Mechanism based mean-field modeling of the work-hardening behavior of dual-phase steels
Source abstract
Abstract
Abstract Low-alloyed dual-phase (DP) steels exhibit good mechanical properties due to their composite-like microstructure of strong martensitic inclusions embedded in a ductile ferritic-matrix. This work presents an efficient two-scale approach to model the work-hardening of DP steels based on physically-motivated work-hardening contributions from geometrically necessary dislocations. The resulting mean-field model of Hashin-Shtrikman type comprises a minimal amount of free parameters and incorporates two main physical aspects motivated from presented experimental data: First, the constitutive equations for ferrite incorporate the averaged microstructural morphology (obtained by electronic backscatter diffraction) in terms of grain size and martensite coverage. Second, a direct interaction between ferrite and martensite phases is achieved via kinematic-hardening which models the long-range stresses experimentally observed in tensile tests of the bulk material. The presented approach is able to both reproduce the measured DP600 tensile curve and predict the distinctly different work-hardening rates observed for high-strength DP steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Advanced cold rolled steels for automotive applications
2. The effect of martensite particle size on tensile fracture of surface-carburised AISI 8620 steel with dual phase core microstructure10.1016/S0261-3069(02)00065-1 ↗
3. Work hardening of dual-phase steels10.1179/030634581790426615 ↗
4. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
5. Micromechanical analysis of martensite distribution on strain localization in dual phase steels by scanning electron microscopy and crystal plasticity simulation10.1016/j.msea.2016.05.094 ↗
6. Dislocation substructure as a function of strain in a dual-phase steel10.1007/BF02644716 ↗
7. J. Liao, J.A. Sousa, A.B. Lopes, X. Xue, F. Barlat, A.B. Pereira, Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths, International Journal of Plasticity.
8. Microstructure evolution and mechanical behavior of a high strength dual-phase steel under monotonic loading10.1016/j.matchar.2014.11.031 ↗
9. Influence of plastic deformation heterogeneity on development of geometrically necessary dislocation density in dual phase steel10.1016/j.msea.2016.05.022 ↗
10. Microstructure and mechanical property relationship in an ultrahigh strength 980MPa grade high-Al low-Si dual phase steel10.1016/j.msea.2015.08.016 ↗
11. Tensile properties and inhomogeneous deformation of ferrite-martensite dual-phase steels10.1007/BF00354695 ↗
12. Effect of martensite plasticity on the deformation behavior of a low-carbon dual-phase steel10.1007/s11661-006-9023-3 ↗
13. Influence of martensite distribution on the mechanical properties of dual phase steels: experiments and simulation
14. Quantitative measurement of strain partitioning and slip systems in a dual-phase steel10.1016/j.scriptamat.2013.03.021 ↗
15. EBSD study of the substructure development with cold deformation of dual phase steel10.1016/j.msea.2009.09.009 ↗
16. Correlation between the macroscopic behavior and the microstructural evolutions during large plastic deformation of a dual-phase steel10.1007/s11661-005-0067-6 ↗
17. Structure-property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model10.1016/j.actamat.2006.11.029 ↗
18. Modelling the plastic behaviour of metals under complex loading conditions10.1088/0965-0393/19/3/035009 ↗
19. The work-hardening of copper-silica10.1080/14786437108217406 ↗
20. Dual role of deformation-induced geometrically necessary dislocations with respect to lattice plane misorientations and/or long-range internal stresses10.1016/j.actamat.2006.03.047 ↗
21. H. Seyedrezai, Thermo-Mechanical Processing of Dual-Phase Steels and Its Effects on the Work Hardening Behaviour, (Thesis) Queens University, Kingston, Ontario, Canada, 〈http://hdl.handle.net/1974/12677〉
22. Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels10.1016/j.msea.2012.01.092 ↗
23. Constitutive equations for cyclic plasticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
24. An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel10.1016/j.euromechsol.2008.12.004 ↗
25. Work-hardening behavior of mild steel under stress reversal at large strains10.1016/0749-6419(92)90006-X ↗
26. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification10.1016/j.ijplas.2006.03.010 ↗
27. A new relationship between the flow stress and the microstructural parameters for dual phase steel10.1016/0956-7151(92)90101-J ↗
28. Effects of microstructural variables on the deformation behaviour of dual-phase steel10.1016/0921-5093(94)09594-M ↗
29. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
30. A model for the grain size dependent work hardening of copper10.1016/j.scriptamat.2006.05.018 ↗
31. Dislocation-based model for the prediction of the behavior of bcc materials - grain size and strain path effects10.1016/j.ijplas.2013.01.003 ↗
