journal article·2006-11

Cyclic isothermal stress-induced transformations in high temperature Cu–13.1Al–4.0Ni (wt.%) shape memory alloy single crystal wires

Ganesh K. Kannarpady, Abhijit Bhattacharyya

Publisher page

Abstract

Abstract Isothermal stress-induced transformations in Cu–13.1Al–4.0Ni (wt.%) single crystal wires were studied up to an overall strain of 8.62% and cycled until stabilization at test temperatures in the range, 25–175 °C, after the material had been heated from room temperature. A total of 26 cycles were needed for stabilization. A partial phase diagram of the cycled material is then developed. A second set of tests on the same material was carried out by heating the material to 175 °C and then cooling it to the test temperature, prior to the mechanical tests. A total of 18 cycles were needed for stabilization. Two-way shape memory strain started to accumulate from the 39th mechanical cycle, rising to as high as 3% at the end of the 44th cycle. No plastic strain was observed during the entire sequence of 44 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Sehitoglu · Mater. Sci. Eng. A · 2001 · 314 · 6710.1016/S0921-5093(00)01924-9 ↗
2. Gall · Acta Mater. · 2002 · 50 · 464310.1016/S1359-6454(02)00315-4 ↗
3. Sade · Acta Metall. · 1985 · 33 · 48710.1016/0001-6160(85)90091-4 ↗
4. Kato · Mater. Trans. JIM · 1998 · 39 · 37810.2320/matertrans1989.39.378 ↗
5. G.K. Kannarpady, A. Bhattacharyya, I. Viahhi, S. Pulnev, J. Alloys & Comp., in press, doi:10.1016/j.jallcom.2006.01.022.10.1016/j.jallcom.2006.01.022 ↗
6. Otsuka · Proc. Solid Solid Phase Trans. · 1981 · 1267
7. Otsuka · 1977 · vol. 2(2) · 81