Functionalization of glass fiber woven fabrics by indium tin oxide (ITO) coatings for electromagnetic wave absorption
Source abstract
Abstract
The effects of surface electrical conductivity and cascading order of ITO surface modified glass fiber woven fabrics (GFWF) on the electromagnetic (EM) behavior of hybrid type multilayered absorber structure were investigated. Additional objective was to create a design guideline for a multilayered absorbing structure according to the needs of specific EM wave absorber applications. For this purpose, indium tin oxide (ITO) sols were deposited on GFWFs by spray pyrolysis technique. The electrical conductivity of these conducting layers was controlled to incorporate EM wave absorbing characteristics to glass fabrics. Surface modified fabrics were then used as reinforcement in a hybrid type multilayered EM wave absorbing structure which is a combination of Jaumann and graded type absorbers effective in 8–12 GHz frequency range (X-band). The highest absorption performance design has been formed by cascading six ITO coated fabrics with gradually increasing electrical conductivity gradient from the front to back layer of the structure. The electromagnetic behavior of the multilayered absorber was tested both with and without metallic backing. The absorber design showed ∼−11 dB reflection loss and ∼−9 dB transmission loss corresponding to ∼80 % average absorption without metallic backing, while its reflection loss and average absorption values were ∼−10.5 dB and ∼93 %, respectively, with metallic backing. The front layer of the multilayered structure with the lowest surface electrical conductivity provided impedance matching between air and receiving surface of the structure minimizing reflection, where the gradual increase in surface conductivity of the layers towards the back provided balanced internal reflection and transmission leading to high overall EM wave absorption. Consequently, by controlling the grading of the surface conductivity of the layers through the thickness, responses of the absorbers can be adjusted to provide tailored characteristics for the required EM wave absorption levels.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. S. Geetha, K.K.S. Kumar, C.R.K. Rao, M. Vijayan, D.C. Trivedi, EMI shielding: methods and materials — a review, 112(1) (2009) 2073–2086, doi: 10.1002/app.10.1002/app.29812 ↗
2. Development of the composite RAS (radar absorbing structure) for the X-band frequency range10.1016/j.compstruct.2005.07.021 ↗
3. C.F. Del Pozo, Electromagnetic fields, Encyclop. Toxicol. (2005) 155–158, doi: 10.1016/B0-12-369400-0/10049-3.10.1016/B0-12-369400-0/10049-3 ↗
4. Crystallization behavior of poly(ε-caprolactone)/layered double hydroxide nanocomposites10.1002/app.31787 ↗
5. P. Saville, Review of Radar Absorbing Materials Defence R & D Canada – Atlantic, Defence Research and Development Canada, no. January, 2005, p. 62.
6. S. Thomas, Advanced Materials for Electromagnetic Shielding, 2018, doi: 10.1002/9781119128625.10.1002/9781119128625 ↗
7. D.C.T.F.S. Geetha, K.K. Satheesh Kumar, C.R.K. Rao, M. Vijayan, EMI shielding: methods and materials—a review, J. Appl. Polym. Sci. 116 (2010), doi: 10.1002/app.29812.10.1002/app.29812 ↗
8. P. Steffan, J. Stehlik, R. Vrba, Composite materials for electromagnetic interference shielding, IFIP Int. Feder. Inf. Process. 245 (2007) 649–652, doi: 10.1007/978-0-387-74159-8_65.10.1007/978-0-387-74159-8_65 ↗
9. W.W. Salisbury, Absorbent Body for Electromagnetic Waves, US Patent No. 2599944 A, 1952.
10. The design of Jauman absorbers10.1109/74.370526 ↗
11. E.F. Knott, J.F. Shaeffer, M.T. Tuley, Radar Cross Section, second edition, 2004.10.1049/SBRA026E ↗
12. Lightweight Ni foam-based ultra-broadband electromagnetic wave absorber10.1002/adfm.202103436 ↗
13. M. Zhu, C. Xiong, Q. Lee, Research on ITO transparent electromagnetic shielding coatings for E-O system, in: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, Vol. 6722, 2007, p. 67223Y, doi: 10.1117/12.783569.10.1117/12.783569 ↗
14. Optical and electrical properties of transparent conductive ITO thin films deposited by sol-gel process10.1016/S0040-6090(00)01369-9 ↗
15. Synthesis of indium tin oxide nanorods by a facile process with ethylene glycol as solvent10.1016/j.mseb.2010.07.005 ↗
16. Transparent and conducting ITO films: new developments and applications10.1016/S0040-6090(02)00163-3 ↗
17. Exploration of twin-modified grain boundary engineering in metallic copper predominated electromagnetic wave absorber10.1002/smll.202203620 ↗
18. Hydro/Organo/ionogels: “controllable” electromagnetic wave absorbers10.1002/adma.202205376 ↗
19. Construction of porous carbon-based magnetic composites derived from iron zinc bimetallic metal-organic framework as broadband and high-efficiency electromagnetic wave absorbers10.1016/j.jcis.2022.11.078 ↗
20. Construction of three-dimensional hierarchical porous nitrogen-doped reduced graphene oxide/hollow cobalt ferrite composite aerogels toward highly efficient electromagnetic wave absorption10.1016/j.jmst.2022.05.050 ↗
21. Electromagnetic wave absorbing properties of high-permittivity ferroelectrics coated with ITO thin films of 377 ω10.1023/A:1025691621778 ↗
22. Optically transparent protective coating for ITO-coated PET-based microwave metamaterial absorbers10.1109/TCPMT.2020.2972911 ↗
23. Optically transparent metasurface Salisbury screen with wideband microwave absorption10.1364/OE.26.034384 ↗
24. Compact multi-functional frequency-selective absorber based on customizable impedance films10.1364/OE.422071 ↗
25. All 3-D printed free-space setup for microwave dielectric characterization of materials10.1109/TIM.2018.2805962 ↗
26. D. Tošić, I. Potrebić, Software Tools for Research and Education, Microwave review, 2022.
27. Preparation and sintering of nanocrystalline ITO powders with different SnO2 content10.1016/j.jeurceramsoc.2004.10.009 ↗
28. The effect of annealing treatment on microstructure and properties of indium tin oxides films10.1016/j.mseb.2006.01.012 ↗
29. Characterization of indium tin oxide (ITO) thin films prepared by a sol-gel spin coating process10.1016/j.ceramint.2010.09.033 ↗
30. Sol-gel formation of ITO thin film from a sol including ITO powder10.1023/A:1018305301123 ↗
31. Sol-gel-prepared ITO films for electrochromic systems10.1016/S0040-6090(96)09060-8 ↗
32. Preparation of ITO thin films by sol-gel process and their characterizations10.1016/j.synthmet.2005.07.219 ↗
33. Preparation of ITO transparent conductive film by sol-gel method10.1016/S1003-6326(07)60020-X ↗
34. Dip coated ITO thin-films through sol-gel process using metal salts10.1016/S0040-6090(01)00825-2 ↗
35. Electromagnetic wave absorption and compressive behavior of a three-dimensional metamaterial absorber based on 3D printed honeycomb
36. J. Zhou, J. Yu, D. Bai, H. Liu, L. Li, Mechanically robust flexible multilayer aramid nanofibers and MXene film for high-performance electromagnetic interference shielding and thermal insulation, 2021.10.3390/nano11113041 ↗