Characterizations on the microstructure and micro-mechanics of cast Be-Al-0.4Sc-0.4Zr alloy prepared by vacuum induction melting
Source abstract
Abstract
Abstract The cast Be-Al-0.4Sc-0.4Zr alloy is attractive for potential applications in numerous fields owing to the advantageous performance closely related to its microstructure and mechanical properties. This work investigates the microstructure and micro-mechanical properties of this alloy using various characterizing methods. In addition to the pronounced microstructure modifications, it was determined that both the scandium (Sc) and zirconium (Zr) preferentially formed intermetallic compounds with Be in the melt, and the majority of secondary phases existed in the Al matrix rather than the Be matrix. The calculated disregistry of lattice spacing, all greater than 15%, for the Al3Sc/Be and Be13Sc/Be couples indicated the secondary phase particles (SPs) did not act as effective nucleation sites for the Be. The calculated Gibbs energy and thermal analysis results both revealed, for the first time, that the Be13Sc formed spontaneously in the melt below the temperature of 1350 °C. Micro-mechanics including the reduced modulus and micro-hardness of the dispersed SPs (approximately 300 GPa and 16 GPa), the Be (approximately 320 GPa and 5.2 GPa) and Al (approximately 166 GPa and 0.6 GPa) matrices were determined by nano-indentation. The pop-in events at the depth near 10 nm on the load–depth curves for the SPs and the Be phase were attributed to the surface oxide layer, whereas those near 30 nm were due to their intrinsic properties. The true micro-hardness of the SPs and the Be phase were determined to be 4.68 GPa and 15.46 GPa via material pile-up corrections. The mechanism embodied by the homogeneous dislocation nucleation and propagation for the SPs was facilely concluded with the critical shear stress of 6.0 GPa and dislocation loop radius of 2.7 nm obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Evaluation of the tensile and fatigue behaviour of ingot metallurgy beryllium/aluminium alloys10.1023/A:1018677102160 ↗
2. Alloying of aluminum-beryllium alloys10.1134/S0036029513010096 ↗
3. Sc and Sc-Zr effects on microstructure and mechanical properties of Be-Al alloy10.1080/02670836.2017.1407555 ↗
4. Effects of scandium addition on microstructure, mechanical and thermal properties of cast Be-Al alloy10.1016/j.jallcom.2017.12.117 ↗
5. Microstructure and mechanical properties of Be-Al and Be-Al-Sc alloys with various solidification rates10.1088/2053-1591/aac80b ↗
6. Combined alloying of aluminum alloys with scandium and zirconium10.1007/s11041-014-9746-5 ↗
7. Coarsening resistance at 400℃ of precipitation-strengthened Al-Zr-Sc-Er alloys10.1016/j.actamat.2011.07.057 ↗
8. Impact of beryllium additions on thermal and mechanical properties of conventionally solidified and melt-spun Al-4.5 wt.%Mn-x wt.%Be (x=0, 1, 3, 5) alloys10.1016/j.matdes.2013.03.024 ↗
9. Walsh · 2009
10. Characterisation of oxide and hydroxide layers on technical aluminum materials using XPS10.1016/j.vacuum.2011.04.004 ↗
11. The electron spectra of beryllium and beryllium oxide: an XPS, X-AES and AES study10.1002/sia.5377 ↗
12. Photoemission investigation of the Schottky barrier at the Sc/3C-SiC (111) interface10.1002/pssb.201451340 ↗
13. Oxidation of scandium by oxygen and water studied by XPS10.1016/0039-6028(79)90690-3 ↗
14. Two-phase quasi-equilibrium in β-type Ti-based bulk metallic glass composites
15. Scandium in aluminium alloys10.1179/174328005X14311 ↗
16. XPS, AES and ToF-SIMS investigation of surface films and the role of inclusions on pitting corrosion in austenitic stainless steels10.1002/1096-9918(200007)29:7<460::AID-SIA889>3.0.CO;2-T ↗
17. Applications of secondary ion mass spectrometry (SIMS) in materials science10.1007/s10853-006-6568-x ↗
18. The Al-Sc (aluminum-scandium) system10.1361/105497198770342120 ↗
19. Be-Sc (Beryllium-Scandium)10.1007/s11669-008-9362-4 ↗
20. The Al-Be (aluminum-beryllium) system
21. Model predictions for the enthalpy of formation of transition metal alloys10.1016/0364-5916(77)90011-6 ↗
22. Proposed model for calculating the standard formation enthalpy of binary transition-metal systems10.1063/1.1499510 ↗
23. Predicting the formation enthalpies of binary intermetallic compounds10.1016/j.cplett.2007.06.031 ↗
24. Experimental study and thermodynamic modeling of the Al-Sc-Zr system10.1016/j.commatsci.2017.02.029 ↗
25. The scandium effect in multicomponent alloys10.1080/09506608.2015.1137692 ↗
26. Thermal expansion of Al3Sc and Al3(Sc0.75X0.25)10.1016/S1359-6462(02)00428-1 ↗
27. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron10.1007/BF02642799 ↗
28. Physics and chemistry of beryllium10.1116/1.573431 ↗
29. Quantification of hydrothermal degradation in zirconia by nanoindentation10.1016/j.actamat.2008.04.050 ↗
30. Johnson · 1985
31. Pop-in effects and dislocation nucleation of c-plane single-crystal ZnO by Berkovich nanoindentation10.1016/j.jallcom.2015.04.203 ↗
32. Effects of non-metallic inclusions on machinability of free-cutting steels investigated by nano-indentation measurements10.1007/s11661-014-2596-3 ↗
33. Nano-indentation of polymeric surfaces10.1088/0022-3727/31/19/006 ↗
34. Time-dependent characteristics of incipient plasticity in nanoindentation of a Ni3Al single crystal10.1016/S1359-6454(02)00025-3 ↗
35. A comparison of nanoindentation pile-up in bulkmaterials and thin films10.1016/j.tsf.2014.06.060 ↗
36. Microstructuralandmicro-mechanicalpropertiesofMo-Si-B alloyed with Y and La10.1016/j.msea.2013.02.053 ↗
37. Deformation behavior of Ni3Al single crystals during nanoindentation10.1016/S1359-6454(03)00436-1 ↗
38. Mechanical deformation of single-crystal ZnO10.1063/1.1448175 ↗
39. Discrete and continuous deformation during nanoindentation of thin films10.1016/S1359-6454(00)00009-4 ↗
40. Deformation behavior and mechanical properties of polycrystalline and single crystal alumina during nanoindentation10.1016/j.scriptamat.2011.03.022 ↗
41. Effect of crystal orientation on incipient plasticity during nanoindentation of magnesium10.1016/j.actamat.2017.07.052 ↗