Effect of strain rate on deformation mechanism for ultrafine-grained interstitial-free steel
Source abstract
Abstract
Abstract Ultrafine-grained (UFG) interstitial-free steels with grain sizes of 0.39, 0.42, and 0.51 μm were used to ascertain effects of the strain rate ( e ) on the primary deformation mechanism at room temperature. Tensile tests were performed to obtain the strain-rate sensitivity exponent of 0.2% proof stress. The value was evaluated as 0.02 at high strain rates but as −0.01 at low strain rates. The transition was observed at e of 10−3 s−1 for each sample. Although the negative m value might result from strain aging, the influence of grain boundary sliding (GBS) increased remarkably at a low strain rate because it reached 76% of plastic strain and became about six times as much as that at a high strain rate. Therefore, it is claimed that the dominant deformation mechanism was changed by the strain rate from dislocation motion to GBS with decreasing strain rate across e ≈10−3 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Valiev · Acta Metall. Mater · 1994 · 42 · 246710.1016/0956-7151(94)90326-3 ↗
2. Tsuji · Scr. Mater · 2002 · 47 · 89310.1016/S1359-6462(02)00282-8 ↗
3. Valiev · Prog. Mater. Sci. · 2000 · 45 · 10810.1016/S0079-6425(99)00007-9 ↗
4. Huang · Science · 2006 · 312 · 24910.1126/science.1124268 ↗
5. Jiang · Acta Mater · 2008 · 56 · 122810.1016/j.actamat.2007.11.017 ↗
6. Tamimi · Mater. Design · 2009 · 30 · 255610.1016/j.matdes.2008.09.039 ↗
7. Tanaka · Scr. Mater · 2009 · 60 · 59010.1016/j.scriptamat.2008.12.018 ↗
8. Kato · Mater. Sci. Eng. A · 2009 · 516 · 27610.1016/j.msea.2009.03.035 ↗
9. Kahn · Nanostruc. Mater · 1997 · 9 · 60310.1016/S0965-9773(97)00135-9 ↗
10. Blum · Acta Mater · 2009 · 57 · 196610.1016/j.actamat.2008.12.041 ↗
11. Vinogradov · Mater. Sci. Eng. A · 2001 · 319–321 · 86210.1016/S0921-5093(01)01057-7 ↗
12. Ivanov · Scr. Mater · 2012 · 66 · 51110.1016/j.scriptamat.2011.12.039 ↗
13. Jia · Acta Mater. · 2003 · 51 · 349510.1016/S1359-6454(03)00169-1 ↗
14. Wei · Mater. Sci. Eng. A · 2004 · 381 · 7110.1016/j.msea.2004.03.064 ↗
15. Okitsu · Scr. Mater · 2011 · 64 · 89610.1016/j.scriptamat.2011.01.026 ↗
16. N. Kamikawa, R. Matsui, T. Furuhara, Collected Abstracts of 2012 Autumn Meeting of The Japan Institute of Metals (2012) S1–12.
17. Tsuji · Scr. Mater · 2002 · 47 · 6910.1016/S1359-6462(02)00088-X ↗
18. Bell · J. Mater. Sci. · 1967 · 2 · 31310.1007/BF00572414 ↗
19. Langdon · J. Mater. Sci. · 2006 · 41 · 59710.1007/s10853-006-6476-0 ↗
20. Wei · Mater. Sci. Eng. · 2004 · A381 · 7110.1016/j.msea.2004.03.064 ↗
21. Christian · Metall. Trans. A · 1983 · 14 · 123710.1007/BF02664806 ↗
22. Wei · J. Mater. Sci. · 2007 · 42 · 170910.1007/s10853-006-0700-9 ↗
23. Furukawa · Acta Mater · 1996 · 44 · 461910.1016/1359-6454(96)00105-X ↗
24. Davenport · Trans. ASM · 1935 · 23 · 1047
25. Sachdev · Metal. Trans. A · 1982 · 13 · 1973
26. Canadinc · Scr. Mater · 2008 · 59 · 110310.1016/j.scriptamat.2008.07.027 ↗