Effect of cyclic loading on microstructure and plastic deformation in heat-treated Co–28Cr–6Mo alloy fabricated via laser powder bed fusion: An in situ synchrotron X-ray diffraction study
Source abstract
Abstract
We present a systematic microstructure-oriented plasticity investigation of an additively manufactured cobaltbasedalloy aiming to relate microstructural changes to the fatigue resistance. A load-controlled cyclic test inthe low-cycle fatigue regime was utilized to study mechanical response and microstructural changes in the alloyafter reverse phase transformation heat treatment. Deformation-induced FCC → HCP phase transformation wasfollowed using in situ synchrotron X-ray diffraction combined with ex situ electron backscatter diffraction andscanning electron microscopy. Scanning transmission electron microscopy provided experimental evidence of thepresence of precipitates in the solution annealed sample. It was found, that a stepwise increase in plasticdeformation is attributed to nucleation and growth of different martensitic crystallographic variants. These insightsinto plasticity and microstructural changes suggest that the reverse phase transformation heat treatment isan effective approach for improving the fatigue resistance of low stacking fault energy alloys, that are susceptibleto deformation-induced martensitic transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Metals for biomedical applications
2. Hip joint contact forces during stumbling10.1007/s00423-003-0434-y ↗
3. A fatigue assessment technique for modular and pre-stressed orthopaedic implants10.1016/j.medengphy.2013.09.009 ↗
4. Systemic and local toxicity of metal debris released from hip prostheses: a review of experimental approaches10.1016/j.nano.2018.01.001 ↗
5. Study to assess the rate of adverse reaction to metal debris in hip resurfacing at a minimum 13-year follow-up10.1016/j.arth.2020.09.056 ↗
6. What causes unexplained pain in patients with metal-on metal hip devices? A retrieval, histologic, and imaging analysis10.1007/s11999-013-3199-9 ↗
7. Tribological behavior of CoCrMo artificial knee joint with symmetrically biomimetic textured surfaces on PEEK10.1016/j.optlastec.2022.108774 ↗
8. Stephens · 2000
9. Role of strain-induced martensitic transformation on extrusion and intrusion formation during fatigue deformation of biomedical Co–Cr–Mo–N alloys10.1016/j.actamat.2014.08.039 ↗
10. Angular distortive matrices of phase transitions in the fcc–bcc–hcp system10.1016/j.actamat.2016.01.075 ↗
11. Strain-induced martensitic transformation near twin boundaries in a biomedical Co-Cr-Mo alloy with negative stacking fault energy10.1016/j.actamat.2012.11.041 ↗
12. Compressive deformation behavior and energy absorption characteristic of additively manufactured sheet CoCrMo triply periodic minimal surface lattices10.1016/j.jmrt.2022.02.086 ↗
13. A general mechanism of martensitic nucleation: Part I. General concepts and the FCC → HCP transformation
14. The size effect of initial martensite constituents on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel10.1016/j.msea.2015.02.075 ↗
15. The effect of austenite grain size on deformation mechanism of Fe–17Mn steel10.1016/j.msea.2021.140972 ↗
16. Effects of austenite grain size on ε martensitic transformation in Fe-15mass%Mn alloy10.2320/matertrans1989.34.489 ↗
17. Fatigue improvement of electron beam melting-fabricated biomedical Co–Cr–Mo alloy by accessible heat treatment10.1080/21663831.2017.1396506 ↗
18. Isothermal γ → ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing10.1016/j.jmst.2019.11.040 ↗
19. Kinetics of FCC to HCP transformation during aging heat treatment of Co–28Cr–6Mo alloy fabricated by laser-powder bed fusion10.1007/s11661-023-07016-w ↗
20. Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests10.1016/j.actamat.2018.10.035 ↗
21. Room-temperature deformation and martensitic transformation of two Co-Cr-based alloys10.1007/s11661-018-4636-x ↗
22. Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: influence of the martensite fraction and role of inclusions10.1016/j.matchar.2022.111903 ↗
23. Deformation processes of additively manufactured interstitial-strengthened high entropy alloy: in-situ high-energy synchrotron X-ray diffraction and microstructural appraisal
24. In situ synchrotron X-ray diffraction investigations of the nonlinear deformation behavior of a low modulus β-type Ti36Nb5Zr alloy10.3390/met10121619 ↗
25. Synchrotron diffraction characterization of dislocation density in additively manufactured IN 718 superalloy10.1016/j.matchar.2021.111379 ↗
26. Dislocation density evolution of AA 7020-T6 investigated by in-situ synchrotron diffraction under tensile load10.1016/j.matchar.2015.09.004 ↗
27. Estimation of dislocation density in cold-rolled commercially pure titanium by using synchrotron diffraction10.1007/s11663-014-0066-3 ↗
28. Rietveld texture analysis from synchrotron diffraction images. I. Calibration and basic analysis10.1017/S0885715613001346 ↗
29. Generalized pole figures from post-processing whole Debye–Scherrer patterns for microstructural analysis on deformed materials10.1107/S160057752200220X ↗
30. Texture analysis from synchrotron diffraction images with the Rietveld method: dinosaur tendon and salmon scale10.1107/S090904950500138X ↗
31. Fatigue behavior of biomedical Co–Cr–Mo–W alloy fabricated by selective laser melting10.1016/j.msea.2020.140000 ↗
32. 2011
33. 2013 · 1
34. The high energy materials science beamline (HEMS) at PETRA III10.4028/www.scientific.net/MSF.772.57 ↗
35. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
36. Quantitative texture analysis by Rietveld refinement10.1107/S0021889897005918 ↗
