journal article·1995-02Open access

In-situ refractory intermetallic-based composites

Dilip M. Shah, Donald L. Anton, David P. Pope, Stephen Chin

Abstract

With the ultimate objective of exploiting refractory intermetallics for high-temperature structural materials, several binary and ternary two-phase intermetallics/refractory-metal solid solutions were explored. The ductile solid solution is used to toughen the composite microstructure via in-situ phase separation. While the viability of ductile phase separation in solid state was briefly considered for systems such as Nb3Al/Nb, much of the work focused on processing eutectic systems such as Cr2Nb/Nb and (Nb,Mo)5Si3/Nb,Mo). This paper describes results obtained via containerless directional solidification of these high-melting eutectic alloys using an optical float-zone furnace. The observations are explained on the basis of solidification theory and parameters unique to the optical float-zone furnace. It is demonstrated that, by this technique, casting-defect- and macrosegregation-free material, with well-aligned microstructure, can be readily produced. Moreover, the potential to approach sub-micron laminate spacing at high growth rate in alloys with very high melting eutectics has also been established. Room-temperature bend test evaluation of directionally solidified material is discussed in light of prevailing theories of ductile phase toughening. The results of a preliminary exploration of the NbMoCrSiAl multicomponent system are presented, showing the prevalence of eutectic phase separation and the potential for improving oxidation resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Dimiduk · 1993 · 619
2. Development potential of intermetallics compounds
3. Development potential of advanced intermetallics materials
4. Fleischer · JOM · 1989 · 41 · 810.1007/BF03220323 ↗
5. Anton · JOM · 1989 · 41 · 1210.1007/BF03220324 ↗
6. Shah · 1992 · 402
7. Anton · 1992 · 410
8. Shah · Mater. Sci. Eng. · 1992 · A155 · 4510.1016/0921-5093(92)90311-N ↗
9. Vasudevan · Mater. Sci. Eng. · 1992 · A155 · 110.1016/0921-5093(92)90308-N ↗
10. Shah · 1993 · 755
11. Maloney · Mater. Sci. Eng. · 1992 · A155 · 1910.1016/0921-5093(92)90309-O ↗
12. Mendiratta · Metall. Trans. A · 1991 · 22 · 157310.1007/BF02667370 ↗
13. Frommeyer · Z. Metallkde. · 1990 · 81 · 307
14. Shah · 1992 · 273 · 385
15. Rowe · 1992 · 273 · 411
16. T.N. Mareb, A.D. Kaiser, S.R. Nutt, D.L. Anton and D.M. Shah, in L.A. Johnson, D.P. Pope and J.O. Stiegler (eds.), High-Temperature Ordered Intermetallic Alloys IV, MRS Symp. Proc., 213, MRS, Pittsburgh, PA, pp. 329–336.
17. Pope · 1993
18. 1982 · 12
19. In-Situ Synthesis of Intermetallic Matrix Composites
20. In-Situ Synthesis of Intermetallic Matrix Composites
21. Bewlay · Mater. Sci. Eng. · 1995 · A191–193
22. Fundamentals of Solidification
23. Maurer · 1989 · 58
24. Toloui · 1982 · 12 · 253
25. 1965 · 234
26. Goldschmidt · J. Less-Common Metals · 1961 · 3 · 3410.1016/0022-5088(61)90041-8 ↗
27. Investigation of Fracture Resistance in Microstructures of Intermetallic Materials for High Temperature Service
28. Shaw · Acta Metall. Mater. · 1993 · 41 · 331110.1016/0956-7151(93)90060-6 ↗
29. Gleiter · Nanostruct. Mat. · 1992 · 1 · 110.1016/0965-9773(92)90045-Y ↗
30. Froes · JOM · 1989 · 41 · 1210.1007/BF03220243 ↗
31. Lewandowski · Metall. Trans. · 1986 · 17A · 176910.1007/BF02817275 ↗
32. Goldschmidt · J. Less-Common Metals · 1961 · 3 · 4410.1016/0022-5088(61)90042-X ↗