Variations of the impact toughness of 12Kh1MF steel in operating steam pipelines of thermal power plants
Source abstract
Abstract
It is shown that, in the intact state, the impact toughness of 12Kh1MF steel at room temperature is, as a rule, higher than at the elevated temperature (545°C) for metals both with fair and defective microstructures. It is demonstrated that, under the conditions of long-term operation of the steam pipelines of thermal power plants at room temperature, the impact toughness of steel usually decreases. However, at the working temperature, its changes are insignificant. Hence, the brittle-fracture resistance of the metal at room temperature becomes lower than that at the elevated (working) temperature. We reveal the cases of anisotropy of the impact toughness of the metal cut out from a bend of the steam pipeline with cracklike defects. A correlation dependence of the impact toughness at room temperature on the relative narrowing obtained in the tests for static tension is established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. SOU MPE 40.1.17.401:2004. Monitoring of the Metal and Extension of the Service Life of the Main Elements of Boilers, Turbines, and Pipelines of Thermal Power Plants. Standard Instruction [in Ukrainian], “GRIFRE” Concern, Kiev (2005).
2. N. V. Bugai, G. V. Mukhopad, and A. Ya. Krasovskii, Improvement of the Reliability of Boilers of Electric Power Plants [in Russian], Tekhnika, Kiev (1986).
3. GOST 9454-78 (ST SÉV 472-77, ST SÉV 473-77). Metals. A Method for Testing by Impact Bending at Low, Room, and Elevated Temperatures [in Russian], Izd. Standartov, Moscow (1979).
4. TU 14-3-460-2003. Weldless Steel Pipes for Steam Boilers and Pipelines [in Ukrainian], Osada Institute of Pipe Industry, Dnipropetrovs’k (2003).
5. GOST 1497-84 (ISO 6892-84, ST SÉV 471-88). Metals. A Method for Testing by Tension [in Russian], Izd. Standartov, Moscow (1985).
6. O. I. Balyts’kyi, I. V. Ripei, and Kh. A. Protsakh, “Reliability of steam pipelines of thermal power plants in the course of long-term operation,” Mater. Sci., 42, No. 4, 461–465 (2006).10.1007/s11003-006-0101-x ↗
7. A. B. Vainman, R. K. Melekhov, and O. D. Smiyan, Hydrogen Embrittlement of High-Pressure Boilers [in Russian], Naukova Dumka, Kiev (1990).
8. O. Z. Student, A. D. Markov, and H. M. Nykyforchyn, “Specific features of the influence of hydrogen on the properties and mechanism of fracture of the metal of welded joints of steam pipelines at thermal power plants,” Mater. Sci., 42, No. 4, 451–460 (2006).10.1007/s11003-006-0100-y ↗
9. H. Krechkovs’ka, A. Markov, and I. Ripei, “Properties of 15Kh1M1F steel after operation in the main steam pipeline of a thermal power plant,” Fiz.-Khim. Mekh. Mater., 44, Special Issue No. 7, 844–847 (2008).
10. Hong Xu, Xue-Kun Huang, Zhen Yang, and Ji-ti Pan, “Property changes of 12Cr1MoV with 10CrMo910 main steam piping after long-term high-temperature service,” Eng. Fail. Anal., No. 10, 245–250 (2003).
11. P. A. Antikain, Metals and Strength Analyses of Boilers and Pipelines [in Russian], Énergoatomizdat, Moscow (1990).
12. M. V. Meiklyar, Operation of the Metal of Steam Boilers [in Russian], Gosénergoizdat, Moscow–Leningrad (1961).
13. J. Foulds and R. Viswanathan, “Small punch testing for determining the material toughness of low-alloy steel components in service,” J. Eng. Mater. Tech., 116, No. 4, 457–464 (1994).10.1115/1.2904313 ↗
14. K. Daeves (editor), Werkstoff-Handbuch Stahl und Eisen, Stahleisen, Düsseldorf (1965).