journal article·2009-02

On the relationship between microcasting process, material states and mechanical properties in the gold alloy Stabilor® G

Barbora Kasanická, Brando Okolo, Gundi Baumeister, Markus Auhorn, Tilmann Beck, Alexander Wanner, Jürgen Hausselt, Detlef Löhe, Volker Schulze

Materials Science and Engineering: A· Volume 501· Issue 1-2
Publisher page

Abstract

Abstract The present study reports on the microstructural state and mechanical properties of cast micro-components made from the commercial Au-alloy; Stabilor ® G. Microscopy methods such as optical light-, scanning- and transmission-electron microscopy were used to obtain a variety of microstructural properties from the micro-specimens. The mechanical properties of the cast micro-specimens were determined by tensile testing on a universal micro-testing device. These properties obtained for Stabilor ® G micro-specimens were found to depend on the casting method and thermal condition applied during and after the production process. The microstructure and mechanical attributes of the specimens were used to develop a model which makes it possible to predict the yield stress of the cast specimens from only the structural properties namely grain size and precipitate particle size. The individual influences of the strengthening factors in the specimens, such as grain boundary and precipitates, were determined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced Materials Characterization Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Sarkar · J. Dent. Res. · 1979 · 58 · 56810.1177/00220345790580020501 ↗
2. Ohta · J. Mater. Sci. · 1990 · 1 · 140
3. Corso · J. Dent. Res. · 1985 · 64 · 85410.1177/00220345850640051401 ↗
4. Nakagawa · J. Mater. Sci. · 1992 · 3 · 114
5. Watanabe · Dent. Mater. · 2001 · 17 · 38810.1016/S0109-5641(00)00096-8 ↗
6. Kim · J. Mater. Sci. · 1997 · 8 · 333
7. Lienfelder · J. Dent. Res. · 1972 · 51 · 90010.1177/00220345720510042901 ↗
8. Yasuda · J. Dent. Res. · 1982 · 61 · 47310.1177/00220345820610030601 ↗
9. Yasuda · Gold Bull. · 1987 · 20 · 9010.1007/BF03214661 ↗
10. Auhorn · Microsyst. Technol. · 2004 · 10 · 48910.1007/s00542-004-0378-3 ↗
11. Watanabe · Dent. Mater. · 2004 · 20 · 63010.1016/j.dental.2003.08.004 ↗
12. Auhorn · Microsyst. Technol. · 2006 · 12 · 71310.1007/s00542-006-0085-3 ↗
13. Beck · 2005 · 23
14. Anderson · 1990
15. G. Beck, H.-H. Beyer, W. Gerhartz, J. Haußelt, U. Zimmer (Eds.), Edelmetall-Taschenbuch, Degussa AG, Heidelberg, Hüthig, 1995, pp. 530–535.
16. Baumeister · Adv. Micro-Nanosyst. · 2005 · 4 · 35710.1002/9783527616732.ch1 ↗
17. B. Kasanická, Doctoral Thesis, University of Karlsruhe (TH), Shaker Verlag, Achen, 2008.
18. Baumeister · Microsyst. Technol. · 2004 · 10 · 216
19. Rohsenow · 1998
20. B. Kasanická, V. Schulze, D. Gerthsen, D. Löhe, in: H. Petzow (Ed.), Fortschritte in der Metallographie. 35, Berlin, Werkstoff-Informationsgesellschaft, 2004 (Sonderbände der praktischen Metallographie), pp. 451–456.
21. Kasanická · 2005 · 523
22. M. Auhorn, Doctoral Thesis, University of Karlsruhe (TH), Shaker Verlag, Aachen, 2006.
23. Faccenda · 2003
24. Metals Handbook, vol. 15, 9th edition, ASM International, in: C.E. West, T.E. Grubach (Eds.), Casting, Ohio, 1988, pp 276–277.
25. Navti · Comput. Methods Appl. Mech. Eng. · 1997 · 147 · 4110.1016/S0045-7825(97)00017-0 ↗
26. Hall · Proc. Phys. Soc. B · 1951 · 64 · 74710.1088/0370-1301/64/9/303 ↗
27. Petch · J. Iron Steel Inst. · 1953 · 174 · 25
28. Reppich · 1993 · vol. 6
29. Hull · 2001
30. CES 2005, EduPack, The teaching toolkit for materials and process engineering, Gold dental alloy, Jeneric Pentron “LDG 44” (hardened), Granta, 2005.
31. Udoh · J. Mater. Sci. · 1992 · 27 · 50410.1007/BF00543944 ↗