Correctness of the Theories of Plasticity Taking into Account the Mutual Influence of the Mechanisms of Inelastic Deformation
Source abstract
Abstract
Within the framework of a version of the theory of plasticity based on the concept of sliding, we consider the development of deformation for three types of loading paths: rectilinear, stepwise, and saw-tooth, located inside a strip of small width (2h). It is shown that, in the case of contraction of this strip into a rectilinear path, the strains formed for the indicated types of loading coincide in the limit as h → 0. This completely agrees with the experimental data and contradicts the conclusions made by Klyushnikov (Physical and Mathematical Foundations of Strength and Plasticity, Moscow State University, Moscow, 1994). It is also shown that Klyushnikov's assertions concerning the differential nonpotentiality of the constitutive equations of the theory of plasticity taking into account the mutual influence of the mechanisms of inelastic deformation are incorrect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical and Geomechanical Engineering · Structural mechanics and materials · Elasticity and Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. M. Yu. Shvaiko, “On the theory of plasticity based on the concept of sliding,” Prikl. Mekh., 12, No. 11, 12–24 (1976).
2. V. D. Klyushnikov, Physical and Mathematical Foundations of Strength and Plasticity (Elements of the Theory of Determining Relations) [in Russian], Moscow University, Moscow (1994).
3. M. Yu. Shvaiko, Complex Loading and Problems of Stability [in Russian], Dnepropetrovsk University, Dnepropetrovsk (1989).
4. M. Yu. Shvaiko, “On the theory of plasticity with smooth loading surfaces,” Fiz. Khim. Mekh. Mater., 33, No. 6, 63–70 (1997).
5. M. Yu. Shvaiko, “On the possible general form of the hardening function of a linear plane plastic medium,” Gidroaéromekh. Teor. Uprug., No. 14, 109–120 (1972).
6. M. Ya. Leonov and M. Yu. Shvaiko, “Complex plane deformation,” Dokl. Akad. Nauk SSSR, 159, No. 2, 1007–1010 (1964).
7. A. A. Il'yushin and V. S. Lenskii, “A model and an algorithm,” in: Applied Problems of Strength and Plasticity [in Russian], Issue 1, Gorky (1975), pp. 3–18.
8. Yu. I. Kadashevich, V. V. Novozhilov, and Yu. A. Chernyakov, “Theory of plasticity and creep based on the analysis of microstrains,” Prikl. Mat. Mekh., 50, No. 6, 890–897 (1986).
9. I. V. Knets, Basic Contemporary Trends in the Mathematical Theory of Plasticity [in Russian], Zinatne, Riga (1971).
10. M. Ya. Leonov, “Elements of the analytic theory of plasticity,” Dokl. Akad. Nauk SSSR, 205, No. 2, 303–306 (1972).
11. M. Ya. Leonov, Mechanics of Deformation and Fracture [in Russian], Ilim, Frunze (1981).
12. T. G. Lin', “Physical theory of plasticity,” in: Problems of the Theory of Plasticity [in Russian], Mashgiz, Moscow (1976), pp. 7–68.
13. V. A. Likhachev and V. G. Malinin, “On the equations of the general theory of plasticity of crystals,” Izv. Vyssh. Uchebn. Zaved., Fiz., No. 6, 73–77 (1988).
14. V. A. Likhachev and V. G. Malinin, “A physicomechanical model of elastoplastic properties of materials taking into account the structural levels of strains and kinetic properties of actual crystals,” Izv. Vyssh. Uchebn. Zaved., Fiz., No. 9, 23–28 (1984).
15. A. K. Malmeister, “Foundations of the theory of local strains,” Mekh. Polimer., No. 4, 12–27 (1965).
16. A. K. Malmeister, V. P. Tamuzh, and G. A. Tetrs, Strength of Rigid Polymeric Materials [in Russian], Zinatne, Riga (1967).
17. A. I. Mokhel', R. L. Salganik, and S. A. Khristianovich, “Plastic strains in hardened metals and alloys. Constitutive equations and numerical calculations performed according to these equations,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 4, 119–141 (1983).
18. V. V. Novozhilov, Yu. I. Kadashevich, and Yu. A. Chernyakov, “Theory of plasticity based on the analysis of microstrains,” Dokl. Akad. Nauk SSSR, 284, No. 4, 821–823 (1985).
19. Yu. N. Rabotnov, “A model illustrating some properties of hardening plastic bodies,” Prikl. Mat. Mekh., 23, No. 1, 164–169 (1959).
20. K. N. Rusinko, Theory of Plasticity and Nonsteady Creep [in Russian], Vyshcha Shkola, Lviv (1981).
21. K. N. Rusinko, Specific Features of Inelastic Deformation of Solid Bodies [in Russian], Vyshcha Shkola, Lviv (1986).
22. S. A. Khristianovich, “Deformation of hardening plastic materials” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 2, 148–174 (1974).
23. S. A. Khristianovich and E. I. Shemyakin, “Plane deformation of a plastic material under complex loading,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 5, 138–149 (1969).
24. B. Budiansky and T. T. Wu, “Theoretical prediction of plastic strain of polycrystals,” in: Proc. of the First U.S. Nat. Congr. on Applied Mechanics (1962), pp. 1175–1185.
25. R. F. Bishop and R. A. Hill, “Theoretical derivation of the plastic properties of a polycrystalline face centered metal,” Phil. Mag., 42, No. 7, 1298–1307 (1951).10.1080/14786444108561385 ↗
26. T. N. Lin, “Analysis of elastic and plastic strains of a face centered cubic crystal,” J. Mech. Phys. Solids, 5, 143–149 (1957).10.1016/0022-5096(57)90058-3 ↗
27. G. I. Taylor, “Plastic strain in metals,” J. Inst. Metals, 62, No. 1, 307–324 (1938).
28. G. J. Weng, “Constitutive equations of crystals and polycrystalline aggregates under cyclic loading,” Int. J. Eng. Sci., 18, 1385–1397 (1980).10.1016/0020-7225(80)90095-6 ↗