journal article·2017-08

Dynamic compressive behaviour of weld joints

Thora E. Falkenreck, Maximilian Klein, Thomas Böllinghaus

Publisher page

Abstract

Abstract Materials used in military applications have to withstand multiple threats like ballistics and explosions. Thus, high-strength low alloyed (HSLA) steels are used. The main joining technique for metals is welding. Therefore, analysing the dynamic impact behaviour of high-strength welds is very important to fulfil these demands. Investigation of welds at high strain rates has rarely been conducted in the past. To determine the dynamic impact behaviour of hybrid laser-arc welds, the Split Hopkinson Pressure Bar (SHPB) technique was used. The base material was a quenched and tempered fine-grained armour steel with yield strength of 1100 MPa. First, a full hybrid laser-arc weld was investigated by extracting specimens consisting of weld metal and heat affected base material. The influence of two variables, the cooling time between 800 °C and 500 °C (t 8/5 ) and strength of filler material, on the impact behaviour was studied. The cooling time t 8/5 was varied by preheating to influence the microstructure in the HAZ and to analyse the effect on the hardness and dynamic compressive strength. Subsequent analysis to detail the original investigation was carried out by dilatometer heat treatment of specimens to create homogenous subzones of the weld. These specimens have a homogenous microstructure of HAZ and were tested by SHPB to determine the stress-strain characteristics for the different microstructures of HAZ. The results of the weld specimen showed the effect of preheating and filler material strength on the dynamic compressive behaviour. The analysis of the different microstructures of the HAZ indicated that especially the tempered microstructure caused a reduction in dynamic compressive strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Advances in high strength steel technology for naval hull construction10.4028/www.scientific.net/KEM.84-85.491 ↗
2. Metallography of HSLA steel weldments10.4028/www.scientific.net/KEM.69-70.1 ↗
3. Characterization of microstructural strengthening in the heat-affected zone of a blast-resistant naval steel10.1016/j.actamat.2010.06.031 ↗
4. The significance of softened HAZs in high strength structural steels10.1007/BF03266387 ↗
5. Ballistic performance of high-strength low-alloy steel weldments10.1016/0924-0136(95)02041-1 ↗
6. Investigation of heat affected zone softening in armour steels part 1 – phase transformation kinetics10.1179/1362171812Y.0000000100 ↗
7. Dynamic behaviors of 0Cr18Ni10Ti stainless steel welded joints at elevated temperatures and high strain rates10.1016/j.mechmat.2008.10.005 ↗
8. The effects of strain rate and welding current mode on the dynamic impact behavior of plasma-arc-welded 304L stainless steel weldments10.1007/s11661-004-0258-6 ↗
9. Dynamic strength of steel welds under high strain rate loading10.4028/www.scientific.net/AMR.9.87 ↗
10. Influence of the heat affected zone on the dynamic behavior of a welded joint of armoured steel10.1016/j.ijimpeng.2016.12.022 ↗
11. F. Wallner, R. Schimböck, R. Rauch, Verbesserte und neue TM-Stähle für geschweißte Konstruktionen (Advanced and new TMCP-steels for welded constructions), in: Int. Schweiß-Und Fert. Tagung, 2000.
12. Easterling · 1992
13. Burgan · 2001
14. Linnert · 1967 · Volume 2
15. Cary · 2005
16. Dynamic plastic behavior of 63 wt% Sn 37 wt% Pb eutectic solder under high strain rates10.1023/A:1015776820115 ↗
17. T. Gladman, The Physical Metallurgy of Microalloyed Steels, London, 1997.
18. HAZ softening Nb-, Ti- and Ti + V-bearing quenched and tempered steel welds10.1007/s40194-016-0299-7 ↗
19. Softening kinetics in the subcritical heat-affected zone of dual-phase steel welds10.1007/s11661-010-0323-2 ↗
20. The design of advanced performance high strength low- carbon martensitic armour steels: microstructural considerations10.1016/j.msea.2007.07.078 ↗
21. ISO/TR 17671-2: Welding – Recommendations for Welding of Metallic Materials – Part 2, 2002.
22. Oerlikon: CARBOFIL NiMo1 GMAW Solid Wire, 2016.
23. Boehler Welding: Union X 96 GMAW Solid Wire, 2005.
24. T. Falkenreck, A. Kromm, T. Böllinghaus, Investigation of physically simulated weld HAZ and CCT-diagram of HSLA steel, Weld. World, 2017 (In press).10.1007/s40194-017-0511-4 ↗
25. A method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets10.1098/rsta.1914.0010 ↗
26. A critical study of the Hopkinson pressure bar10.1098/rsta.1948.0001 ↗
27. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
28. Chen · 2011
29. DIN 50159-1: Metallische Werkstoffe- Härteprüfung nach dem UCI-Verfahren- Teil 1 (Metallic Materials – Hardness Testing with the UCI Method – Part 1), 2015.
30. Transformation twins in vanadium-bearing mild steels
31. J.L. Nili, W.S. Owen, Deformation Twinning of Martensite, 3, 1972.10.1007/BF02642573 ↗
32. Crystallography of deformation twinning of martensite in alloy Fe-25.2% Ni-0.5% C
33. Transformation twins in the weld HAZ of a low-carbon high-strength microalloyed steel10.1016/j.msea.2006.07.055 ↗
34. Observation of twinned martensite in weld heat affected zone of Grade 100 low carbon microalloyed steel observation of twinned martensite in weld heat affected zone of Grade 100 low carbon microalloyed steel10.1179/136217104225011590 ↗
35. Fracture and ballistic-induced phase transformation in tempered martensitic low-carbon armour steels10.1016/j.msea.2006.06.033 ↗
36. S. Allain, J. Chateau, D. Dahmoun, O. Bouaziz, Modeling of Mechanical Twinning in a High Manganese Content Austenitic steel, 389, 2004, pp. 272–276. 〈https://dx.doi.org/10.1016/j.msea.2004.05.038〉.10.1016/j.msea.2004.05.038 ↗
37. H. Najafi, S. Asgari, Strain Hardening Mechanisms in Aged AEREX350 Superalloy, 398, 2005, pp. 204–208. 〈https://dx.doi.org/10.1016/j.msea.2005.03.015〉.10.1016/j.msea.2005.03.015 ↗
38. M.C. Tsai, C.S. Chiou, J.S. Du, J.R. Yang, Phase Transformation in AISI 410 Stainless Steel, 332, 2002, pp. 1–10.10.1016/S0921-5093(01)01710-5 ↗
39. H. Paul, J.H. Dri, C. Maurice, Z. Jasien, Shear Band Microtexture Formation in Twinned Face Centred Cubic Single Crystals, 359, 2003, pp. 178–191. 〈https://dx.doi.org/10.1016/S0921-5093(03)00335-6〉.10.1016/S0921-5093(03)00335-6 ↗
40. B.B. Rath, Formation of Annealing, 45, 1997, pp. 633–2638.10.1006/geno.1997.5016 ↗
41. S.D. Bhole, J.B. Nemade, L. Collins, C. Liu, Effect of Nickel and Molybdenum Additions on Weld Metal Toughness in a Submerged Arc Welded HSLA Line-Pipe Steel, 173, 2006, pp. 92–100. 〈https://dx.doi.org/10.1016/j.jmatprotec.2005.10.028〉.10.1016/j.jmatprotec.2005.10.028 ↗
42. Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel10.1016/j.msea.2005.02.054 ↗
43. T. Weerasooriya, P. Moy, Effect of strain-rate on the deformation behavior of rolled-homogeneous- armor (RHA) steel at different hardnesses, in: Proceedings of the SEM Int. Congr., 2004.