journal article·2010-11

The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration

W. Kilpatrick, D. Brown, R.J. McMurray, A.G. Leacock

Materials Science and Engineering: A· Volume 527· Issue 29-30
Publisher page

Abstract

This study investigates the effect serrated yielding (Portevin-Le Châtelier effect) has on the determination of the plastic strain ratio (r-value) for the 2024 aluminium alloy. The aluminium alloy specimens were initially in the fully annealed O-condition. The specimens experienced a softening mechanism through a solution heat treatment (SHT) process, followed by an oil quench. The specimens were permitted to recover for periods ranging between 0.5 and 12 h by room temperature (RT) natural ageing before undergoing a uniaxial tensile test along the longitudinal axis to determine the r-value as a function of natural ageing time. The current study reveals the irregular variation in the transverse strain affects the gradient of the longitudinal–transverse strain plot and consequently the r-value. It is demonstrated that the serrated yielding directly influences the Hill 1948 yield locus when calibrated using two r-values and one yield strength for the 2024 aluminium alloy. Serrated yielding results in an underestimation of the plane stress (rolling) of 0.5 ≤ plane stress rolling (MPa) ≤ 5.6, plane stress (transverse) of 1.0 ≤ plane stress transverse (MPa) ≤ 9.2, and biaxial stress of 1.4 ≤ biaxial stress (MPa) ≤ 7.4. It is also shown that serrated yielding occurs after a critical strain of 0.07 ≤ plastic strain ≤ 0.13 and is reduced by natural age hardening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Hopperstad · Model. Simul. Mater. Sci. · 2007 · 15 · 74710.1088/0965-0393/15/7/004 ↗
2. Chihab · Mater. Sci. Eng. A · 2003 · 356 · 10210.1016/S0921-5093(03)00141-2 ↗
3. Jiang · Acta Mater. · 2007 · 55 · 221910.1016/j.actamat.2006.10.029 ↗
4. Thevenet · Mater. Sci. Eng. A · 1999 · 266 · 17510.1016/S0921-5093(99)00029-5 ↗
5. Hance · J. Mater. Eng. Perform. · 2005 · 14 · 61610.1361/105994905X64576 ↗
6. Hosford · 2005
7. Gilmour · J. Mater. Process. Technol. · 2004 · 152 · 11610.1016/j.jmatprotec.2004.03.013 ↗
8. Hill · 1950
9. Leacock · J. Mech. Phys. Solids · 2006 · 54 · 42510.1016/j.jmps.2005.08.008 ↗