journal article·2005-03Open access

Thixoforming of a high performance HP9/4/30 steel

M.Z. Omar, E.J. Palmiere, A.A. Howe, H.V. Atkinson, P. Kapranos

Materials Science and Engineering: A· Volume 395· Issue 1-2

Abstract

Abstract Thixoforming is a forming process that shapes metal components in their semi-solid state. Prior to forming, the microstructure of the alloy consists preferably of solid metal spheroids in a liquid matrix, which can be difficult to achieve with hot-worked, high alloy steels prone to strong microsegregation bands. A high performance HP9/4/30 steel has been assessed for thixoformability through a direct remelting route. Partial remelting was carried out between 1430 and 1470 °C. Liquation occurred initially at grain boundaries, then also along the segregation bands. With increasing time and hold temperature, these “columns” broke down into shorter, more equiaxed segments, offering more chance of being thixoformed. Successful thixoforming producing net-shape demonstrator parts was achieved at processing temperatures in the range of 1470–1480 °C, which corresponds to approximately 50–80% liquid (based on differential thermal analysis ). A thin solid skin, formed on the surface of the slug as a result of heat loss, had prevented the slug from collapsing. The resulting thixoformed products are discussed in relation to their load–displacement signals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Spencer · Met. Trans. A · 1972 · 3 · 192510.1007/BF02642580 ↗
2. Flemings · Met. Trans. A · 1991 · 22 · 95710.1007/BF02661090 ↗
3. Nohn · 2000 · 265
4. Kapranos · Journal De Physique IV, Colloque C7, Supplément au Journal de Physique III · 1993 · 3 · 835
5. Kapranos · 1996 · 306
6. Kapranos · Mater. Des. · 2000 · 21 · 38710.1016/S0261-3069(99)00077-1 ↗
7. Kirkwood · Int. Mater. Rev. · 1994 · 39 · 17310.1179/imr.1994.39.5.173 ↗
8. Fan · Int. Mater. Rev. · 2002 · 47 · 4910.1179/095066001225001076 ↗
9. Aerospace Material Specification, AMS 6526C, The Engineering Society For Advanced Mobility Land, Sea, Air and Space, Society of Automotive Engineers, Inc., 1989.
10. Püttgen · Steel Res. Int. · 2004 · 75 · 53110.1002/srin.200405807 ↗
11. Tzimas · J. Mater. Sci. · 2000 · 35 · 531910.1023/A:1004890711322 ↗
12. Kopp · 2000 · 599
13. Kopp · J. Mater. Process. Technol. · 2002 · 130–131 · 56210.1016/S0924-0136(02)00766-5 ↗
14. American Society For Testing and Materials, ASTM E 112-96, 1996.
15. American Society For Testing and Materials, ASTM E 1245-95, 1995.
16. Kapranos · Mater. Sci. Technol. · 1996 · 12 · 27410.1179/mst.1996.12.3.274 ↗
17. Lugscheider · 2000 · 587
18. Kopp · 2002 · 659
19. Kapranos · J. Eng. Manuf. B · 1993 · 207 · 110.1243/PIME_PROC_1993_207_055_02 ↗
20. Metals Handbook, vol. 15, 9th ed., ASM International, Ohio, 1998, pp. 406–408.
21. Engineering Materials Specification, Document No. EMS96247, AiResearch Los Angeles Division, 1989, pp. 1–12.
22. Rush · NASA Tech. Memo. · 1984 · 85816
23. Metals Handbook, vol. 9, 9th ed., ASM International, Ohio, 1985, pp. 177–185.
24. Rostoker · 1977
25. K. Burke, Ph.D. Thesis, Department of Engineering Materials, The University of Sheffield, February, 1998.
26. Chayong · 2000 · 649
27. H.E. Pitts, Ph.D. Thesis, Department of Engineering Materials, The University of Sheffield, February, 1999.
28. Omar · Steel Res. Int. · 2004 · 75 · 55210.1002/srin.200405810 ↗
29. Rudnev · 2003
30. Kapranos · 1996 · 148
31. Hogg · Metall. Mater. Trans. A · 2004 · 35 · 89910.1007/s11661-004-0015-x ↗
32. S. Chayong, Thixoforming processing of aluminium 7075 alloy, Ph.D. Thesis, Department of Engineering Materials, The University of Sheffield, March, 2002.
33. Liu · Metall. Mater. Trans. A · 2003 · 34 · 154510.1007/s11661-003-0266-y ↗
34. Kopp · J. Mater. Process. Technol. · 2003 · 135 · 31710.1016/S0924-0136(02)00863-4 ↗
35. System Description and Operating Manual for Thixoforging Machine, A702, vol. 1, Sheffield University, November, 1988, pp. 27–36.