journal article·2020-01

Deformation mechanism of Zr–Sn–Nb–Fe cladding tube under various stress states

Jianghua Li, Yun Cui, Hao Wu, Gang Chen

Publisher page

Abstract

Abstract The deformation mechanism in hexagonal closely-packed materials is highly dependent on the relationship between the texture and stress state. In this study, the deformation mechanisms of cladding tubes composed of Zr–Sn–Nb–Fe, which has a hexagonal closely-packed structure, are investigated at 298 K under axial tension, axial compression, and hoop tension. Analysis of the Schmid factors and microstructural characteristics revealed that prismatic slip is the predominant deformation under axial tension, accompanied by a few pyramidal slips and {10–11} twins. In addition, prismatic slips and {10–12} twins are activated by axial compression. Furthermore, the change of the loading direction from axial tension to compression caused a transition from prismatic-slip predominant deformation to a {10–12} twin and prismatic-slip predominant mechanism. Moreover, prismatic and pyramidal slips were found to be activated by hoop stress. These findings provide insights to gain a better understanding of the plastic deformation mechanisms of cladding tubes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Design and mechanical characterization of a Zr–Nb–O–P alloy10.1016/j.matdes.2011.04.015 ↗
2. Oxidation of plasma surface modified zirconium alloy in pressurized high temperature water10.1016/j.matdes.2006.01.019 ↗
3. Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures10.1016/j.matdes.2015.06.088 ↗
4. Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr10.1016/j.actamat.2015.01.037 ↗
5. <-1-123> {1011} slip in zirconium10.1080/01418619108213938 ↗
6. A study of twinning in zirconium using neutron diffraction and polycrystalline modeling10.1007/s11661-002-0142-1 ↗
7. Quantitative analysis of deformation twinning in zirconium10.1016/j.ijplas.2008.03.010 ↗
8. Effects of texture, temperature and strain on the deformation modes of zirconium10.1080/14786430600684500 ↗
9. Mechanical response of zirconium—I. Derivation of a polycrystal constitutive law and finite element analysis10.1016/S1359-6454(01)00190-2 ↗
10. Texture and mechanical behavior of zircaloy-2 rolled at different temperatures10.1007/s11665-014-1315-y ↗
11. Deformation twinning in polycrystalline Zr: insights from electron backscattered diffraction characterization10.1007/s11661-002-0165-7 ↗
12. Effect of loading direction on the deformation and annealing behavior of a zirconium alloy10.1016/j.msea.2018.08.013 ↗
13. Influence of microstructure modification on the circumferential creep of Zr–Nb–Sn–Fe cladding tubes10.1016/j.jnucmat.2015.11.029 ↗
14. Creep properties of annealed Zr–Nb–O and stress-relieved Zr–Nb–Sn–Fe cladding tubes and their performance comparison10.1016/j.jnucmat.2010.07.023 ↗
15. In situ X-ray observation and simulation of ratcheting-fatigue interactions in solder joints10.1007/s13391-017-6018-8 ↗
16. Compressive mechanical behavior of Al/Mg composite rods with different types of Al sleeve10.1016/j.actamat.2016.08.079 ↗
17. Modeling lattice strain evolution during uniaxial deformation of textured Zircaloy-210.1016/j.actamat.2008.04.019 ↗
18. Residual stresses in annealed zircaloy10.1016/0001-6160(89)90025-4 ↗
19. Residual stress fields analysis in rolled Zircaloy-4 plates: grazing incidence diffraction and elastoplastic self-consistent model10.1016/j.actamat.2014.02.031 ↗
20. Examination of residual stresses and texture in zirconium alloy cladding tubes after a large plastic deformation: experimental and numerical study10.1016/j.jnucmat.2007.07.017 ↗
21. Role of twinning in the hardening response of zirconium during temperature reloads10.1016/j.actamat.2006.02.036 ↗
22. A new annealing hardening mechanism in pre-twinned Mg–3Al–1Zn alloy10.1016/j.msea.2015.12.046 ↗
23. ⟨a⟩ Prismatic, ⟨a⟩ basal, and ⟨c+a⟩ slip strengths of commercially pure Zr by micro-cantilever tests10.1016/j.actamat.2015.06.020 ↗
24. Modeling texture evolution during uni-axial deformation of Zircaloy-210.1016/j.jnucmat.2009.07.006 ↗
25. Effect of grain size on slip activity in pure magnesium polycrystals10.1016/j.actamat.2014.10.001 ↗
26. Super-formable pure magnesium at room temperature10.1038/s41467-017-01330-9 ↗