journal article·2001-01

Copper alloy–stainless steel bonded laminates for fusion reactor applications: crack growth and fatigue

K.D Leedy, J.F Stubbins

Materials Science and Engineering: A· Volume 297· Issue 1-2
Publisher page

Abstract

Abstract Fatigue and crack growth in copper alloy–stainless steel bi-layer panels joined by hot isostatic pressing or explosive bonding were tested over the temperature range 25–225°C. Several material combinations under consideration for fusion reactor first wall applications were studied: solid plates of precipitation strengthened CuNiBe or dispersion strengthened CuAl 2 O 3 bonded to a 316L stainless steel plate and Cu–Al 2 O 3 in a powder form consolidated and bonded concurrently to a 316L stainless steel plate. Fatigue and crack growth were measured perpendicular to the interface through the copper alloy. Crack growth was also measured parallel to the interface along the bond line. The solid Cu–Al 2 O 3 –stainless steel laminate exhibited the best perpendicular crack growth resistance and fatigue performance of the bonded panels due primarily to the elongated Cu–Al 2 O 3 grains oriented perpendicular to the crack propagation direction. Before reaching the interface cracks propagating perpendicular to the interface caused delamination in most panels near the copper alloy–stainless steel bond line within the copper alloy. All bi-layer panels displayed minimal resistance to parallel crack growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Tavassoli · J. Nucl. Mater. · 1998 · 258–263 · 8510.1016/S0022-3115(98)00080-4 ↗
2. LeMarois · Fusion Eng. Des. · 1998 · 39–40 · 25310.1016/S0920-3796(98)00108-2 ↗
3. D.J. Edwards, PhD Thesis, University of Missouri-Rolla, 1993.
4. J.W. Davis, ITER Material Properties Handbook, ITER Doc. S74RE197-08-OIWI.6, International Atomic Energy Agency, 1997.
5. Beer · 1981 · 168
6. K.D. Leedy, J.F. Stubbins, Mater. Sci. Eng. A (2000) (submitted).
7. LeMarois · J. Nucl. Mater. · 1996 · 233–237 · 92710.1016/S0022-3115(96)00138-9 ↗
8. Nishi · J. Nucl. Mater. · 1994 · 212–215 · 158510.1016/0022-3115(94)91094-4 ↗
9. Sato · J. Nucl. Mater. · 1996 · 233–237 · 94010.1016/S0022-3115(96)00259-0 ↗
10. Murray · ASTM STP · 1994 · 1184 · 109
11. Hatano · J. Nucl. Mater. · 1998 · 258–263 · 95010.1016/S0022-3115(98)00122-6 ↗
12. Leedy · Mater. Sci. Eng. A · 2001 · 297 · 1010.1016/S0921-5093(00)01273-9 ↗