32. Microscale-calibrated modeling of the deformation response of dual-phase steels10.1016/j.actamat.2013.11.036 ↗
33. D. Gross, T. Seelig, Fracture Mechanics, 2nd Edition.
34. Bounds and self-consistent estimates for the overall properties of anisotropic composites10.1016/0022-5096(77)90022-9 ↗
35. Two-scale modeling of grain size and phase transformation effects10.1002/srin.201300200 ↗
36. Microstructure based prediction and homogenization of the strain hardening behavior of dual-phase steel
37. Prediction of texture evolution in rolled sheet metals by using homogenization schemes10.4028/www.scientific.net/KEM.504-506.649 ↗
38. K. Jöchen, Homogenization of the Linear and Non-linear Mechanical Behavior of Polycrystals.
39. Nonlinear composites
40. On optimal zeroth-order bounds with application to Hashin-Shtrikman bounds and anisotropy parameters10.1016/S0020-7683(00)00393-0 ↗
41. Variational treatment of the elastic constants of disordered materials10.1007/BF01392841 ↗
42. V. Glavas, Personal communication within the DFG Research Training Group 1483, Institute for Engineering Mechanics – Chair for Continuum Mechanics (ITM).
43. W. Gambin, Plasticity and Textures, 1st Edition.
44. Constitutive modeling and finite element methods for TRIP steels10.1016/j.cma.2005.09.026 ↗
45. Elastic constants and internal friction of martensitic steel, ferritic-pearlitic steel, and α-iron10.1016/j.msea.2006.11.147 ↗
46. Stress and strain partitioning of ferrite and martensite during deformation10.1007/s11661-009-9824-2 ↗
47. A dislocation-based hardening model incorporated into an anisotropic hardening approach10.1016/j.commatsci.2013.05.056 ↗
48. A mathematical representation of the multiaxial Bauschinger effect10.3184/096034007X207589 ↗
49. Grain size dependence of the strength of metals: the Hall-Petch effect does not scale as the inverse square root of grain size10.1016/j.ijplas.2013.07.004 ↗
50. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
51. Dislocation-density-related constitutive modeling
52. Revisited storage and dynamic recovery of dislocation density evolution law: toward a generalized Kocks-Mecking model of strain-hardening10.1002/adem.201200083 ↗
53. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
54. On the strength of grain and phase boundaries in ferritic-martensitic dual-phase steels
55. Structure-property relationships in dual-phase steels10.1179/030634582790427433 ↗
56. Physical modelling of microstructure and mechanical properties of dual-phase steel
57. On the role of strain gradients and long-range internal stresses in the composite model of crystal plasticity10.1016/S0921-5093(01)01173-X ↗
58. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗
59. Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels10.1007/s11661-998-0328-2 ↗
60. The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension10.1016/j.ijplas.2012.11.013 ↗
61. Phase analysis on dual-phase steel using band slope of electron backscatter diffraction pattern10.1017/S1431927613012233 ↗
62. Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels10.1016/j.ijplas.2012.11.003 ↗
63. S. Schreijäg, Microstructure and mechanical behavior of deep drawing DC04 steel at different length scales.
64. R. Sebastiano, Experimentelle und numerische Untersuchung von Dualphasenstahl unter biaxialer Belastung, (B.Sc. thesis) Karlsruhe Institute of Technology, Institute for Engineering Mechanics – Chair for Continuum Mechanics.
65. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels10.1007/s11661-999-0269-4 ↗
66. Microstructure and properties of Mo Microalloyed cold rolled DP1000 steels10.1016/S1006-706X(11)60065-4 ↗
67. The impact of thermo-mechanical controlled processing on structure-property relationship and strain hardening behavior in dual-phase steels10.1016/j.msea.2016.03.055 ↗
68. The work hardening of dual-phase steels at small plastic strains10.1016/0025-5416(84)90138-1 ↗
69. Measurements of anisotropic yielding, Bauschinger and transient behavior of automotive dual-phase steel sheets10.1007/BF03027256 ↗
70. Bauschinger effect and residual phase stresses in two ductile-phase steels: Part II. The effect of microstructure and mechanical properties of the constituent phases on10.1007/BF02671943 ↗
71. Effect of strain and strain rate on the bauschinger effect response of three different steels10.1007/s11661-005-0110-7 ↗
72. Microscopic deformation behaviour of martensitic-ferritic dual-phase steels10.1179/mst.1986.2.1.28 ↗
73. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel10.1016/j.msea.2014.02.058 ↗
74. A dislocation-based theory for the deformation hardening behavior of DP steels10.1155/2010/647198 ↗
75. Microstructure and tensile properties of high strength duplex ferrite-martensite (DFM) steels10.1016/j.msea.2007.02.042 ↗