Microstructure and mechanical properties of Si3N4/Si3N4 joint brazed with Ag–Cu–Ti+SiCp composite filler
Source abstract
Abstract
Abstract Ag–Cu–Ti + SiCp composite filler was used as brazing material to join Si 3 N 4 ceramic. Effects of the content of Ti (4–10 wt.%) and SiC particles (0–15 vol.%) on properties and microstructure of the joints were investigated. A reliable Si 3 N 4 /Si 3 N 4 joint was achieved by using Ag–Cu–Ti + SiCp composite filler brazed at 1173 K for 10 min. A continuous and compact reaction layer with suitable thickness was formed at the Si 3 N 4 /braze interface. The SiC particles reacted with Ti in the brazing layers, forming Ti 3 SiC 2 thin layers around the SiC particles and Ti–Si phases. However, when the Si 3 N 4 /Si 3 N 4 joints were brazed by the filler with the aptotic content of Ti, higher content of SiC particles (≥10 vol.%) in the filler decreased interfacial bonding strength due to bad fluidity of the filler and insufficient reaction between the Ti element and the Si 3 N 4 substrates. The Ti 3 SiC 2 → TiC + Ti–Si reaction occurred when Ti concentration was higher around SiC particles in the filler. The highest average three-point bending strength of 506.3 MPa was retained when x was 8 wt.% for Si 3 N 4 /Si 3 N 4 joints brazed with (Ag 72 Cu 28 ) 100− x Ti x + 5 vol.% SiCp composite filler.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Blugan · Acta Mater. · 2004 · 52 · 457910.1016/j.actamat.2004.06.016 ↗
2. He · Mater. Sci. Eng. A · 2006 · 418 · 4510.1016/j.msea.2005.11.005 ↗
3. Blugan · Ceram. Int. · 2007 · 33 · 103310.1016/j.ceramint.2006.03.010 ↗
4. Zhang · J. Eur. Ceram. Soc. · 2002 · 22 · 218110.1016/S0955-2219(02)00011-0 ↗
5. Ding · Mater. Sci. Eng. A · 2006 · 430 · 30110.1016/j.msea.2006.05.057 ↗
6. Liu · Mater. Sci. Eng. A · 2006 · 415 · 21310.1016/j.msea.2005.09.096 ↗
7. Park · Scripta Mater. · 2004 · 50 · 55510.1016/j.scriptamat.2003.09.055 ↗
8. Park · Acta Mater. · 2002 · 50 · 88310.1016/S1359-6454(01)00352-4 ↗
9. Lin · J. Mater. Process. Technol. · 2007 · 189 · 25610.1016/j.jmatprotec.2007.01.031 ↗
10. Klotz · 2002 · 142
11. Wielage · 2007
12. Weis · 2008
13. Zhu · J. Am. Ceram. Soc. · 1994 · 77 · 271210.1111/j.1151-2916.1994.tb04666.x ↗
14. Zhu · J. Mater. Sci. · 1997 · 32 · 532110.1023/A:1018666827969 ↗
15. Liu · Mater. Sci. Eng. A · 2008 · 491 · 48310.1016/j.msea.2008.02.027 ↗
16. Liu · Ceram. Int. · 2007 · 33 · 42710.1016/j.ceramint.2005.10.016 ↗
17. Li · Mater. Lett. · 2008 · 62 · 313510.1016/j.matlet.2008.02.024 ↗
18. Kooi · Acta Metall. · 1999 · 47 · 3105
19. Iwamoto · Acta Mater. · 2002 · 50 · 74910.1016/S1359-6454(01)00388-3 ↗
20. Nomura · J. Mater. Sci. · 2000 · 35 · 395310.1023/A:1004833914798 ↗
21. Riccardi · J. Mater. Sci. · 2002 · 37 · 502910.1023/A:1021087632155 ↗
22. Martens · J. Mater. Process. Technol. · 1996 · 58 · 1310.1016/0924-0136(95)02103-5 ↗
23. Zhang · Mater. Chem. Phys. · 2002 · 75 · 25610.1016/S0254-0584(02)00072-X ↗
24. Zhang · J. Mater. Process. Technol. · 2002 · 122 · 22010.1016/S0924-0136(02)00010-9 ↗