journal article·2018-03

Modeling dynamic recrystallization during hot deformation of a cast-homogenized Mg-Zn-Zr alloy

A. Hadadzadeh, F. Mokdad, M.A. Wells, D.L. Chen

Publisher page

Abstract

Abstract Hot deformation of a cast-homogenized ZK60 magnesium alloy was studied in terms of dynamic recrystallization (DRX) kinetics. The alloy was isothermally compressed under uniaxial loading at 400 °C and 450 °C with varying strain rates of 0.001, 0.01 and 0.1 s−1. The DRX fraction of each deformation condition was determined via electron backscatter diffraction (EBSD) analysis. DRX kinetics during hot deformation was investigated using an Avrami-DRX equation. For the sake of comparison, Avrami-SRX (static recrystallization) modeling was also employed. Both models were calibrated and validated for hot deformation of the alloy. It was observed that the Avrami-DRX model could be successfully used to predict the DRX kinetics except for the lowest DRX fraction (i.e., deformation at 400 °C/0.1 s−1). Moreover, the Avrami-SRX model was in good agreement with the Avrami-DRX model for deformation at the lowest strain rate (i.e., 0.001 s−1). With increasing strain rate, Avrami-SRX model became increasingly less viable. This was mainly attributed to the smaller than 50% recrystallized fractions at 0.01–0.1 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Magnesium: current and potential automotive applications10.1007/BF02701073 ↗
2. Magnesium casting technology for structural applications10.1016/j.jma.2013.02.002 ↗
3. Kainer · 2003 · 3
4. Low cycle fatigue and mechanical properties of magnesium alloy Mg–6Zn–1Y–0.6Ce–0.6Zr at different temperatures10.1016/j.matdes.2014.03.001 ↗
5. Effect of extension {1012} twins on texture evolution at elevated temperature deformation accompanied by dynamic recrystallization10.1016/j.matdes.2016.02.042 ↗
6. An investigation to the hot deformation characteristics of AZ31 alloy through continuous cooling compression testing method10.1016/j.matdes.2011.10.050 ↗
7. Dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
8. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
9. Dynamic microstructural evolution in Mge4Zne2Ale2Sn alloy during hot deformation10.1016/j.msea.2016.01.086 ↗
10. Modeling of flow stress for magnesium alloy during hot deformation10.1016/j.msea.2010.01.035 ↗
11. On the recrystallization behavior of homogenized AZ81 magnesium alloy: the effect of mechanical twins and γ precipitates10.1016/j.msea.2012.07.054 ↗
12. Hot deformation and dynamic recrystallization behaviors of Mg–Gd–Y–Zr alloy10.1016/j.msea.2015.01.041 ↗
13. Dynamic recrystallization behaviors and the resultant mechanical properties of a Mg–Y–Nd–Zr alloy during hot compression after aging10.1016/j.msea.2015.05.076 ↗
14. Microstructural evolution and mechanical properties of a Mg-Gd-Y alloy processed by impact forging10.1016/j.msea.2017.07.009 ↗
15. Microstructure, texture and mechanical properties of friction stir processed Mg-14Gd alloys10.1016/j.matdes.2017.05.046 ↗
16. Impact toughness and fractography in Mg-Y alloy10.1016/j.matdes.2017.03.034 ↗
17. Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy10.1016/j.jmst.2017.04.004 ↗
18. Effect of forging on microstructure, texture, and uniaxial properties of cast AZ31B alloy10.1007/s11665-017-2743-2 ↗
19. Monotonic and cyclic behaviour of cast and cast-forged AZ80 Mg10.1016/j.ijfatigue.2017.06.038 ↗
20. Fabrication of ZK60 magnesium alloy thin sheets with improved ductility by cold rolling and annealing treatment10.1016/j.matdes.2012.04.009 ↗
21. Promotion of texture weakening in magnesium by alloying and thermomechanical processing. II: rolling speed10.1007/s10853-013-7827-2 ↗
22. Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy10.1016/j.jallcom.2017.01.236 ↗
23. An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions10.1557/jmr.2016.325 ↗
