Investigation of a dissimilar vitreloy 105 to grade 2 titanium laser weld
Source abstract
Abstract
Abstract The unique combination of mechanical properties and the ability to be processed using injection molding techniques makes bulk metallic glasses (BMGs) excellent candidates for use in engnineering applications, especially in the medical device industry. Widespread use of BMGs is hindered by their inability to be joined to common engineering materials (ex. titanium) with standard fusion welding techniques (ex. laser welding). In this paper a definitive screening design experiment was performed to optimize a dissimilar Vitreloy 105 to grade 2 titanium laser weld. The optimized weld was then characterized using nanoindentation, scanning electron micrscopy, micro cantilever beam bending, and transmission electron microscopy. It was found that the optimized weld had lower hardness, a more uniform structure, and better performance than the baseline seam weld between the dissimilar materials. The microstructural and micromechanical characterization of the optimized joints showed variation in local mechanical properties that were correlated to chemistry and microstructure ranging from brittle fracture at low loads to ductility and toughness arising from shear band blunting. Not only did the optimized welding process confrim that Vitreloy 105 could be successfully laser joined to grade 2 titanium with properties acceptable for many applications, the investigation into the local structure and properties of the joint revealed the possibility of creating ductile metallic glass composites by controlling the chemistry and structure of the intermetalic zone while processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Suryanarayana · 2011
2. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
3. A thermoplastic forming map of a Zr-based bulk metallic glass10.1016/j.actamat.2012.12.013 ↗
4. Thermoplastic micro-forming of bulk metallic glasses: a review10.1007/s11837-016-1844-y ↗
5. Processing of bulk metallic glass10.1002/adma.200902776 ↗
6. Thermoplastic forming of bulk metallic glasses10.1111/j.2041-1294.2012.00083.x ↗
7. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
8. Pulsed Nd:YAG laser welding of Cu54Ni6Zr22Ti18 bulk metallic glass10.1016/j.msea.2006.02.323 ↗
9. High-power fiber laser welding and its application to metallic glass Zr55Al10Ni5Cu3010.1016/j.mseb.2007.09.062 ↗
10. Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass10.1016/j.intermet.2013.11.008 ↗
11. Laser welding of Ti40Zr25Ni3Cu12Be20 bulk metallic glass10.1016/j.msea.2012.01.114 ↗
12. Electron-beam welding of Zr-based bulk metallic glasses10.1016/j.msea.2003.10.085 ↗
13. Joining of Ti-based bulk metallic glasses using resistance spot welding technology10.1016/j.jmatprotec.2012.03.020 ↗
14. Welding technologies of bulk metallic glasses10.1016/S0022-3093(02)02005-7 ↗
15. Weldability of Cu54Zr22Ti18Ni6 bulk metallic glass by ultrasonic welding processing10.1016/j.matlet.2014.05.056 ↗
16. Selective laser melting of Zr-based bulk metallic glasses: processing, microstructure and mechanical properties10.1016/j.matdes.2016.09.071 ↗
17. Electron beam welding of the dissimilar Zr-based bulk metallic glass and Ti metal10.1016/j.scriptamat.2006.12.046 ↗
18. Dissimilar welding of Zr41Be23Ti14Cu12Ni10 bulk metallic glass and stainless steel10.1016/j.scriptamat.2011.06.032 ↗
19. Electron beam welding of Zr-based BMG/Ni joints: effect of beam irradiation position on mechanical and microstructural properties10.1016/j.jmatprotec.2007.12.090 ↗
20. Laser welding of Zr41Ti14Cu12Ni10Be23 bulk metallic glass and zirconium metal
21. A class of three-level designs for definitive screening in the presence of second-order effects10.1080/00224065.2011.11917841 ↗
22. Definitive screening designs with added two-level categorical factors10.1080/00224065.2013.11917921 ↗
23. Laser processing of reflective materials10.1002/latj.201390001 ↗
24. Vander Voort · 1984
25. Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams10.1557/JMR.2005.0048 ↗
26. Mechanical properties of SiC coatings on spherical particles measured using the micro-beam method10.1016/j.scriptamat.2008.02.022 ↗
27. Welding: solidification and microstructure10.1007/s11837-003-0134-7 ↗
28. Kannatey-Asibu · 2009
29. Chapter 5 laser processing
30. Montgomery · 2017
31. Definitive screening designs with added two-level categorical factors”10.1080/00224065.2013.11917921 ↗