journal article·2002-09

Intermetallic compounds formation at interface between PBGA solder ball and Au/Ni/Cu/BT PCB substrate after laser reflow processes

Yanhong Tian, Chunqing Wang, Xiushan Ge, Peter Liu, Deming Liu

Publisher page

Abstract

This paper presents intermetallic compound formation at the interface between the Sn/Pb solder and the PBGA metallization (Au/Ni/Cu) substrate during a first laser reflow followed by a second infrared reflow processes. A thin layer of AuSn4 was observed at the interface of solder joints, its morphology was strongly dependent on the laser reflow power and heating time applied. The AuSn4 compound formed at the solder joint in the first laser reflow process also changed after the secondary infrared reflow process. To elucidate intermetallic formation mechanism at the interface, a finite element modeling (FEM) model is proposed, the simulated temperature profiles within the solder ball and at the solder-paid interface during laser heating are presented. In addition, the shear strength of the solder joints was tested, the correlation between the shear strength and their corresponding interfacial microstructure on the solder joints are also discussed. # 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Adhesion, Friction, and Surface Interactions · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Lau · 1995
2. James · 1991 · 1598 · 164
3. Hartmann · 1991 · 1598 · 175
4. Lee · J. Electron. Mater. · 2000 · 29 · 115310.1007/s11664-000-0006-7 ↗
5. Lee · Scripta Mater. · 2000 · 42 · 78910.1016/S1359-6462(99)00431-5 ↗
6. A. Zribi, R.R. Chromik, R. Presthus, J. Clum, K. Teed, L. Zavalij, J. Devita, J. Tova, E.J. Cotts, Proceedings of the 49th Electronic Components and Technology Conference, 1–4 June 1999, San Diego, CA, USA, IEEE, Piscataway, 1999, pp. 451–457.
7. Ferguson · IEEE Trans. Comp. Manufact. Technol. C · 1997 · 20 · 18810.1109/3476.649439 ↗
8. Minor · J. Electron. Mater. · 2000 · 29 · 117010.1007/s11664-000-0009-4 ↗
9. Minor · Metall. Mater. Trans. A · 2000 · 31 · 79810.1007/s11661-000-0022-5 ↗
10. Ho · J. Electron. Mater. · 2000 · 29 · 117510.1007/s11664-000-0010-y ↗
11. Zeng · J. Electron. Mater. · 2001 · 20 · 3510.1007/s11664-001-0212-y ↗
12. Kim · Mater. Chem. Phys. · 1998 · 53 · 16510.1016/S0254-0584(97)02076-2 ↗
13. Kim · J. Appl. Phys. · 1996 · 80 · 382210.1063/1.363336 ↗
14. Z. Mei, P. Callery, D. Fisher, F. Hua, J. Glazer, Proceedings of the 48th Electronic Components and Technology Conference, 25–28 May 1998, Seattle Washington, USA, IEEE, Piscataway, 1998, pp. 952–961.
15. Z. Mei, Kaufmann, A. Eslambolchi, P. Johnson, Proceedings of the Pacific Rim/ASME International Intersociety Electronic and Photonic Packaging Conference, vol. 2, Advances in Electronic Packaging 1997, ASME, New York, USA, 1997, pp. 1543–1550.
16. Ho · IEEE Trans. Adv. Packaging · 2001 · 24 · 49310.1109/6040.982835 ↗
17. Incropera · 1990
18. Bader · Welding J. Res. Suppl. · 1969 · 48 · 551s
19. Ho · J. Electron. Mater. · 1999 · 28 · 123110.1007/s11664-999-0162-3 ↗
20. Harrison · 1976 · 45