journal article·2010-10

Mutual dependency of mechanical properties and contiguity in W–Cu composites

M. Amirjan, N. Parvin, K. Zangeneh-Madar

Materials Science and Engineering: A· Volume 527· Issue 26
Publisher page

Abstract

Abstract The solid–solid and solid–liquid interfaces and their relationship to mechanical properties have been investigated in tungsten powder compacts infiltrated with copper. The application of Ni, Ni–Cu and Ni–Cu–P electroless coatings on primary W powders, prior to compaction was found to affect the contiguity and hence improve the yield and compressive strength of specimens. Scanning electron microscopy, X-ray diffraction analyses and mechanical properties were investigated with due allowance for the participation of contiguity in microstructure. Comparison of the observed data was made with those of conventional elementally mixed compacts. It was illustrated that the application of thin elemental or complex coating has a direct influence on the contiguity and mechanical properties. It was found that W powder coated with Ni–Cu–P coating exhibited the lowest contiguity, and highest relative density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Yoo · Mater. Sci. Technol. · 1998 · 14 · 17010.1179/mst.1998.14.2.170 ↗
2. Sebastian · Int. J. Powder Metall. Powder Technol. · 1981 · 17 · 297
3. Mordike · Powder Metall. Int. · 1991 · 23 · 91
4. Evaluation of conductivity in W–Cu composites through the estimation of topological microstructures10.1016/j.matlet.2005.12.113 ↗
5. German · Int. J. Powder Metall. · 1994 · 30 · 205
6. Massalski · 1990
7. Kingery · J. Appl. Phys. · 1959 · 30 · 30110.1063/1.1735155 ↗
8. Huppmann · Powder Metall. · 1976 · 19 · 249
9. Moon · Powder Metall. · 1979 · 22 · 510.1179/pom.1979.22.1.5 ↗
10. Sebastian · Int. J. Powder Metall. · 1981 · 17 · 297
11. Mordike · Powder Metall. Int. · 1991 · 23 · 91
12. Hiraoka · Int. J. Ref. Metals Hard Mater. · 2004 · 22 · 8710.1016/j.ijrmhm.2004.01.002 ↗
13. Islam · Int. J. Ref. Metals Hard Mater. · 2007 · 22 · 380
14. Fan · Acta Metall. Mater. · 1994 · 43 · 4310.1016/0956-7151(94)00217-6 ↗
15. Koh · Int. J. Heat Mass Transfer · 1973 · 16 · 201310.1016/0017-9310(73)90104-X ↗
16. Scorey, US Patent 5,912,399.
17. Zangeneh-Madar · Surf. Coat. Technol. · 2009 · 203 · 233310.1016/j.surfcoat.2009.02.055 ↗
18. German · J. Mater. Sci. · 2009 · 44 · 110.1007/s10853-008-3008-0 ↗
19. Amirjan · Int. J. Ref. Metals Hard Mater. · 2009 · 27 · 72910.1016/j.ijrmhm.2008.12.008 ↗
20. Dore · Scri. Mater. · 2003 · 49 · 23710.1016/S1359-6462(03)00244-6 ↗
21. German · 1996
22. Upadhyaya · Sintered Metall. Ceram. Mater. · 1995
23. Fine Grain Tungsten heavy alloys Containing additives, United State Patent, 1991, No 4.
24. Johnson · Met. Mater. Trans. A · 1996 · 27B
25. S. Farooq, Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1988.
26. Dieter · 1986
27. Korthaüer · Theoret. Appl. Fracture Mech. · 2006 · 46 · 3810.1016/j.tafmec.2006.05.002 ↗
28. German · 1985