Effect of annealing on microstructure and tensile property of a novel ZrB alloy
Source abstract
Abstract
Abstract With the aim to develop new Zr-based alloys with excellent mechanical properties, a novel Zr-0.8B (wt%) alloy was manufactured through the following steps: casting, forging, hot-rolling and annealing treatment. The microstructure and mechanical properties of the hot-rolled and annealed Zr-0.8B alloys were investigated. The microstructure of all specimens was comprised by α and ZrB2 phases. The coarse α laths and ZrB2 whiskers were significantly refined by hot rolling. Also, a high volume of dislocations and many subgrains were formed during the hot-rolling process. A high degree of recrystallization of α phase was obtained during the annealing treatment, due to the substantially stored energy in the Zr matrix and the presence of a significant amount of subgrains. The tensile strength of the annealed Zr-0.8B alloys was decreased with the increase of annealing temperature, until 800 °C, and then increased as the heat treatment temperature was further increased to 900 °C. Many factors, such as the volume fraction of ZrB2 whiskers, grain size, dislocation density, the amount of subgrains and solution strengthening, have a significant effect on the strength. However, the elongation-to-failure showed a reverse tendency compared to the tensile strength. The reasons caused fracture of the annealed Zr-0.8B alloys are primarily attributed to dislocation pile-ups and the presence of microvoids.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. EBSD studies on microstructure and crystallographic orientation of δ-hydrides in Zircaloy-4, Zr-1% Nb, and Zr-2.5% Nb10.1016/j.msea.2011.05.022 ↗
2. Microstructural characterization of creep anisotropy at 637K in the M5® alloy10.1016/j.actamat.2012.04.001 ↗
3. The influence of grain size on the corrosion resistance of nanocrystalline zirconium metal10.1016/j.msea.2006.10.029 ↗
4. J.P. Mardon, G. Garner, P. Beslu, D. Charquer, J. Senevat, in: Proceedings of the 1997 International Topical Meeting on LWR Fuel Performance, Portland, OR, 2–6 March, 1997, p. 405.
5. K.W. Bird, P.G. Breig, T.C. Spence, Advantages of Zr705 in the acetic acid industry, in: Proceeding of 2nd NACE Asian conference, Singapore, 1994, p. 249.10.5006/C1995-95249 ↗
6. Effects of accumulated annealing parameter on the corrosion characteristics of a Zr–0.5Nb–1.0Sn–0.5Fe–0.25Cr alloy10.1016/S0022-3115(99)00288-3 ↗
7. Studies on the stability on anodic oxides on zirconium biocompatible alloys10.1590/S0103-50532002000400009 ↗
8. Pitting corrosion of zirconium-based bulk galss-matrix composites10.1016/j.msea.2005.09.062 ↗
9. Effect of isothermal annealing on the corrosion behavior of Zr–xNb alloys10.1016/j.jnucmat.2004.01.015 ↗
10. Effects of boron on microstructure in cast zirconium alloys10.1557/JMR.2010.0233 ↗
11. Microstructure and mechanical properties of novel ZrB2-reinforced zirconium10.1016/j.msea.2015.03.105 ↗
12. Processing and properties of zirconium diboride-based composites10.1016/S0955-2219(01)00284-9 ↗
13. Microstructure and mechanical properties of hot-rolled ZrB alloys10.1016/j.msea.2015.01.052 ↗
14. Importance of slip mode for dispersion-hardened β-titanium alloys10.1007/BF02643096 ↗
15. Effects of annealing treatments on microstructure and mechanical properties of the Zr–45Ti–5Al–3V alloy10.1016/j.msea.2013.06.007 ↗
16. Texture evolution and associated nucleation and growth mechanisms during annealing of a Zr alloy10.1007/s11661-009-9909-y ↗
17. Hot deformation behavior and the processing map of Zr-1.0Be alloy in single α phase10.1016/j.pnsc.2015.09.013 ↗
18. Modification of alpha morphology in Ti–6Al–4V by thermomechanical processing10.1007/BF02644991 ↗
19. Evolution of microstructural characteristic and tensile properties during preparation of TiB/Ti composite sheet10.1016/j.matdes.2011.11.060 ↗
20. Processing, microstructure, texture, and tensile properties of the Ti-6Al-4V-1.55B eutectic alloy10.1007/s11661-007-9425-x ↗
21. Effect of hot forging on microstructure and tensile properties of Ti–TiB based composites produced by casting10.1016/j.msea.2014.04.091 ↗
22. Grain refinement of cast titanium alloys via trace boron addition10.1016/j.scriptamat.2005.08.020 ↗
23. Effect of minor additions of boron on microstructure and mechanical properties of as-cast near α titanium alloy10.1007/s11661-009-0155-0 ↗
24. Evolution of microstructure and tensile properties of in situ titanium matrix composites with volume fraction of (TiB+TiC) reinforcements10.1016/j.msea.2012.04.004 ↗
25. Microstructure and texture evolution during β extrusion of boron modified Ti–6Al–4V alloy10.1016/j.msea.2012.01.120 ↗
26. Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti–6Al–4V composites10.1016/j.scriptamat.2011.12.024 ↗
27. Metal and intermetallic matrix in-situ particle composites10.4028/www.scientific.net/KEM.104-107.313 ↗
28. Effect of forging temperature on microstructure and mechanical properties of in situ (TiB+TiC)/Ti composites10.2320/matertrans.47.1750 ↗
29. Ultrafine grained Ti-based composites with ultrahigh strength and ductility achieved by equiaxing microstructure10.1016/j.matdes.2015.04.032 ↗
30. Biomedical TiNbZrTaSi alloys designed by d-electron alloy design theory10.1016/j.matdes.2015.06.176 ↗
31. Strength and tension/compression asymmetry in nanostructured and ultrafine-grain metals10.1016/S1359-6454(03)00286-6 ↗
32. Deformation mechanism transitions in nanoscale fcc metals10.1080/09500830310001614540 ↗