journal article·2023-05Open access

Experimental characterization of cyclic behaviour of pure lead: Temperature sensitivity and strain-rate effects

E. Solfiti, L.M. Viespoli, M.A. Lervåg, T.A. Kristensen, R. Esposito, M. Calviani, R. Franqueira Ximenes, F. Berto, A. Alvaro

Abstract

Proton beam pulses with an energy of 20 GeV/c collide with a pure-lead based target installed in the neutron Time-Of-Flight facility (n_TOF) at the European Laboratory for Particle Physics (CERN). The interaction between the proton beam and lead produces neutrons via spallation mechanism and results in a rapid temperature increase and propagation of stress waves. To evaluate the material response in such challenging conditions, a reliable thermo-mechanical characterization is necessary for the calibration of an appropriate constitutive model for pure lead that is valid under cyclic plasticity and high temperature. In this work, the experimental bases for the development of such constitutive material description are lied. Starting with metallurgical characterization, the typical grain size of the material was initially investigated as well as any variations in the metallurgical features. The grains appeared to have an equivalent size ranging from 2 to 6 mm. Then, static tensile tests were conducted at room temperature and different strain-rates from 10−1 to 10−4 s−1. The obtained results were crucial for optimizing the specimen geometry and test setup for the subsequent cyclic tests. Tension-compression cyclic tests were performed at different strain amplitudes from 0.1 to 1.5%, and at three different temperatures (room temperature, 90 °C and 150 °C). The strain amplitudes were controlled by an extensometer and the strain field evolution during the test was recorded by means of 2D DIC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Nuclear Physics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Dollins · 1956
2. Kassner · 2015
3. Creep-fatigue interaction: its mechanism and predictability
4. Rapid extrapolation of high‐temperature low‐cycle fatigue curves for a nickel superalloy10.1002/mdp2.104 ↗
5. Fatigue crack initiation and propagation at high temperature of new-generation bearing steel10.3390/met11010025 ↗
6. High strain rate constitutive behavior of SAC105 and SAC305 leadfree solder during operation at high temperature10.1016/j.microrel.2016.03.014 ↗
7. Determination of anand constants for SAC solders using stress-strain or creep data
8. Sensitivity study of temperature and strain rate dependent properties on solder joint fatigue life
9. Five-power-law creep in single phase metals and alloys10.1016/S0079-6425(99)00006-7 ↗
10. The transition from dislocation climb to viscous glide in creep of solid solution alloys10.1016/0001-6160(74)90088-1 ↗
11. The fatigue life of lead alloy E as a sheathing material for submarine power cables10.1109/61.4228 ↗
12. On the mechanism of high-temperature creep in metals with special reference to polycrystalline lead10.1088/0370-1301/69/12/301 ↗
13. Harvard · 1972
14. Low‐cycle fatigue behaviour of ductile closed‐cell aluminium alloy foams10.1111/ffe.12535 ↗
15. The creep of lead and lead alloys used for cable sheathing, a report of an investigation conducted by the engineering experiment station
16. Compressive creep properties of lead alloys10.1016/S0261-3069(99)00095-3 ↗
17. Johanson · 2018
18. Small-and full-scale fatigue testing of lead cable sheathing
19. Effect of geometrical irregularities on fatigue of lead sheathing for submarine high voltage power cable applications10.1016/j.ijfatigue.2021.106399 ↗
20. Strain controlled medium cycle fatigue of a notched Pb-Sn-Cd lead alloy10.1016/j.engfailanal.2019.05.018 ↗
21. Subsea power cable sheathing: an investigation of lead fatigue performance10.1016/j.prostr.2020.10.040 ↗
22. Tape winding angle influence on subsea cable sheathing fatigue performance10.1016/j.engstruct.2020.111660 ↗
23. Tensile and fatigue behavior of a Pb-Sn-Sb alloy investigated via small-scale in-situ mechanical testing in SEM10.1016/j.prostr.2020.10.075 ↗
24. Tensile characterization of a lead alloy: creep induced strain rate sensitivity10.1016/j.msea.2018.12.039 ↗
25. Room temperature creep mechanism of a Pb-Sn-Sb lead alloy10.1016/j.prostr.2019.08.142 ↗