Site-specific quasi in situ investigation of primary static recrystallization in a low carbon steel
Source abstract
Abstract
Low-alloyed steels with body-centered cubic crystal structure are a material class that is widely used for sheet metal forming applications. When having an adequate crystallographic texture and microstructure, their mechanical behavior is characterized by an isotropic in-plane flow behavior in combination with a low yield strength. The decisive processing steps for obtaining these beneficial mechanical properties are cold rolling and subsequent annealing. While for the former the number of passes, the deformation rates, and the total thickness reduction are the main processing parameters, the latter is described mainly by the heating rate and the holding temperature and time. Primary static recrystallization during annealing subsequent to the cold rolling process alters mainly two aspects of the material state: It firstly replaces the elongated and heavily deformed grains of the cold rolled microstructure by small, globular grains with low dislocation density and secondly it changes the crystallographic texture insofar as it typically diminishes the α- and strengthens the γ-fiber texture components. In the present work, the recrystallization behavior of a commercial non-alloyed low carbon steel is studied. A quasi in situ setup that enables site-specific characterization is employed to gain a local picture of the nucleation and recrystallization process. From the Kernel Average Misorientation (KAM) values of the deformation structure, the tendency to be consumed by new grains can be predicted. Crystallographic analysis shows that the most deformed regions have either a γ-fiber orientation or belong to heavily fragmented regions. New grains nucleate especially in such highly deformed regions and inherit often the orientation from the deformation microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Texture analysis with MTEX - free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
2. Evaluation of annealing texture in IF and EDD steel sheets10.1080/10426910701233236 ↗
3. Role of in-grain shear bands in the nucleation of 111 ∥ ND recrystallization textures in warm rolled steel10.2355/isijinternational.38.78 ↗
4. Influence of ferrite rolling temperature on grain size and texture in annealed low C and IF steels10.2355/isijinternational.37.706 ↗
5. Formation of {111}<110> and {111}<112> textures in cold rolled and annealed IF sheet steel10.2355/isijinternational.39.923 ↗
6. Doege · 2010
7. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
8. Retention of the Goss orientation between microbands during cold rolling of an Fe3%Si single crystal10.1016/j.actamat.2006.11.048 ↗
9. Analysis of local orientation gradients in deformed single crystals10.1016/j.ultramic.2004.11.016 ↗
10. Influence of the microalloying elements on the temporary inhibition of static recrystallization by strain-induced precipitates10.1002/srin.201300356 ↗
11. Grain boundary junction engineering10.1016/j.scriptamat.2005.11.057 ↗
12. Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization10.1016/j.jmatprotec.2008.08.007 ↗
13. Rolling and recrystallization textures of bcc steels10.1002/srin.199100451 ↗
14. Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy10.1016/S1359-6454(99)00062-2 ↗
15. Combined in-situ annealing and EBSD of deformed aluminium alloys10.4028/www.scientific.net/MSF.217-222.529 ↗
16. A study of recrystallization in single-phase aluminium using in-situ annealing in the scanning electron microscope10.1111/j.0022-2720.2004.01300.x ↗
17. Deformation microstructures and textures in steels10.1098/rsta.1999.0385 ↗
18. Development and control of annealing textures in low-carbon steels10.1179/imtr.1984.29.1.25 ↗
19. Practical aspects of texture control in low carbon steels10.4028/www.scientific.net/MSF.157-162.1917 ↗
20. Fundamental aspect of texture formation in low carbon steel10.2355/isijinternational.34.313 ↗
21. Quasi in-situ analysis of geometrically necessary dislocation density in α-fibre and γ-fibre during static recrystallization in cold-rolled low-carbon Ti-V bearing microalloyed steel10.1016/j.matchar.2018.09.032 ↗
22. Texture formation in metal alloys with cubic crystal structures10.1080/02670836.2016.1231746 ↗
23. Investigation of recrystallization mechanisms in steels during in situ annealing in a SEM10.1016/S1359-6462(96)00434-4 ↗
24. Advanced methods and tools for reconstruction and analysis of grain boundaries from 3D-EBSD data sets10.4028/www.scientific.net/MSF.702-703.475 ↗
25. Effects of carbides on the microstructural evolution in sub-micron grain 9310 steel during isothermal heat treatment10.1007/s11661-015-2884-6 ↗
26. Grain boundary mobilities during recrystallization of Al-Mn alloys as measured by in situ annealing experiments10.1016/j.msea.2005.05.010 ↗
27. Development of recrystallization textures in ferritic stainless steels and their relationship to formability10.1179/030716983803291811 ↗
28. Five decades of the zener equation10.2355/isijinternational.38.913 ↗
29. Effect of cold rolling level on recrystallization textures in low carbon steel sheets - modelling10.4028/www.scientific.net/MSF.273-275.433 ↗
30. Use of Kolmogorov-Johnson-Mehl-Avrami kinetics in recrystallization of metals and crystallization of metallic glasses10.1016/0956-7151(90)90024-B ↗
31. On the influence of the chromium content on the evolution of rolling textures in ferritic stainless steels10.1007/BF00352800 ↗
32. Annealing textures of BCC metals10.1016/0956-716X(92)90140-A ↗
33. Rolling and annealing textures of BCC metals10.4028/www.scientific.net/MSF.157-162.597 ↗
34. Cold rolling and annealing textures in low carbon and extra low carbon steels10.1179/imr.1994.39.4.129 ↗
35. Transformation kinetics for inhomogeneous nucleation10.1016/j.actamat.2008.11.003 ↗
36. γ-Fibre recrystallization texture in IF-steel: an investigation on the recrystallization mechanisms10.1016/S0921-5093(97)00455-3 ↗
37. Development of recrystallization texture in IF-steel: an effort to explain developments in global texture from microtextural studies10.1016/S1359-6454(97)00466-7 ↗
38. Transformation kinetics for nucleus clusters10.1016/j.actamat.2009.04.014 ↗
39. Three-dimensional orientation microscopy in a focused ion beam-scanning electron microscope: a new dimension of microstructure characterization10.1007/s11661-007-9418-9 ↗
40. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
41. Multi-probe microstructure tracking during heat treatment without an in-situ setup: case studies on martensitic steel, dual phase steel and β-Ti alloy10.1016/j.matchar.2015.11.019 ↗