37. LaboTex: the texture analysis software
38. Texture analysis with MTEX- Free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
39. Analysis of the γ–ɛ–α′ variant selection induced by 10% plastic deformation in 304 stainless steel at −60°C10.1016/j.msea.2006.11.112 ↗
40. Lattice parameters of austenite and martensite during transformation for Fe–18Ni alloy investigated through in-situ neutron diffraction10.1016/j.actamat.2023.118860 ↗
41. Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting10.1016/j.msea.2018.04.048 ↗
42. Grain refinement of biomedical Co–27Cr–5Mo–0.16N alloy by reverse transformation10.1016/j.matlet.2009.10.001 ↗
43. Recrystallization behavior of selective laser melted Co–Cr–Mo alloys with several heat treatment times10.1016/j.msea.2022.143998 ↗
44. Grain refinement of Co-Cr-Mo-C through plastic deformation followed by reversion of lamellar eutectoid structure10.1007/s11665-018-3787-7 ↗
45. On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting
46. Grain refinement by pearlitic-type constituents in Co–28Cr–5Mo–0.3C alloy10.1016/j.matlet.2012.11.074 ↗
47. The effect of cyclic solution heat treatment on the martensitic phase transformation and grain refinement of Co-Cr-Mo dental alloy10.3390/met10070861 ↗
48. Effect of stacking fault energy on recrystallization in cold worked FCC crystals10.2320/matertrans1960.25.339 ↗
49. Heat treatment of laser powder-bed-fused Co–28Cr–6Mo alloy to remove its microstructural instability by massive FCC→HCP transformation
50. Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co–Cr–Mo alloys produced by selective laser melting10.1016/j.jmbbm.2019.103496 ↗
51. Effect of multiple reverse transformation treatments on grain refinement and mechanical properties of biomedical Co–Cr–Mo–N alloys fabricated by electron beam melting10.3390/ma16196528 ↗
52. An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting10.1016/j.jallcom.2018.04.054 ↗
53. In-situ investigation of strain-induced martensitic transformation kinetics in an austenitic stainless steel by inductive measurements10.3390/met7070271 ↗
54. Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel10.1016/j.scriptamat.2006.10.009 ↗
55. Spontaneous and deformation‐induced martensite in austenitic stainless steels with different stability10.1002/srin.201000118 ↗
56. Plastic strain-induced sequential martensitic transformation10.1016/j.scriptamat.2020.03.060 ↗
57. Plastic deformation mechanisms of biomedical Co–Cr–Mo alloy single crystals with hexagonal close-packed structure10.1016/j.scriptamat.2017.08.016 ↗
58. Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion10.1080/17452759.2023.2219665 ↗
59. Strengthening of biomedical Ni-free Co–Cr–Mo alloy by multipass “low-strain-per-pass” thermomechanical processing10.1016/j.actbio.2015.09.016 ↗
60. Microstructures and mechanical properties of biomedical Co-29Cr-6Mo-0.14N alloys processed by hot rolling10.1007/s11661-012-1156-y ↗
61. Transformation-reinforced high-entropy alloys with superior mechanical properties via tailoring stacking fault energy10.1016/j.jallcom.2019.04.035 ↗
62. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
63. Ultrastrong Mg alloy via nano-spaced stacking faults10.1080/21663831.2013.765927 ↗
64. Physics and model of strengthening by parallel stacking faults10.1063/1.4822323 ↗
65. Stacking-fault strengthening of biomedical Co–Cr–Mo alloy via multipass thermomechanical processing10.1038/s41598-017-10305-1 ↗
66. Stacking faults and twin boundaries in fcc crystals determined by x-ray diffraction profile analysis10.1063/1.2216195 ↗
67. Tuning strain-induced γ-to-ε martensitic transformation of biomedical Co–Cr–Mo alloys by introducing parent phase lattice defects10.1016/j.jmbbm.2018.10.038 ↗
68. Deformation-induced martensitic transformation in Co-28Cr-6Mo alloy produced by laser powder bed fusion: Comparison surface vs. bulk
69. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
70. The effect of dislocation contrast on X-ray line profiles in untextured polycrystals10.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
71. Correlation between subgrains and coherently scattering domains10.1154/1.2135313 ↗
72. A general mechanism of martensitic nucleation: Part II. FCC → BCC and other martensitic transformations
73. In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy10.1016/j.actamat.2018.01.036 ↗
74. Local strain evolution due to athermal γ→ ε martensitic transformation in biomedical CoCrMo alloys10.1016/j.jmbbm.2013.12.019 ↗
75. Origin of significant grain refinement in Co-Cr-Mo alloys without severe plastic deformation10.1007/s11661-012-1303-5 ↗
76. Effect of cyclic loading on microstructure and crack propagation in additively manufactured biomaterial Co–Cr–Mo alloy10.1016/j.jmrt.2023.08.185 ↗
77. Orientation dependence of variant selection and intersection reactions of ϵ martensite in a high-manganese austenitic steel10.1080/09500839.2011.596492 ↗
78. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
79. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
80. Thermal analysis and phase transformation behaviour during additive manufacturing of Ti–6Al–4V alloy10.1080/02670836.2019.1593669 ↗
81. Textures formed in a CoCrMo alloy by selective laser melting10.1016/j.jallcom.2015.01.096 ↗
82. Evolution of recrystallization texture in medium to low stacking fault energy alloys: experiments and simulations10.1016/j.ijplas.2023.103827 ↗
83. Solute-induced near-isotropic performance of laser powder bed fusion manufactured pure titanium
84. A model for the formation of annealing twins in F.C.C. metals and alloys10.1016/0001-6160(78)90046-9 ↗