journal article·2010-06

Effect of Nb, Ti and cold deformation on microstructure and mechanical properties of austenitic stainless steels

Ahmed Ismail Zaky Farahat, T.A. El-Bitar

Materials Science and Engineering: A· Volume 527· Issue 16-17
Publisher page

Abstract

Abstract It is well known that Nb and Ti are used to prevent sensitization in stainless steel. However, the amounts of Nb and Ti of standard are not enough to prevent completely this phenomenon. Therefore in this paper, several austenitic stainless steel heats were alloyed with different contents of Nb and Ti then cast in sand mould using an open air-induction melting furnace. The Nb content which used in this paper (more than standard values) is ranging from 0.004 to 0.410 wt% and Ti content is ranging from 0.007 to 1.10 wt%. The cast ingots were homogenized at 1200 °C and water quenched. The materials were austenitized at 1200 °C and then hot forged up to 85% in cross-sectional area. Solution treatment was carried out at temperatures above 1150 °C to ensure dissolution of carbides and rapid quenching to a temperature lower than the precipitation range of 875–425 °C was done. The cold rolling, welding and sensitization tests, EDS-SEM investigations, XRD pattern and corrosion resistance were carried out to study the effect of alloying elements (Nb and Ti) on sensitization behavior and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Chin · 1973 · 229
2. Lee · Scripta Mater. · 2000 · 43 · 77710.1016/S1359-6462(00)00487-5 ↗
3. Hecker · Metall. Trans. · 1982 · 13A · 61910.1007/BF02644427 ↗
4. Padilha · ISIJ Int. · 2002 · 42 · 32510.2355/isijinternational.42.325 ↗
5. 1994 · 13
6. Rivlin · Int. Met. Rev. · 1980 · 25 · 21
7. 1992
8. H.J. Eekstein, Korrosionbeständige Stähle, Deutscher Verlag für Grundstoffindustrie GmbH, Leipzig, 1990, p. 18.
9. 1973 · vol. 8
10. Bechtoldt · J. Res. Natl. Bur. Stand. · 1957 · 58 · 710.6028/jres.058.002 ↗
11. Folkhard · 1984
12. Schaeffler · Weld. J. · 1947 · 26 · 603s
13. Schaeffler · Iron Age · 1948 · 162 · 73
14. Schaeffler · Met. Prog. · 1949 · 56
15. 1972
16. DeLong · Weld. J. · 1974 · 53 · 273s
17. Hull · Weld. J. · 1973 · 52 · 193s
18. Espy · Weld. J. · 1982 · 61 · 149s
19. Schirra · Stahl Eisen · 1992 · 112 · 117
20. Allan · Ironmak. Steelmak. · 1995 · 22 · 465
21. Tuma · Arch. Eisenhüttenwes. · 1970 · 41 · 98310.1002/srin.197001688 ↗
22. Gerlach · Drahtwelt · 1970 · 56 · 25
23. Westgren · Nature · 1933 · 132 · 48010.1038/132480a0 ↗
24. Southwick · Met. Sci. · 1982 · 16 · 47510.1016/0036-9748(82)90176-4 ↗
25. Goldschmidt · J. Iron Steel Inst. · 1948 · 160 · 345
26. Philibert · Mem. Sci. Rev. Metall. · 1961 · 58 · 55710.1051/metal/196158070557 ↗
27. Da Casa · J. Iron Steel Inst. · 1969 · 207 · 1325
28. Weiss · Metall. Trans. A · 1972 · 3 · 85110.1007/BF02647659 ↗
29. Mudali · Mater. Sci. Technol. · 1999 · 15 · 145110.1179/026708399101505455 ↗
30. Deighton · J. Iron Steel Inst. · 1970 · 208 · 1012
31. Spruiell · Metall. Trans. A · 1973 · 4 · 153310.1007/BF02668005 ↗
32. Padilha · J. Nucl. Mater. · 1982 · 105 · 7710.1016/0022-3115(82)90454-8 ↗
33. Lagerquist · Scand. J. Metall. · 1972 · 1 · 81
34. Kokawa · JOM · 2000 · 52 · 3410.1007/s11837-000-0159-0 ↗
35. Grot · Metall. Trans. A · 1975 · 6 · 202310.1007/BF03161827 ↗
36. Leitnaker · Metall. Trans. A · 1977 · 8 · 160510.1007/BF02644866 ↗
37. Roelandt · 1986 · vol. 42, no. 5