journal article·2016-06

Global and local characteristics of an autogenous single pass electron beam weld in thick gage UNS S41500 steel

S. Sarafan, P. Wanjara, J. Gholipour, H. Champliaud

Publisher page

Abstract

Abstract Electron beam welding of UNS S41500, a low carbon martensitic stainless steel utilized in hydroelectric turbine manufacturing, was investigated by applying a single pass autogenous process to penetrate a section thickness of 72 mm without preheating. In the as-welded and post-weld heat treated conditions, the evolution in microhardness and microstructure across the weldments, as well as the global and local tensile properties, were evaluated. In the as-welded condition, assessment of the microhardness and the associated microstructure across the welds led to the identification of six regions, including the fusion zone, four heat affected zones and the base metal; each of these regions consisted of different phase constituents, such as tempered martensite, untempered martensite, delta ferrite and retained austenite. Post-weld heat treatment, undertaken to temper the untempered martensite in the as-welded microstructure, was effective in homogenizing the hardness across the weldment. The mechanical response of the welds, determined through tensile testing at room temperature with an automated non-contact three-dimensional deformation measurement system, indicated that the global tensile properties in the as-welded and post-weld heat treated conditions met the acceptance criteria in the ASME Section IX standard. Also, evaluation of the local tensile properties in the fusion and heat affected zones of the as-welded samples allowed a more comprehensive understanding of the strength and ductility associated with the different microstructures in the “composite” nature of the weldment. Fractographic analysis demonstrated dimpled features on the tensile fracture surfaces and failure was associated with debonding between the martensitic matrix and the secondary phases (such as delta ferrite and retained austenite) that resulted in the formation, growth and coalescence of voids into a macroscale crack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Heat treatment of welded 13%Cr-4%Ni martensitic stainless steels for sour service
2. Residual stress and microstructure in welds of 13%Cr–4%Ni martensitic stainless steel10.1016/j.jmatprotec.2008.05.005 ↗
3. Effect of δ-ferrite on impact properties of supermartensitic stainless steel heat affected zones10.1179/136217104225021823 ↗
4. Factors affecting initiation of pitting corrosion in super martensitic stainless steel weldments10.1179/136217101101538866 ↗
5. Characteristics and effects of austenite resulting from tempering of 13Cr–NiMo martensitic steel weld metals10.1016/S1044-5803(00)00099-1 ↗
6. Meleka · 1971
7. Advanced welding processes for fusion reactor fabrication10.1016/S0920-3796(00)00407-5 ↗
8. ASTM A 240/A 240M · 2004
9. Côté · 2007
10. ASME, Boiler and Pressure Vessel Code, Section VIII Div. 1: Rules for Construction of Pressure Vessels. American Society of Mechanical Engineers, 2010
11. Characteristics of an autogenous single pass electron beam weld in thick gage CA6NM steel10.1007/s00170-014-6713-7 ↗
12. Introduction to the Rietveld method
13. ASTM E384–11e1 · 2011
14. ASTM E8/E8M-15a, Standard test methods of tension testing of metallic materials, American Society for Testing and Materials 3.01, 2013
15. ARAMIS User Handbook, Gesellschaft fur Optische Messtechnik GmbH, Braunschweig, Germany, 2001.
16. Effect of pre-and post-weld heat treatments on linear friction welded Ti-555310.1007/s11661-014-2475-y ↗
17. Folkhard · 1988
18. Anomalous phase transformation from martensite to austenite in Fe-13%Cr-4%Ni-Mo martensitic stainless steel10.1016/S1005-0302(10)60131-4 ↗
19. Characteristics of electron beam welded CA6NM
20. F. Mirakhorli, X. Cao, X.T. Pham, P. Wanjara, J.L. Fihey, Hybrid fiber laser-arc welding of 10-mm thick CA6NM stainless steel, in: Proceeding of Material Science and Technology,1891–1900, USA, 2014.
21. ASME, Boiler and Pressure Vessel Code, Section IX: qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators. American Society of Mechanical Engineers, 2010
22. Influence of tempering process on mechanical properties of 00Cr13Ni4Mo supermartensitic stainless steel10.1016/S1006-706X(10)60128-8 ↗
23. Johnson · 1990
24. P. Nguyen-Duy, V. Tremblay, J. Lanteigne, Effect of hydrogen and tempering temperature on mechanical properties and fracture morphology of SAE 4135 steel, in: Proceedings of the 8th International Conference on the Strength of Metals and Alloys Tampere, 22–26, Finland, 1988.10.1016/B978-0-08-034804-9.50204-7 ↗