Microstructure, deformation mechanisms and influence of hydrogen on tensile properties of the Co based super alloy DIN 2.4711/UNS N30003
Source abstract
Abstract
Abstract The Co-based alloy 2.4711 investigated in this study consists of an austenitic martix with e-martensite from both strain hardening and aging. Upon deformation, the microstructure shows strain-induced γ→e transformation. Mechanical twinning could not be verified in this study using EBSD. Tensile testing in hydrogen gas and with H-precharged specimens revealed negligible embrittlement for the specimens tested in H 2 gas, whereas severe embrittlement was found for the H-precharged specimen. This was interpreted and explained by hydrogen transport during the two test configurations. It appears that the e-martensite in alloy 2.4711, unlike strain-induced martensite in type 304 austenitic stainless steels, does not enhance hydrogen ingress over long distances during tensile testing in gaseous hydrogen. Limiting hydrogen transport during testing in gaseous hydrogen precludes observation of intrinsic hydrogen effects, while saturation of hydrogen by H-precharging illuminates intrinsic hydrogen sensitivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Product information of Elgiloy, available at 〈www.elgiloy.com〉.
2. Product information of Phynox, available at 〈www.ugitech.com〉.
3. Product information of Conichrome, available at 〈www.fwmetals.com〉.
4. Martensitic transformation in a cast Co-Cr-Mo-C alloy10.1007/s11661-007-9370-8 ↗
5. TEM study for strengthening mechanisms in Elgiloy10.4028/www.scientific.net/KEM.442.268 ↗
6. Strengthening mechanisms in Elgiloy10.1007/BF01026957 ↗
7. HVEM studies of the effects of hydrogen on the deformation and fracture of AISI 316 austenitic stainless steels10.1016/0956-7151(90)90070-W ↗
8. Effect of alloying elements on hydrogen environment embrittlement of AISI type 304 austenitic stainless steel10.1016/j.ijhydene.2011.09.013 ↗
9. Tests on the steels 15 MnNi6 3 and X56TM in high pressure hydrogen gas of high purity10.1016/0360-3199(89)90005-0 ↗
10. C. San Marchi, D.K. Balch, B.P. Somerday, Effect of high-pressure hydrogen on fracture of austenitic steels, in: Proceedings of ASME Pressure Vessels and Piping Division Conference, 17–21 July, Denver, USA, 2005.10.1115/PVP2005-71392 ↗
11. Hydrogen-enhanced localized plasticity – a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
12. Environmentally assisted cracking: overview of evidence for an adsorption-induced localised-slip process10.1016/0001-6160(88)90113-7 ↗
13. Hydrogen related failure of steels – a new aspect10.1179/026708304225019687 ↗
14. Hydrogen embrittlement metals10.1016/0025-5416(72)90109-7 ↗
15. Fatigue crack propagation of a nickel-copper alloy in low-pressure hydrogen
16. Model of dislocation sweep-in of hydrogen during fatigue crack growth10.1016/0036-9748(75)90287-2 ↗
17. Modelling hydrogen transport by dislocations10.1016/j.jmps.2015.03.002 ↗
18. Numerical simulations of hydrogen-dislocation interactions in fcc stainless steels. Part II: hydrogen effects on crack tip plasticity at a stress corrosion crack10.1016/S1359-6454(02)00009-5 ↗
19. Hydrogen effects on the interaction between dislocations10.1016/S1359-6454(97)00349-2 ↗
20. Interpreting hydrogen-induced fracture surfaces in terms of deformation process: a new approach10.1016/j.actamat.2011.03.002 ↗
21. The role of localized deformation in hydrogen-assisted crack propagation in 21Cr-6Ni-9Mn stainless steel10.1016/j.actamat.2009.04.027 ↗
22. Hydrogen-assisted fracture of austenitic stainless steels
23. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
24. Hydrogen environment embrittlement of stable austenitic steels
25. Twinning and strain-induced fcc→hcp transformation on the mechanical properties of Co-Ni-Cr-Mo alloys10.1016/0025-5416(76)90234-2 ↗
26. Stacking fault probability and stacking fault energy in Co-Ni alloys
27. The slip character and low cycle fatigue behaviour: the influence of fcc twinning and strain-induced fcc→hcp martensitic transformation10.1016/0001-6160(80)90042-5 ↗
28. Effect of microstructure on hydrogen embrittlement of various stainless steels10.1016/j.msea.2013.07.004 ↗
29. Role of e martensite in tensile properties and hydrogen degradation of high-Mn steels10.1016/j.msea.2011.11.039 ↗
30. Influence of macro segregation on hydrogen environment embrittlement of SUS 316L stainless steel10.1016/j.ijhydene.2009.02.015 ↗
31. The effect of pre-straining and D-ferrite on the embrittlement of 304L stainless steel by hydrogen10.1016/0010-938X(93)90261-E ↗
32. Hydrogen environment embrittlement of austenitic stainless steels at low temperatures10.1016/j.ijhydene.2008.02.021 ↗
33. Hydrogen embrittlement testing at low temperatures and high pressures10.1016/j.corsci.2008.09.025 ↗
34. On the physical differences between tensile testing of type 304 and 316 austenitic stainless steels with internal hydrogen and in external hydrogen10.1016/j.ijhydene.2010.06.018 ↗
35. Stacking fault energies of seven commercial austenitic stainless steels10.1007/BF02641927 ↗
36. Effect of microstructure on hydrogen diffusion and trapping in a modified 9%Cr–1%Mo steel10.1016/j.msea.2009.08.025 ↗
37. Hydrogen diffusion in cobalt10.1016/0036-9748(74)90055-6 ↗
38. Diffusivity of hydrogen in cobalt at low temperatures
39. Hydrogen transport parameters for a cobalt based alloy10.1016/S0925-8388(96)03067-8 ↗
40. Permeability, solubility and diffusivity of hydrogen isotopes in stainless steels at high gas pressures10.1016/j.ijhydene.2006.05.008 ↗
41. Diffusion coefficients of hydrogen in Ni-Cu and Ni-Co alloys10.2320/matertrans1960.27.233 ↗