into alginate/starch microcapsules for multifunctional finish over cotton gauze10.1021/acssuschemeng.9b04952 ↗
21. The response and tolerability of a novel cold atmospheric plasma wound dressing for the healing of split skin graft donor sites: A controlled pilot study10.1159/000517524 ↗
22. R. Wolcott, R. N. Fischenich, Ultimate standardization of first-line wound dressings to a single type. Today’s Wound Clinic, (2014) April, 22-24.
23. So, what do I put on this wound? Making sense of the wound dressing puzzle: part II
24. Effect of semipermeable membranes on skin barrier repair following tape stripping10.1007/PL00007463 ↗
25. Emerging innovative wound dressings10.1007/s10439-018-02186-w ↗
26. J. Boateng, O. Catanzano, Silver and silver nanoparticle‐based antimicrobial dressings. Therapeutic dressings and wound healing applications, (2020) 157-184.10.1002/9781119433316.ch8 ↗
27. S. Tavakoli, A.S. Klar, Advanced hydrogels as wound dressings. Biomolecules, 10(8) (2020) 1169.10.3390/biom10081169 ↗
28. Shape memory polymers for smart textile applications
29. M. Georgescu, M. C Chifiriuc, L. Marutescu, I. Gheorghe, V. Lazar, A. Bolocan, S. Bertesteanu, Bioactive wound dressings for the management of chronic wounds. Curr. Org. Chem. 21(1) (2017) 53-63.10.2174/1385272820666160510171040 ↗
30. An overview on application of natural substances incorporated with electrospun nanofibrous scaffolds to development of innovative wound dressings10.2174/1389557517666170308112147 ↗
31. G. Păunica-Panea, A. Ficai, M.M. Marin, Ș. Marin, M.G. Albu, V.D. Constantin, ... &M. V. Ghica,. New collagen-dextran-zinc oxide composites for wound dressing. Journal of Nanomaterials, (2016) 2016.10.1155/2016/5805034 ↗
32. Wound healing materials–a perspective for skin tissue engineering10.18520/cs/v112/i12/2392-2404 ↗
33. Biochemical and biophysical cues in matrix design for chronic and diabetic wound treatment10.1089/ten.teb.2016.0200 ↗
34. Continuous pH monitoring in wounds using a composite indicator dressing—A feasibility study10.1016/j.burns.2019.02.021 ↗
35. Tailoring biocompatibility of composite scaffolds of collagen/guar gum with metal–organic frameworks10.1039/D1RA08824F ↗
36. Hydrogel dressings for advanced wound management10.2174/0929867324666170920161246 ↗
37. Microwaved bacterial cellulose-based hydrogel microparticles for the healing of partial thickness burn wounds10.1007/s13346-016-0341-8 ↗
38. A. Rees, L.C. Powell, G. Chinga-Carrasco, D.T. Gethin, K. Syverud, K.E. Hill, D.W. Thomas, 3D bioprinting of carboxymethylated-periodate oxidized nanocellulose constructs for wound dressing applications, BioMed Res. Int. (2015).10.1155/2015/925757 ↗
39. Electrospun nanofibers: New generation materials for advanced applications10.1016/j.mseb.2017.01.001 ↗
40. A fuzzy logic model and a neuro-fuzzy system development on supercritical CO2 regeneration of Ni/Al2O3 catalysts10.1016/j.jcou.2021.101706 ↗
41. M. Ghasemi, M.G. Nejad, N. Alsaadi, M.T. Abdel-Jaber, A. Yajid, M. Shukri, M. Habib, (2022) Performance measurment and lead-time reduction in epc project-based organizations: a mathematical modeling approach. Mathematical Problems in Engineering, 2022.10.1155/2022/5767356 ↗
42. Recent Advances in Silver Nanoparticles Containing Nanofibers for Chronic Wound Management10.3390/polym14193994 ↗
43. Time minimization in flexible robotic cells considering intermediate input buffers: a comparative study of three well-known problems10.1080/0951192X.2019.1636411 ↗
44. Emergency response time minimization by incorporating ground and aerial transportation
45. Local search based meta-heuristic algorithms for optimizing the cyclic flexible manufacturing cell problem
46. Mobile robot scheduling for cycle time optimization in flow-shop cells, a case study10.1007/s11740-017-0784-x ↗
47. An Effective Grouping Evolution Strategy Algorithm Enhanced with Heuristic Methods for Assembly Line Balancing Problem10.1142/S0219686719500264 ↗
