journal article·2018-01

Microstructural evolution of adiabatic shear bands in pure copper during impact at high strain rates

Solomon Boakye-Yiadom, Nabil Bassim

Publisher page

Abstract

Abstract A systematic study was conducted on copper of commercial purity (99.9% purity) to elucidate the sequence of events that leads to the evolution of adiabatic shear bands and the structure of the evolved shear bands after strain localization during deformation at high strain rates and large strains. A direct impact Hopkinson Pressure Bar was used to deform different specimens at increasing impact momentum and strain rate followed by microstructural characterization using metallographic techniques and transmission electron microscopy. It was observed that sequential occurrence of emergence of dislocations from grain and twin boundaries, formation of dislocation cell structures and substructures with varying cell sizes and cell walls, dislocation-nucleation controlled softening and extensive micro twinning characterized the structure of the evolved adiabatic shear bands as a function of impact momentum and strain rate. The dislocation cell structures and substructures were typically made up of high-density dislocation walls surrounding low-density dislocation cell interiors. The microhardness distribution within the evolved shear bands increased up to a peak value at a critical impact momentum and strain rate (≥ 45 kg m/s and ≥6827 s−1). Above this threshold, microhardness of the regions within the evolved shear bands decreased because of the occurrence of softening. However, the first specimen that exhibited softening had high-density dislocation cell walls surrounding dislocation-free cell interiors with no observed recrystallized grains. Despite the onset of softening both within and outside the shear bands, the regions within the shear bands were always harder than the regions outside the shear bands. The shear bands that exhibited significant softening were clad with vast distribution of microtwins in addition to evolved refined grains and sub-grains. It is discussed that thermally activated dislocation processes as a result of the rise in temperature during impact, dynamic recovery and dynamic recrystallization do not necessarily result in strain localization in the impacted copper specimens because their effects are observed in the structure of the evolved shear bands at a latter stage when strain localization had already occurred.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Dodd · 2012
2. Microstructural evolution in adiabatic shear bands of copper at high strain rates: electron backscatter diffraction characterization10.1016/j.matchar.2011.11.011 ↗
3. Deformation mapping and the role of carbides on the microstructure and properties of evolved ASBs10.1007/s11661-014-2495-7 ↗
4. Effect of heat treatment on stability of impact-induced adiabatic shear bands in 4340 steel10.1016/j.msea.2012.03.057 ↗
5. Adiabatic shear bands and examples of their role in severe plastic deformation10.1023/A:1016541023502 ↗
6. Murr · 1975
7. Effect of microstructure on the nucleation and initiation of adiabatic shear bands during impact10.1016/j.msea.2014.07.095 ↗
8. A systematic study of grain refinement during impact of 4340 steel10.1016/j.msea.2014.03.066 ↗
9. High-strain-rate deformation: mechanical behavior and deformation substructures induced10.1146/annurev-matsci-070511-155034 ↗
10. Boakye-Yiadom · 2014
11. The propagation of adiabatic shear
12. Shear strain localization and fracture in high strength structural materials
13. Effect of heat treatment on adiabatic shear bands in high strength low alloy steel10.1016/j.msea.2005.11.059 ↗
14. Microstructure and mechanical properties at different length scales and strain rates of nanocrystalline tantalum produced by high-pressure torsion10.1016/j.actamat.2010.12.042 ↗
15. Nanocrystalline refractory metals for extreme condition application
16. On the formation of adiabatic shear bands in textured HCP polycrystals10.1016/j.ijplas.2015.12.004 ↗
17. Observation of an adiabatic shear band in AISI 4340 steel by high-voltage transmission electron microscopy10.1007/BF02671941 ↗
18. A different viewpoint on adiabatic shear localization
19. Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6al4v alloys10.1016/j.mechmat.2008.03.002 ↗
20. Recrystallization kinetics within adiabatic shear bands10.1016/S1359-6454(96)00193-0 ↗
21. A model for microstructural evolution in adiabatic shear bands10.1007/s11661-998-0172-4 ↗
22. A microstructural investigation of adiabatic shear bands in an interstitial free steel10.1016/j.msea.2006.12.019 ↗
23. Adiabatic shear bands in impact wear
24. The mechanical response of pure iron at high strain rates under dominant shear10.1016/j.msea.2006.05.154 ↗
25. Dynamic recrystallization and grain size effects in shock- hardened copper
26. dynamic recrystallization in adiabatic shear bands in shock-loaded copper
27. The effect of grain size on the high-strain, high-strain-rate behavior of copper10.1007/BF02669646 ↗
28. The formation of adiabatic shear bands in copper during torsion at high strain rates10.1016/j.proeng.2009.06.053 ↗
29. S. Boakye-Yiadom, M.N. Bassim, S. Al-Ameeri, On the persistence of adiabatic shear bands, 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, EPJ Web of Conferences 26, 2012, pp. 1–4. 〈http://dx.doi.org/10.1051/epjconf/20122602002〉.10.1051/epjconf/20122602002 ↗
30. Observations of adiabatic shear band formation in 7039 aluminum alloy10.1007/BF02670378 ↗
31. Adiabatic shearing localisation in high strain rate deformation of Al-Sc alloy10.2320/matertrans.M2010053 ↗
32. Microscopical study of the formation of adiabatic shear bands in 4340 steel during dynamic loading10.1080/14786435.2013.837587 ↗
33. Shear localization in dynamic deformation: microstructural evolution10.1007/s11661-007-9431-z ↗
34. Dislocation nucleation governed softening and maximum strength in nano-twinned metals10.1038/nature08929 ↗
35. Dislocation cell formation in metals10.1063/1.1659399 ↗
36. Dislocation cell formation during plastic deformation of copper single crystals10.1002/pssa.2210570234 ↗
37. Fatigue in copper single crystals and a new model of fatigue in face-centered cubic metals10.1139/p67-065 ↗
38. Theory of workhardening 1934–198410.1007/BF02670414 ↗
39. X-ray microbeam measurements of individual dislocation cell elastic strains in deformed single-crystal copper10.1038/nmat1698 ↗
40. Extreme extensibility of copper foil under compound forming conditions
41. Deformation twinning in polycrystalline copper at room temperature and low strain rate10.1016/j.actamat.2005.10.002 ↗
42. Low-temperature deformation of copper single crystals10.1063/1.1722824 ↗
43. Effect of residual strain on the substructure development and mechanical response of shock loaded copper10.1016/0921-5093(89)90192-5 ↗
44. Twinning in copper deformed at high strain rates10.1007/s12034-013-0445-4 ↗
45. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
46. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
47. New observations on the mechanisms of dynamic strain aging and of jerky flow10.1016/0001-6160(79)90130-5 ↗
48. Gray · 1991 · 17