Effects of grain size and precipitated phases on mechanical properties in TiAl gradient materials
Source abstract
Abstract
Abstract Effects of grain size and precipitated phases on creep properties, fracture toughness and crack propagation behavior are investigated in Ti-44Al-6Nb-1Cr-2V/Ti-44Al and Ti-44Al-6Nb-1Cr-2V-BY/Ti-44Al-6Nb-1Cr-2V gradient materials. Creep tests were performed at 850 °C/200 MPa and fracture toughness tests were performed at room temperature. Results show that the prepared gradient materials have continuing and subtle variation in composition. In Ti-44Al-6Nb-1Cr-2V/Ti-44Al, the content of γ + B2 precipitated phases increases with the increase of pulling length. The creep life decreases with the increase of the content of precipitated phases and the precipitated phases promote the crack and cavity nucleation. In Ti-44Al-6Nb-1Cr-2V-BY/Ti-44Al-6Nb-1Cr-2V, the grain size decreases with the increase of pulling length. The creep life decreases with the decrease of grain size and the fine lamellar colony provides an increasing opportunity for cavity nucleation at colony boundary. After fracture toughness tests, the crack tends to propagate along the precipitated phases and lamellar interface. The KIQ values decrease with the increase of the content of precipitated phases and they decrease with the decrease of grain size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
2. Deformation modes and size effect in near-γ TiAl alloys10.1016/j.msea.2016.09.092 ↗
3. Microstructure control and creep behavior of Ti-47Al-6Nb-0.1C alloy by directional solidification10.1016/j.intermet.2018.01.006 ↗
4. Microstructure evolution and mechanical properties of a Ti-45Al-8.5Nb-(W, B, Y) alloy obtained by controlled cooling from a single β region10.1016/j.jallcom.2017.12.326 ↗
5. Hot forging design and microstructure evolution of a high Nb containing TiAl alloy10.1016/j.intermet.2014.11.002 ↗
6. Microstructure control of Ti45Al8.5Nb, (W, B, Y) alloy during the solidification process10.1016/j.actamat.2016.04.021 ↗
7. Tailoring the microstructure of a β-solidifying TiAl alloy by controlled post-solidification isothermal holding and cooling10.1007/s11661-017-4209-4 ↗
8. Appel · 2011
9. Synergistic effect of Y and Nb on the high temperature oxidation resistance of high Nb containing TiAl alloys10.1016/j.intermet.2012.01.015 ↗
10. Microstructural refinement of boron-containing β-solidifying γ-titanium aluminide alloys through heat treatments in the β phase field10.1016/j.intermet.2012.08.010 ↗
11. Effects of V and B, Y additions on microstructure and creep behavior of high-Nb TiAl alloys10.1016/j.jallcom.2018.03.055 ↗
12. High temperature deformation behaviors of Ti-45Al-2Nb-1.5V-1Mo-Y alloy10.1016/j.intermet.2011.07.025 ↗
13. Functionally graded materials: a review of fabrication and properties10.1016/j.apmt.2016.10.001 ↗
14. Fabrication of functionally graded bulk materials of organic polymer blends by uniaxial thermal gradient10.1039/B614001G ↗
15. High throughput evaluation of the effect of Mg concentration on natural ageing of Al-Cu-Li-(Mg) alloys10.1016/j.scriptamat.2018.03.024 ↗
16. Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect10.12989/scs.2015.18.2.425 ↗
17. Fibrillar adhesion with no clusterisation: functional significance of material gradient along adhesive setae of insects10.3762/bjnano.5.95 ↗
18. Microstructure and mechanical property of laser melting deposition (LMD) Ti/GiAl structural gradient material10.1016/j.matdes.2009.07.004 ↗
19. Investigation of macro/microstructure evolution and mechanical properties of directionally solidified high-Nb TiAl-based alloy10.1016/j.matdes.2015.09.116 ↗
20. Experimental and numerical investigation on mass transfer induced by electromagnetic field in cold crucible used for directional solidification10.1016/j.ijheatmasstransfer.2017.06.039 ↗
21. Heat transfer and macrostructure formation of Nb containing TiAl alloy directionally solidified by square cold crucible10.1016/j.intermet.2013.06.008 ↗
22. Directional solidification of TiAl–W–Si alloy by electromagnetic confinement of melt in cold crucible10.1016/j.intermet.2012.07.018 ↗
23. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
24. Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale10.1016/j.intermet.2006.10.003 ↗
25. Microstructures and fracture toughness of Ti–(43–48)Al–2Cr–2Nb prepared by electromagnetic cold crucible directional solidification10.1016/j.matdes.2014.06.073 ↗
26. Fracture of convoluted and lamellar α2 + γ, TiAl alloys10.1016/j.intermet.2011.11.001 ↗