48. Optimizing the first type of U-shaped assembly line balancing problems
49. S. Mosallaeipour, R. Nazerian, M. Ghadirinejad, A Two-Phase Optimization Approach for Reducing the Size of the Cutting Problem in the Box-Production Industry: A Case Study, in Industrial Engineering in the Industry 4.0 Era. 2018, Springer. p. 63-81.10.1007/978-3-319-71225-3_6 ↗
50. M. Golabi, M.G. Nejad, Intelligent and Fuzzy UAV Transportation Applications in Aviation 4.0, in Intelligent and Fuzzy Techniques in Aviation 4.0. 2022, Springer. p. 431-458.10.1007/978-3-030-75067-1_19 ↗
51. A review on polymeric hydrogel membranes for wound dressing applications: PVA-based hydrogel dressings10.1016/j.jare.2017.01.005 ↗
52. Smart wound dressings for wound healing10.1016/j.nantod.2021.101290 ↗
53. Polymer-based smart drug delivery systems for skin application and demonstration of stimuli-responsiveness10.3390/polym13081285 ↗
54. Wound healing: From passive to smart dressings10.1002/adhm.202100477 ↗
55. Alginate fibres modified with unhydrolysed and hydrolysed chitosans for wound dressings10.1016/j.carbpol.2003.08.004 ↗
56. Application of stimulus-sensitive polymers in wound healing formulation10.1080/00914037.2019.1655744 ↗
57. Fresh, mechanical and microstructural properties of alkali-activated composites incorporating nanomaterials: A comprehensive review10.1016/j.jclepro.2022.135390 ↗
58. Y. Yang, S.Q. Wang, H. Wen, T. Ye, J. Chen, C.P. Li,...M. Du, Nanoporous Gold Embedded ZIF Composite for Enhanced Electrochemical Nitrogen Fixation. Angewandte Chemie (International ed.), 58(43) (2019) 15362-15366.10.1002/anie.201909770 ↗
59. X. Zhang, X. Sun, T. Lv, L. Weng, M. Chi, J. Shi,...S. Zhang, Preparation of PI porous fiber membrane for recovering oil-paper insulation structure, J. Mater. Sci.. Mater. Electron. 31(16) (2020) 13344-13351.10.1007/s10854-020-03888-5 ↗
60. Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy10.1016/j.vacuum.2022.111532 ↗
61. Effect of heat input on interfacial characterization of the butter joint of hot-rolling CP-Ti/Q235 bimetallic sheets by Laser + CMT10.1038/s41598-021-89343-9 ↗
62. Z. Zhang, J. Chen, J. Wang, Y. Han, Z. Yu, Q. Wang,... S. Yang, Effects of solder thickness on interface behavior and nanoindentation characteristics in Cu/Sn/Cu microbumps. Welding in the World, 66(5) (2022) 973-983.10.1007/s40194-022-01261-0 ↗
63. X. Fan, G. Wei, X. Lin, X. Wang, Z. Si, X. Zhang,... W. Zhao, Reversible Switching of Interlayer Exchange Coupling through Atomically Thin VO2 via Electronic State Modulation. Matter, 2(6) (2020) 1582-1593.10.1016/j.matt.2020.04.001 ↗
64. Finely tuning electrolytes and photoanodes in aqueous solar cells by experimental design10.1016/j.solener.2018.02.009 ↗
65. Lignin-based polymer electrolyte membranes for sustainable aqueous dye-sensitized solar cells10.1021/acssuschemeng.1c01882 ↗
66. Light cured networks containing metal organic frameworks as efficient and durable polymer electrolytes for dye-sensitized solar cells10.1039/c3ta12135f ↗
67. Dispelling clichés at the nanoscale: the true effect of polymer electrolytes on the performance of dye-sensitized solar cells10.1039/C5NR02286J ↗
68. Toward totally flexible dye-sensitized solar cells based on titanium grids and polymeric electrolyte10.1109/JPHOTOV.2016.2514702 ↗
69. Polymer electrolytes for dye-sensitized solar cells prepared by photopolymerization of PEG-based oligomers10.1016/j.ijhydene.2013.06.110 ↗
70. A UV-prepared linear polymer electrolyte membrane for dye-sensitized solar cells10.1016/j.physb.2014.05.053 ↗
71. Electrodes/electrolyte interfaces in the presence of a surface-modified photopolymer electrolyte: application in dye-sensitized solar cells10.1002/cphc.201402891 ↗
72. UV-cured self-healing gel polymer electrolyte toward safer room temperature lithium metal batteries10.1016/j.electacta.2022.141265 ↗