journal article·2015-07

Annealing texture of nanostructured steel-based composite

Roohollah Jamaati, Mohammad Reza Toroghinejad, Ali Sonboli, Jerzy A. Szpunar

Publisher page

Abstract

Abstract In this study, the evolution of annealing texture in nanostructured steel-based composite processed by accumulative roll bonding (ARB) was investigated. Textural evolution after post-annealing of ARB-processed samples was evaluated using X-ray diffraction. There was a texture transition in the e-fiber during ARB process and post-annealing treatment. Average grain size of the sample before and after the post-annealing was 73 nm and 1.8 µm, respectively, and the microstructures were relatively uniform. It was found that with increasing the number of cycles, the volume fraction of the low angle grain boundary (LAGB) decreased and that of the high angle grain boundary (HAGB) increased. Also, the shear texture was dominant after the second and third ARB cycles, while for other samples, the rolling texture was dominant. The two-cycle and three-cycle samples obviously indicated a weak α-fiber and γ-fiber and a relatively strong ζ-fiber. It was proposed that the recrystallization led to a decrease in the α-fiber and γ-fiber and rolling texture components such as {111}〈110〉 and {111}〈112〉. On the other hand, the grain growth after recrystallization resulted in an increase in the α-fiber and γ-fiber and rolling texture orientations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
2. Fabrication of ultra-thin nanostructured bimetallic foils by accumulative roll bonding and asymmetric rolling10.1038/srep02373 ↗
3. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
4. Zehetbauer · 2009
5. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
6. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
7. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗
8. Ultra-fine grained bulk aluminium produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗
9. Humphreys · 2004
10. Engler · 2010
11. Texture evolution in equal-channel angular extrusion10.1016/j.pmatsci.2009.01.001 ↗
12. Effect of alloy composition, stacking fault energy, second phase particles, initial thickness, and measurement position on deformation texture development of nanostructured FCC materials fabricated via accumulative roll bonding process10.1016/j.msea.2014.01.020 ↗
13. Texture evolution of an Fe–Ni alloy sheet produced by cross accumulative roll bonding10.1016/j.matchar.2014.09.009 ↗
14. Effect of stacking fault energy on deformation texture development of nanostructured materials produced by the ARB process10.1016/j.msea.2014.01.048 ↗
15. Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel10.1016/j.actamat.2007.07.002 ↗
16. Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process10.1016/S1359-6462(02)00088-X ↗
17. Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB)10.1016/j.msea.2012.11.017 ↗
18. Comparison of microparticles and nanoparticles effects on deformation texture of steel-based composite and nanocomposite fabricated by the ARB process10.1016/j.msea.2014.04.007 ↗
19. Microstructure and texture through thickness of ultralow carbon IF steel sheet severely deformed by accumulative roll-bonding10.1016/j.stam.2003.10.018 ↗
20. Texture and grain growth characteristics in a boron added interstitial free steel after severe cold rolling and annealing10.1016/j.msea.2009.11.019 ↗
21. Microstructural and textural changes in a severely cold rolled boron-added interstitial-free steel10.1016/j.scriptamat.2007.06.064 ↗
22. Texture and grain boundary character of a Ti+Nb–IF steel after large cold rolling reductions10.1007/s10853-007-1753-0 ↗
23. The effect of SiC nanoparticles on deformation texture of ARB-processed steel-based nanocomposite10.1016/j.matchar.2014.04.007 ↗
24. Change in microstructure and texture during annealing of pure copper heavily deformed by accumulative roll bonding10.2320/matertrans.MA200701 ↗
25. Texture development of ARB-processed steel-based nanocomposite10.1007/s11665-014-1233-z ↗
26. Annealing behaviour and mechanical properties of severely deformed interstitial free steel10.1016/j.msea.2011.10.007 ↗
27. Recrystallization textures in cold-rolled Ti bearing IF steel sheets10.2355/isijinternational.42.1278 ↗
28. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