Strain path dependence of anisotropic microstructure evolution on low Stacking Fault Energy F138 steel
Source abstract
Abstract
Abstract Severe Plastic Deformation (SPD) techniques are widely used nowadays because of the mechanical properties improvements caused by grain refinement and development of dislocation arrays. Diffraction techniques can be used to assess the changes registered in the microstructure through these methods. Two sets of samples of F138 austenitic stainless steel were analyzed in this paper: one set was deformed by ECAE up to two pressings at room temperature, and the other set was cold rolled to 70% reduction and annealed at 600, 700, 800 and 900 °C for 1 h. The microstructural changes were determined using X-Ray diffraction and EBSD, combining both, global and local information and characterizing domain sizes, dislocation and stacking fault densities and misorientation degree and distribution caused by the different thermomechanical processing. It was observed that, despite cold rolling and 2 ECAE passes rendered rather similar von Mises deformations, the microstructure through each deformation method was different: 2 ECAE passes seem to be more effective for grain refinement and generation of equiaxed domains than cold rolling. The more significant twin activation observed in the former sample, because of continuous strain path change, may explain the difference, although dislocation densities and mechanical properties did not differ substantially for both deformation methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Microstructure evolution of pure nickel up to a high strain level during equal-channel angular pressing
2. Effects of stacking fault energy, strain rate and temperature on microstructure and strength of nanostructured Cu–Al alloys subjected to plastic deformation10.1016/j.actamat.2011.06.013 ↗
3. Barrett · 1980 · 395
4. X-ray line broadening from filed aluminum and wolfram10.1016/0001-6160(53)90006-6 ↗
5. Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals10.1107/S0021889801003715 ↗
6. Densities and character of dislocations and size-distribution of subgrains in deformed metals by X-ray diffraction profile analysis10.1016/S0921-5093(01)01025-5 ↗
7. X-ray studies of deformed metals10.1016/0502-8205(59)90015-2 ↗
8. G. Ribárik, Modeling of Diffraction Patterns Based on Microstructural Properties, Ph.D. Thesis, 2008. 〈http://csendes.elte.hu/cmwp/doc/Ribarik-PhD-Thesis.pdf〉.
9. Schwartz · 2000
10. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
11. Revisiting stacking fault energy of steels10.1007/s11661-015-3266-9 ↗
12. Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion10.1016/j.msea.2010.12.023 ↗
13. Evaluation of microstructure anisotropy on room and medium temperature ECAP deformed F138 steel10.1016/j.matchar.2015.06.035 ↗
14. XRD and EBSD analysis of anisotropic microstructure development in cold rolled F138 stainless steel10.1016/j.matchar.2016.11.018 ↗
15. Bestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen
16. Choice of collimators for a crystal spectrometer for neutron diffraction10.1016/0369-643X(58)90029-X ↗
17. The contrast factor of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
18. Contrast factors of dislocations in the hexagonal crystal system10.1107/S0021889802009536 ↗
19. Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations10.1016/S1359-6462(02)00358-5 ↗
20. Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
21. Characterization of the microstructure in random and textured polycrystals and single crystals by diffraction line profile analysis10.1016/j.msea.2010.08.059 ↗
22. Ducheyne · 1984
23. Semlitsch · 1984 · 1
24. Selection of materials for prototype fast breeder reactor
25. Fatigue properties of type 316LN stainless steel in air and mercury10.1016/j.jnucmat.2005.03.019 ↗
26. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
27. Application of EBSD technique to ultrafine grained and nanostructured materials processed by severe plastic deformation: sample preparation, parameters optimization and analysis10.1016/S1003-6326(11)61390-3 ↗
28. Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB)10.1016/j.msea.2012.11.017 ↗
29. Microstructural evolution and mechanical properties on an ARB processed IF steel studied by X-ray diffraction and EBSD10.1016/j.matchar.2016.05.025 ↗
30. Electron backscatter diffraction: Strategies for reliable data acquisition and processing10.1016/j.matchar.2009.05.011 ↗
31. N.S. DeVincentis, Microstructural investigation of materials by a combination of Electron Backscatter Diffraction (EBSD and X-ray diffraction (XRD) techniques, Ph.D. Thesis, 2015.
32. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
33. Influence of grain size and stacking-fault energy on deformation twinning in fcc metals10.1007/s11661-999-0272-9 ↗