Properties of Y-TZP/Al2O3 ceramic nanocomposites obtained by high-energy ball milling
Source abstract
Abstract
Abstract In this work, the synthesis of Y 2 O 3 stabilized tetragonal zirconia polycrystals (Y-TZP)-alumina (Al 2 O 3 ) powder mixture was performed by high-energy ball milling and the sintering behavior of this composite was investigated. In order to understand the phase transformations occurring during ball milling, samples were collected after different milling times, from 1 to 60 h. The milled powders were compacted by cold uniaxial pressing and sintered at 1400 and 1600 °C. Both powders and sintered samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry analysis (EDS) and mechanical properties. Fully dense samples were obtained after sintering at 1600 °C, while the samples sintered at 1400 °C presented a full density for powder mixtures milled for 30 and 60 h. Fracture toughness and Vickers hardness values of the Y-TZP/Al 2 O 3 nanocomposite were improved due to dispersed Al 2 O 3 grains and reduced ZrO 2 grain size. Samples sintered at 1400 °C, based on powders milled for 60 h, presented high K IC and hardness values near to 8.0 MPam 1/2 and 15 GPa, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Stevens · 1986
2. Basu · Mater. Sci. Eng. A · 2004 · 366 · 33810.1016/j.msea.2003.08.063 ↗
3. Kisi · Key Eng. Mater. · 1998 · 1–36 · 153
4. Taya · J. Am. Ceram. Soc. · 1990 · 73 · 138210.1111/j.1151-2916.1990.tb05209.x ↗
5. Shi · J. Mater. Res. · 2000 · 15 · 72710.1557/JMR.2000.0105 ↗
6. Farnê · J. Eur. Ceram. Soc. · 1999 · 19 · 34710.1016/S0955-2219(98)00207-6 ↗
7. C. Santos, L.H.P. Teixeira, J.K.M.F. Daguano, S.O. Rogero, K. Strecker, C.N. Elias, Ceram Int., in press.
8. Sadangi · Int. J. Refract. Met. Hard Mater. · 2005 · 23 · 36310.1016/j.ijrmhm.2005.03.009 ↗
9. Chraska · Ceram. Int. · 2008 · 34 · 122910.1016/j.ceramint.2007.04.001 ↗
10. Menezes · J. Mater. Process. Technol. · 2008 · 203 · 51310.1016/j.jmatprotec.2007.10.057 ↗
11. Zhou · Mater. Sci. Eng. A · 2005 · 394 · 35310.1016/j.msea.2004.11.037 ↗
12. Suryanarayana · Prog. Mater. Sci. · 2001 · 46 · 0110.1016/S0079-6425(99)00010-9 ↗
13. Benjamin · Mater. Sci. Forum · 1992 · 88–90 · 110.4028/www.scientific.net/MSF.88-90.1 ↗
14. P.H. Shingu, Mechanical Alloying, Trans Tech. Publications, 1991.10.4028/b-XNw5fh ↗
15. Benjamin · Sci. Am. · 1976 · 234 · 4010.1038/scientificamerican0576-40 ↗
16. Benjamin · Met. Powder Rep. · 1990 · 45 · 12210.1016/S0026-0657(10)80124-9 ↗
17. Kwon · Mater. Sci. Eng. · 2001 · A299 · 18510.1016/S0921-5093(00)01376-9 ↗
18. Michel · J. Am. Ceram. Soc. · 1993 · 7610.1111/j.1151-2916.1993.tb04031.x ↗
19. Chen · Mater. Sci. Forum · 1995 · 133 · 179
20. Duran · J. Eur. Ceram. Soc. · 1996 · 16 · 94510.1016/0955-2219(96)00015-5 ↗
21. Sproull · 1946
22. Klug · 1974
23. Strecker · Int. J. Refract. Met. Hard Mater. · 2004 · 22 · 16910.1016/j.ijrmhm.2004.05.001 ↗
24. Wang · J. Am. Ceram. Soc. · 2005 · 88 · 78010.1111/j.1551-2916.2005.00105.x ↗
25. Mitsuhashi · J. Am. Ceram. Soc. · 1974 · 52 · 9710.1111/j.1151-2916.1974.tb10823.x ↗
26. Shukla · Int. Mater. Rev. · 2005 · 50 · 4510.1179/174328005X14267 ↗
27. Ramamoorthy · J. Eur. Ceram. Soc. · 1999 · 19 · 182710.1016/S0955-2219(98)00287-8 ↗
28. German · 1996