24. Constitutive modeling for flow stress behavior of nimonic 80A superalloy during hot deformation process10.1515/htmp-2014-0204 ↗
25. Prediction of steel flow stresses at high temperatures and strain rates10.1007/BF02667368 ↗
26. The kinetics and cellular automaton modeling of dynamic recrystallization behavior of a medium carbon Cr-Ni-Mo alloyed steel in hot working process10.1016/j.msea.2016.09.056 ↗
27. Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel10.1016/j.matdes.2016.05.118 ↗
28. Hot deformation behavior of Ti–22Al–25Nb alloy by processing maps and kinetic analysis10.1557/jmr.2016.188 ↗
29. Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization10.1016/j.jallcom.2017.03.240 ↗
30. Hot tensile deformation behavior and microstructural evolution of a Mg–9.3Li–1.79Al–1.61Zn alloy10.1016/j.matdes.2015.12.008 ↗
31. Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg–2.0Zn–0.3Zr alloy based on true stress–strain curves10.1016/j.msea.2012.10.025 ↗
32. Dynamic recrystallization behavior of Mg–Li–Al–Nd duplex alloy during hot compression10.1016/j.jallcom.2015.03.144 ↗
33. Kinetics of Phase Change. I General Theory10.1063/1.1750380 ↗
34. Kinetics of Phase Change. II Transformation-Time Relations for Random Distribution of Nuclei10.1063/1.1750631 ↗
35. Granulation, Phase Change, and Microstructure Kinetics of Phase Change. III10.1063/1.1750872 ↗
36. Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part I. Microstructural evolution10.1007/s11663-998-0096-9 ↗
37. Sellars · Met. Sci. · 1979 · 13 · 18710.1179/msc.1979.13.3-4.187 ↗
38. Sellars · Mater. Sci. Technol. · 1990 · 6 · 107210.1179/mst.1990.6.11.1072 ↗
39. Hot working characteristics of steels in austenitic state10.1016/0924-0136(95)01987-P ↗
40. Modelling of dynamic recrystallisation kinetics in austenitic stainless and hypereutectoid steels10.1179/026708306X81478 ↗
41. Predicting the critical strain for dynamic recrystallization using the kinetics of static recrystallization10.1016/S1359-6462(00)00424-3 ↗
42. The Avrami kinetics of dynamic recrystallization10.1016/j.actamat.2009.02.033 ↗
43. Flow behavior and processing map of as-cast Mg–10Gd–4.8Y–2Zn–0.6Zr alloy10.1016/j.msea.2010.08.090 ↗
44. Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steels10.1016/S0921-5093(03)00562-8 ↗
45. Dynamic recrystallization and precipitation in low carbon low alloy steel 26NiCrMoV 14-510.1016/j.msea.2012.04.063 ↗
46. Study on constitutive modeling and processing maps for hot deformation of medium carbon Cr–Ni–Mo alloyed steel10.1016/j.matdes.2015.11.036 ↗
47. Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy10.1016/j.matdes.2017.02.088 ↗
48. Complicated interaction of dynamic recrystallization and precipitation During hot deformation of Ultrahigh-strength stainless steel10.1007/s11661-016-3743-9 ↗
49. Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress–strain data10.1016/j.msea.2011.07.064 ↗
50. Initiation of dynamic recrystallization in constant strain rate hot deformation10.2355/isijinternational.43.684 ↗
51. Microstructure and texture evolution During hot deformation of cast-homogenized ZK60 magnesium alloy
52. Dynamic recrystallization mechanisms during high speed rolling of Mg–3Al–1Zn alloy sheets10.1016/j.scriptamat.2015.10.040 ↗
53. A study of the heterogeneity of plastic deformation in IF steel by EBSD10.1016/j.msea.2012.03.068 ↗
54. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
55. The interaction of grain refinement and ageing in magnesium–zinc–zirconium (ZK) alloys10.1016/j.actamat.2015.05.012 ↗
56. Hot deformation behavior and microstructure evolution of ZK21 magnesium alloy10.1016/j.msea.2010.03.016 ↗
57. Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at%) alloys10.1016/j.actamat.2009.07.057 ↗
58. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
59. Dynamic recrystallization behavior of AISI 304 stainless steel
60. A new kinetics model of dynamic recrystallization for magnesium alloy AZ31B10.1016/j.msea.2011.09.032 ↗